

Light up bowtie
- Size
- 121.6 × 60.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 19
- Pads
- 66
- Tracks, vias
- 111, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Feb 2024
- Updated
- 17 Mar 2024
Overview
Light up bowtie is an open-source printed circuit board by gpro1, from the gpro1/light_up_bowtie repository on GitHub. It is a 2-layer board of 121.6 × 60.2 mm with 27 parts on 19 nets, routed with 111 tracks and 8 vias.
It is built around the ATTINY85-20SU, AP2112K-3.3 and BU2032-1-HD-G. Its parts include 8 resistors, 5 diodes, 3 capacitors, 2 ICs and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY85-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedBU2032-1-HD-G
--40℃~+280℃ - Button And Strip Battery Connector ROHSMPDButton And Strip Battery Connector
README
README.mdlight_up_bowtie
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 150 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R5, R6, R7, R8 |
| 5 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D4, D5 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2 |
| 2 | BU2032-1-HD-G | BU2032_1_HD_G:BAT_BU2032-1-HD-G | BT1, BT2 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | ATtiny85-20S | Package_SO:SOIC-8W_5.3x5.3mm_P1.27mm | U2 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | SW_SPDT | light_up_bowtie:EG1218 | SW1 |
The 23 most common of 27 parts.
Similar boards
- 2 layers40 × 51.5 mm

- 2 layers65 × 56.5 mm

SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
122 parts600 - 2 layers18.8 × 8.1 mm

Dell charger emulator
KivApple/dell-charger-emulator
Emulator of original Dell charger using ATTINY85
6 parts154 - 2 layers14 × 17.3 mm

- 2 layers43.9 × 29 mm

C64Saver2-addon
bwack/C64-Saver-bwack
C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.
43 parts124 - 2 layers61 × 36.8 mm

- 2 layers200 × 100 mm

Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers134.3 × 140 mm

Questions
How big is the Light up bowtie PCB?
It measures 121.6 × 60.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Light up bowtie use?
27 parts, built around the ATTINY85-20SU, AP2112K-3.3 and BU2032-1-HD-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Light up bowtie KiCad files?
From the gpro1/light_up_bowtie repository on GitHub, at the commit this page was made from: the board is Light_Up_Bowtie_Hardware/light_up_bowtie/light_up_bowtie.kicad_pcb and its schematic Light_Up_Bowtie_Hardware/light_up_bowtie/light_up_bowtie.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Light up bowtie design in my own project?
Its repository states no licence, so its author keeps all rights: ask gpro1 before reusing the design.