

Thermometer bausatz
Bausatz LED-Thermometer
- Size
- 100 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 14
- Pads
- 52
- Tracks, vias
- 175, 59
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Jun 2024
- Updated
- 14 Oct 2026
Overview
Thermometer bausatz is an open-source printed circuit board by darc-s09, from the darc-s09/thermometer-bausatz repository on GitHub. It is a 2-layer board of 100 × 50 mm with 22 parts on 14 nets, routed with 175 tracks and 59 vias.
It is built around the ATTINY24A-SSU. Its parts include 11 diodes, 3 connectors, 1 capacitor and 1 IC. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdBausatz LED-Thermometer
Dieser Bausatz beinhaltet ein LED-Thermometer mit 11 LEDs, die in einem Halbkreis angeordnet sind.
Der Bausatz wird auf öffentlichen Veranstaltungen durch Interessenten aufgebaut. Die Auswahl und Anordnung der verwendeten LEDs kann dabei nach eigenem Geschmack selbst festlegt werden. Dafür wird ein kleiner Steckbrett-Adapter verwendet, der statt der LEDs 11 2polige Fassungen enthält und auf dem eine spezielle Demo-Firmware läuft.
Die gesamte Elektronik wird durch einen AVR-Mikrocontroller realisiert. Außer dem Controller und den LEDs sind lediglich noch ein Kondensator von 100 nF sowie zwei Jumper für Justage und die Einstellung des Temperaturbereichs aufzulöten.
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11 |
| 2 | TEST_1P | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | J1, J2 |
| 1 | 100 nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | ATTINY24A-SSU | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | Bereich | SMD-Jumper:JP2-SMD | JP1 |
| 1 | DARC-Logo | Thermometer-Bausatz:DARC-Raute | B3 |
| 1 | Programm | SMD-Jumper:JP2-SMD | JP2 |
| 1 | RoHS-Logo | Thermometer-Bausatz:RoHS_Silk | B4 |
| 1 | UPDI | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | battery_holder | Thermometer-Bausatz:Battery_holder_2xAAA | B1 |
| 1 | ~ | Thermometer-Bausatz:bastelecke-url | B2 |
Similar boards
- 2 layers35 × 35 mm

- 2 layers51.3 × 18.3 mm

Exbike usb hw
03vmate/exercisebike-usb-interface
AVR MCU based USB interface for exercise bike
19 parts - 2 layers46.5 × 30.2 mm

- 2 layers

Power module
Bakirov-Artur/PWR_MIC_LI-ION_module
li-ion 18650 battery(foot print HB-18650-PC4), 1S PCB/PCM(XZD-YH10A-1)
33 parts - 2 layers58 × 48 mm

- 2 layers

- 2 layers61.7 × 23.4 mm

- 2 layers

Questions
How big is the Thermometer bausatz PCB?
It measures 100 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Thermometer bausatz use?
22 parts, built around the ATTINY24A-SSU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Thermometer bausatz KiCad files?
From the darc-s09/thermometer-bausatz repository on GitHub, at the commit this page was made from: the board is hardware/thermometer-bausatz.kicad_pcb and its schematic hardware/thermometer-bausatz.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Thermometer bausatz design in my own project?
Its repository states no licence, so its author keeps all rights: ask darc-s09 before reusing the design.