

StepUP lcd
- Size
- 180 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 34
- Pads
- 133
- Tracks, vias
- 386, 21
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Jun 2020
- Updated
- 20 Jul 2024
Overview
StepUP lcd is an open-source printed circuit board by Govish, from the Govish/stepUP-Electronics-2-0 repository on GitHub. It is a 2-layer board of 180 × 90 mm with 44 parts on 34 nets, routed with 386 tracks and 21 vias.
It is built around the P82B715D. Its parts include 14 resistors, 3 diodes, 3 connectors, 2 capacitors and 2 ICs. It belongs with the lEDs and displays boards of this library.
Main components
1README
README.mdstepUP-Electronics-2-0
New Electronics Suite for the stepUP 3D Printer! New Electronics include:
- An updated LCD control panel loosely based off the Panelolu2
- New printer mainboard
- Arduino DUE printer controller running Marlin 2.0
- ESP32 acting as WiFi server through ESP3D
- Multiplexed SD card allowing read/write access to both the ESP32 and the Arduino DUE
- TMC2130 Stepper Drivers with SPI configuration and connected diagnostic pins
- RGB LED light strip control
- High-power 20A heated bed control
- ATX PSU control
- Black ribbon cable wiring all throughout the machine with PCB breakouts
- Full connectorization
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H7, H8, H9, H10, H11, H12, H13, H14, H15 |
| 6 | 390R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R8, R9, R10, R11, R12 |
| 5 | MountingHole | MountingHole:MountingHole_5.3mm_M5_Pad | H2, H3, H4, H5, H6 |
| 3 | 0R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R5, R6 |
| 3 | LED | Custom-DiscreteSemi:LED_1206ReverseMount | D1, D2, D3 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C3 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R101, R102 |
| 2 | 4K7 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R3 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 1 | Buzzer | Custom-Electromechanical:Buzzer_CUI_CPT9019S | BZ1 |
| 1 | Conn_01x18 | Connector_PinHeader_2.54mm:PinHeader_1x18_P2.54mm_Vertical_SMD_Pin1Left | J3 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical_SMD | J2 |
| 1 | Conn_02x05_Odd_Even | Custom-Electromechanical:PinHeader_2x05_P2.54mm_Shrouded | J1 |
| 1 | Hot Icon | Custom-Graphics:Icon_Temp | G103 |
| 1 | MCP23017_SS | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U3 |
| 1 | MountingHole | Custom-Mechanical:RGB_Encoder_Hole | H1 |
| 1 | P82B715 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | R_POT | Custom-Electromechanical:Potentiometer_Vishay_TS53YJ | RV1 |
| 1 | SD Icon | Custom-Graphics:Icon_SD | G102 |
| 1 | Stepper Icon | Custom-Graphics:Icon_Stepper | G101 |
More from Govish/stepUP-Electronics-2-0
7- 2 layers192.5 × 165 mm

- 2 layers29 × 50 mm

- 2 layers90.8 × 84.3 mm

- 2 layers70 × 28 mm

- 2 layers29 × 28 mm

- 2 layers17.8 × 10.2 mm

- 2 layers26 × 19 mm

Similar boards
- 2 layers66 × 99.7 mm

- 4 layers64.3 × 22.9 mm

- 2 layers61 × 139.2 mm

New joy board
deets/new-joy-tracker
Micropython Code for the New Joy Theater piece in Bochum
44 partsMIT - 4 layers60 × 50 mm

- 2 layers68 × 40 mm

- 4 layers90 × 90 mm

02 connectivity
tomek-szczesny/byos_m2
Build Your Own System - a collection of stackable add-ons
110 parts - 2 layers34.5 × 25 mm

CameraController
UCLA-CUB/CameraControllerBoard
Schematic and PCB for the camera gimbal controller.
25 parts - 2 layers53.2 × 35.6 mm

Questions
How big is the StepUP lcd PCB?
It measures 180 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the StepUP lcd use?
44 parts, built around the P82B715D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the StepUP lcd KiCad files?
From the Govish/stepUP-Electronics-2-0 repository on GitHub, at the commit this page was made from: the board is stepUP LCD Panel/stepUP_lcd/stepUP_lcd.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the StepUP lcd design in my own project?
Its repository states no licence, so its author keeps all rights: ask Govish before reusing the design.