2 layers34.5 × 25 mm CameraController, the printed circuit board in 3D

CameraController

Schematic and PCB for the camera gimbal controller.

Size: 34.5 × 25 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 25
Nets: 21
Pads: 85
Tracks, vias: 520, 35
Pours: 2
Routed: Yes
KiCad: KiCad 4
Created: 1 Feb 2018
Updated: 1 Feb 2018

Overview

CameraController is an open-source printed circuit board by UCLA-CUB, from the UCLA-CUB/CameraControllerBoard repository on GitHub. It is a 2-layer board of 34.5 × 25 mm with 25 parts on 21 nets, routed with 520 tracks and 35 vias.

It is built around the MSP430G2231IN14 and P82B715D. Its parts include 8 capacitors, 7 connectors, 4 resistors, 3 ICs and 1 diode. It belongs with the MSP430 boards of this library.

Main components

Category and platform

MSP430

Project files

Show this board on your page

https://pcbkit.io/boards/UCLA-CUB/CameraControllerBoard

The board's own page, for a message or a post.

Source

Repository: UCLA-CUB/CameraControllerBoard
Board file: CameraController.kicad_pcb
Commit: 67b96e3
Licence: Not stated

Parts

Qty	Value	Footprint	References
4	CONN_01X03	Pin_Headers:Pin_Header_Straight_1x03	P2, P3, P6, P7
2	0.001uF	Capacitors_SMD:C_0402	C2, C5
2	0.1uF	Capacitors_SMD:C_0402	C4, C6
2	100uF	Misc_SMD:c_elec_3.5x5.6	C7, C8
2	2.2K	Resistors_SMD:R_0603	R1, R3
2	4.7uF	Capacitors_SMD:C_0603	C1, C3
2	CONN_01X04	Pin_Headers:Pin_Header_Straight_1x04	P1, P5
1	27K	Resistors_SMD:R_0402	R4
1	47K	Resistors_SMD:R_0402	R2
1	AP2114H	TO_SOT_Packages_SMD:SOT-223	U2
1	CONN_01X06	Misc_TH:DIN_TH_6POL	P4
1	GREEN LED	LEDs:LED_0603	D1
1	MSP430G2231IN14	Housings_SSOP:TSSOP-14_4.4x5mm_Pitch0.65mm	U3
1	P82B715	Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm	U1
1	Q_NPN_BEC	TO_SOT_Packages_SMD:SOT-23	Q1
1	SW_PUSH	Misc_SMD:SW_SPST_TL3315	SW1

Similar boards

2 layers
Peltier Boost + MSP430
mjbella/TeaTimerPCB

22 parts
2 layers31.2 × 10.2 mm
ULightHouse v1.1
navan93/uLightHouse
A tiny LED circuit which lights up in the dark.
10 partsMIT
2 layers66 × 99.7 mm
AirMon
SG-O/airMon
ESP32 based air quality monitor PCB
130 parts2CC-BY-4.0
4 layers64.3 × 22.9 mm
Hybrid pmod v2
bl0x/hydra_hybrid_pmod
Adapter PCB from PMOD to VMM hybrid
32 parts
2 layers61 × 139.2 mm
New joy board
deets/new-joy-tracker
Micropython Code for the New Joy Theater piece in Bochum
44 partsMIT
2 layers192.5 × 165 mm
Quickstep controller RevII
Govish/stepUP-Electronics-2-0

252 parts
4 layers60 × 50 mm
Mother v1 0 0
kaga1minn0nnn4/EtoC_PCB

137 parts
2 layers68 × 40 mm
Master
Kybernetika-SPSE/DMP_Vagner

74 parts

Questions

How big is the CameraController PCB?

It measures 34.5 × 25 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CameraController use?

25 parts, built around the MSP430G2231IN14 and P82B715D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CameraController KiCad files?

From the UCLA-CUB/CameraControllerBoard repository on GitHub, at the commit this page was made from: the board is CameraController.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the CameraController design in my own project?

Its repository states no licence, so its author keeps all rights: ask UCLA-CUB before reusing the design.