

ButtonInterfaceBoard 0-2
Design files and documentation for the FusIon Battery Pack
- Size
- 36.8 × 47 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 31
- Pads
- 112
- Tracks, vias
- 210, 20
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Feb 2019
- Updated
- 27 Mar 2020
Overview
ButtonInterfaceBoard 0-2 is an open-source printed circuit board by Govish, from the Govish/FusIon-Pack repository on GitHub, published under the MIT licence. It is a 2-layer board of 36.8 × 47 mm with 36 parts on 31 nets, routed with 210 tracks and 20 vias.
It is built around the ATTINY24A-SSU, W25Q16JVSSIQ and PACDN042Y3R. Its parts include 12 resistors, 9 connectors, 7 capacitors, 5 diodes and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY24A-SSU
SOIC-14-40℃~+85℃ 1.8V~5.5V 10bit 12 128Byte 128Byte 20MHz 2KB 8 Bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)W25Q16JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHPACDN042Y3R
SOT-23-40℃~+85℃ 1nA 2 30pF 5.5V、6.1V 6.2V 6.8V ESD IEC 61000-4-2 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)
README
README.mdFusIon-Pack
Design files and documentation for the FusIon Battery Pack
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R5, R6, R12 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C3, C6 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R4, R8, R10 |
| 3 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4, C5, C7 |
| 3 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J5, J6 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J8 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4, J9 |
| 2 | RED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4, D5 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 1 | 240K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7 |
| 1 | 36R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9 |
| 1 | 390R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11 |
| 1 | 5.1V | Diode_SMD:D_SOD-323_HandSoldering | D2 |
| 1 | ATA6561 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | ATtiny24A-SSU | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J7 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | PACDN042 | Package_TO_SOT_SMD:SOT-23_Handsoldering | D1 |
| 1 | SESDONCAN1LT1G | Package_TO_SOT_SMD:SOT-23_Handsoldering | D3 |
| 1 | W25Q16JVSSIQ | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U1 |
More from Govish/FusIon-Pack
7- 4 layers155.2 × 187.2 mm

- 2 layers52.1 × 81.3 mm

AFE SubBoard 0-2
Govish/FusIon-Pack
Design files and documentation for the FusIon Battery Pack
145 partsMIT - 2 layers53.3 × 38.1 mm

PowerStage SubBoard 0-2
Govish/FusIon-Pack
Design files and documentation for the FusIon Battery Pack
71 partsMIT - 2 layers63.5 × 25.4 mm

USB LED Daughterboard 0-2
Govish/FusIon-Pack
Design files and documentation for the FusIon Battery Pack
61 partsMIT - 2 layers27.9 × 65.4 mm

Charger SubBoard 0-2
Govish/FusIon-Pack
Design files and documentation for the FusIon Battery Pack
59 partsMIT - 2 layers46.4 × 25.4 mm

Buck Converter SubBoard 0-2
Govish/FusIon-Pack
Design files and documentation for the FusIon Battery Pack
33 partsMIT - 2 layers76.7 × 35 mm

Fusion USB Daughter Board
Govish/FusIon-Pack
Design files and documentation for the FusIon Battery Pack
28 partsMIT
Similar boards
- 4 layers93.5 × 101 mm

- 4 layers125.3 × 86 mm

Project Atlas
higg22-git/Project-Atlas
Four-layer STM32G474 control board that replaced the legacy electronics on BYU Formula SAE Electric's race car. KiCad schematic, layout and manufacturing package.
124 parts - 2 layers35 × 35 mm

- 2 layers51.3 × 18.3 mm

Exbike usb hw
03vmate/exercisebike-usb-interface
AVR MCU based USB interface for exercise bike
19 parts - 2 layers46.5 × 30.2 mm

- 2 layers

Power module
Bakirov-Artur/PWR_MIC_LI-ION_module
li-ion 18650 battery(foot print HB-18650-PC4), 1S PCB/PCM(XZD-YH10A-1)
33 parts - 2 layers100 × 50 mm

- 2 layers58 × 48 mm

Questions
How big is the ButtonInterfaceBoard 0-2 PCB?
It measures 36.8 × 47 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ButtonInterfaceBoard 0-2 use?
36 parts, built around the ATTINY24A-SSU, W25Q16JVSSIQ and PACDN042Y3R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ButtonInterfaceBoard 0-2 KiCad files?
From the Govish/FusIon-Pack repository on GitHub, at the commit this page was made from: the board is REV 0-2 PCB/FlatPack 0-2/ButtonInterfaceBoard 0-2/ButtonInterfaceBoard 0-2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ButtonInterfaceBoard 0-2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).