Skip to the content
12345678

P82B715D

Texas InstrumentsExtended

-40℃~+85℃ 2 2-Wire Bus 250ns 4.5V~12V 400pF Buffer LDA、LCL SOIC-8 Signal Buffers, Repeaters, Splitters ROHS

Part id
ti/P82B715D
Category
Signal Buffers, Repeaters, Splitters
Package
SOIC-8
Pins
8
In stock
7,758 at JLCPCB (C2649394)
Used on
18 open-source boards

Overview

The P82B715D is a signal Buffers, Repeaters, Splitter made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+85℃ 2 2-Wire Bus 250ns 4.5V~12V 400pF Buffer LDA、LCL SOIC-8 Signal Buffers, Repeaters, Splitters ROHS.

PCBKit's library has its KiCad symbol (Analog & Interface:P82B715, from CERN's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 7,758 are in stock at JLCPCB (part C2649394). 18 open-source boards in 12 repositories on GitHub use it.

Symbol

3Sx6Sy1NC8VCC2Lx7Ly5NC4GND
Analog & Interface:P82B715From CERN's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

10
Supply, least
4.5 V · VCC, recommended operating min · p. 4
Supply, most
12 V · VCC, recommended operating max · p. 4
Supply, absolute maximum
12 V · VCC, absolute max · p. 4
Works from
-40 °C · Operating free-air temperature min · p. 4
Works up to
85 °C · Operating free-air temperature max · p. 4
Takes working
14 mA · VCC quiescent supply current typical, Sx = Sy = VCC, VCC = 5 V · p. 5
A pin gives at most
60 mA · Sx or Sy continuous output current absolute max · p. 4
Junction to air (D (SOIC))
105.3 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (D (SOIC))
51.1 K/W · Junction-to-case (top) thermal resistance · p. 4
Junction to board (D (SOIC))
46.2 K/W · Junction-to-board thermal resistance · p. 4

What it is and has

5
Function
I2C bus extender · p. 1
Buffer
Dual bidirectional unity-voltage-gain buffer · p. 1
Directional control
No external directional control required · p. 1
Buffered bus capacitance
Around 3000 pF · p. 7
Package
D, 8-pin SOIC · p. 3

Around it

4
res 4700 Ω
between Sx and VCC; Example pullup for Sx; also applies to Sy. · p. 9
res 330 Ω
between Lx and VCC; Example pullup for Lx; also applies to Ly. · p. 9
cap 1 μF
between VCC and GND; Typical larger bypass capacitor for short power supply glitches. · p. 13
cap 0.1 μF
between VCC and GND; Typical smaller decoupling capacitor to filter high-frequency ripple. · p. 13

Specifications

30
ParameterConditionsAs printedPage
Supply voltage VCCOver operating free-air temperature rangemin -0.3 · max 12 V4
I2C bus voltage VbSx or Sy; maximum VCCmin 0 V4
Buffered bus voltage VbLx or Ly; maximum VCCmin 0 V4
Continuous output current IOSx or Symax 60 mA4
Continuous output current IOLx or Lymax 60 mA4
Continuous current through VCC or GND ICCOver operating free-air temperature rangemax 60 mA4
Storage temperature Tstgmin -55 · max 125 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2500 Vmin -2500 · max 2500 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; ±1000 Vmin -1000 · max 1000 V4
Electrostatic discharge V(ESD)Machine model (MM); ±400 Vmin -400 · max 400 V4
Supply voltage VCCReduced-performance operation possible down to 3 Vmin 4.5 · max 12 V4
Operating free-air temperature TAmin -40 · max 85 °C4
Junction-to-ambient thermal resistance RθJAD (SOIC), 8 pinstyp 105.3 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)D (SOIC), 8 pinstyp 51.1 °C/W4
Junction-to-board thermal resistance RθJBD (SOIC), 8 pinstyp 46.2 °C/W4
Junction-to-top characterization parameter ψJTD (SOIC), 8 pinstyp 8.5 °C/W4
Junction-to-board characterization parameter ψJBD (SOIC), 8 pinstyp 45.6 °C/W4
Quiescent supply current ICCVCC = 5 V, TA = 25°C; Sx = Sy = VCCtyp 14 mA5
Quiescent supply current ICCVCC = 12 V, TA = 25°Ctyp 15 mA5
Quiescent supply current ICCVCC = 5 V, TA = 25°C; both I2C inputs low, both buffered outputs sinking 30 mAtyp 22 mA5
Output sink current on I2C bus IIOSTA = 25°C; Sx, Sy; VCC > 3 V; VSx, VSy (low) = 0.4 V; VLx, VLy (low) on buffered bus = 0.3 V; ILx, ILy = –3 mA; buffer passivemin 2.6 mA5
Output sink current on buffered bus IIOLVCC = 5 V, TA = 25°C; Lx, Ly; VLx, VLy (low) = 0.4 V; VSx, VSy (low) on I2C bus = 0.3 Vmin 30 mA5
Output sink current on buffered bus IIOLTA = 25°C; Lx, Ly; 3 V < VCC < 4.5 V; VLx, VLy (low) = 0.4 V to 1.5 V; ISx, ISy sinking on I2C bus < –4 mAmin 24 mA5
Output sink current on buffered bus IIOLTA = 25°C; Lx, Ly; 3 V < VCC < 4.5 V; VLx, VLy (low) = 1.5 V to VCC; ISx, ISy sinking on I2C bus = –7 mAmin 24 mA5
Input current from I2C bus IIVCC = 5 V, TA = 25°C; Sx, Sy; ILx, ILy sink on buffered bus = 30 mAmax -3.2 mA5
Input current from buffered bus IITA = 25°C; Lx, Ly; VCC > 3 V; ISx, ISy sink on I2C bus = 3 mA; buffer passivemax -3 mA5
Leakage current on buffered bus IITA = 25°C; Lx, Ly; VCC = 3 V to 12 V; VLx, VLy = VCC; VSx, VSy = VCCmax 200 uA5
Input/output impedance Zin/ZoutVCC = 5 V, TA = 25°C; VSx < VLx, Buffer is activemin 8 · typ 10 · max 135
Delay time to VLx voltage crossing VCC/2 for input drive current step ISx at Sx trise/fallVCC = 5 V, TA = 25°C, no capacitive loads; RLx pullup = 270 Ω; ISx to VLx, ISy to VLytyp 250 ns5
Buffer delay time, switching edges between VLx input and VSx output trise/fallVCC = 5 V, TA = 25°C, no capacitive loads; RLx pullup = 4700 Ω; VLx to VSx, VLy to VSytyp 0 ns5

Pins, by the datasheet

8
1 NC
No connection. · p. 3
2 Lx
Buffered serial data bus or LDA. · p. 3
3 Sx
Serial data bus or SDA. Connect to VCC of I2C master through a pullup resistor. · p. 3
4 GND
Ground. · p. 3
5 NC
No connection. · p. 3
6 Sy
Serial clock bus or SCL. Connect to VCC of I2C master through a pullup resistor. · p. 3
7 Ly
Buffered serial clock bus or LCL. · p. 3
8 VCC
Supply voltage. · p. 3

Ordering codes, by the datasheet

6
P82B715D
SOIC-8 · D package; package quantity 75; operating temperature -40 to 85 °C · p. 15
P82B715DG4
SOIC-8 · D package; package quantity 75; operating temperature -40 to 85 °C · p. 15
P82B715DR
SOIC-8 · D package; package quantity 2500; operating temperature -40 to 85 °C · p. 15
P82B715DRG4
SOIC-8 · D package; package quantity 2500; operating temperature -40 to 85 °C · p. 15
P82B715P
PDIP-8 · P package; package quantity 50; operating temperature -40 to 85 °C · p. 15
P82B715PE4
PDIP-8 · P package; package quantity 50; operating temperature -40 to 85 °C · p. 15

Open-source boards using it

18See all 18
  • 2 layers66 × 99.7 mmAirMon, the printed circuit board in 3D

    AirMon

    SG-O/airMon

    ESP32 based air quality monitor PCB

    130 parts2CC-BY-4.0
  • 4 layers64.3 × 22.9 mmHybrid pmod v2, the printed circuit board in 3D

    Hybrid pmod v2

    bl0x/hydra_hybrid_pmod

    Adapter PCB from PMOD to VMM hybrid

    32 parts
  • 2 layers61 × 139.2 mmNew joy board, the printed circuit board in 3D

    New joy board

    deets/new-joy-tracker

    Micropython Code for the New Joy Theater piece in Bochum

    44 partsMIT
  • 4 layers60 × 50 mmMother v1 0 0, the printed circuit board in 3D

    Mother v1 0 0

    kaga1minn0nnn4/EtoC_PCB

    137 parts
  • 2 layers68 × 40 mmMaster, the printed circuit board in 3D

    Master

    Kybernetika-SPSE/DMP_Vagner

    74 parts
  • 4 layers90 × 90 mm02 connectivity, the printed circuit board in 3D

    02 connectivity

    tomek-szczesny/byos_m2

    Build Your Own System - a collection of stackable add-ons

    110 parts
  • 2 layers34.5 × 25 mmCameraController, the printed circuit board in 3D

    CameraController

    UCLA-CUB/CameraControllerBoard

    Schematic and PCB for the camera gimbal controller.

    25 parts

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the P82B715D?

Yes. The symbol is Analog & Interface:P82B715 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the P82B715D?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the P82B715D datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the P82B715D?

JLCPCB lists it as part C2649394, with 7,758 in stock; the sellers' links on this page open their listings.

What can replace the P82B715D?

Parts like it in the library: the PCA9510AD by NXP Semiconductors. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the P82B715D?

18 boards in 12 repositories on GitHub; the most starred are listed on this page, with their KiCad files.