2 layers35 × 35 mm
2 layers61.7 × 23.4 mm
Imager
JSkrat/imager_la- Size
- 61.7 × 23.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 28
- Pads
- 103
- Tracks, vias
- 224, 31
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 21 Feb 2024
- Updated
- 12 Jul 2024
Overview
Imager is an open-source printed circuit board by JSkrat, from the JSkrat/imager_la repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 61.7 × 23.4 mm with 31 parts on 28 nets, routed with 224 tracks and 31 vias.
It is built around the ATTINY24A-SSU and WS2812B. Its parts include 8 diodes, 4 connectors, 3 capacitors, 2 ICs and 1 resistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdimager_la
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitors_SMD:C_0805_HandSoldering | C_LED1, C_LED2, C_LED3, C_LED4, C_LED5, C_LED6, C_LED7, C_LED8, C_MC1, C1, C2 |
| 8 | WS2812B | misc:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | 22p | Capacitors_SMD:C_0805_HandSoldering | C4, C5 |
| 1 | 10u | Capacitors_SMD:C_1206_HandSoldering | C3 |
| 1 | 16MHz | Crystals:Crystal_HC18-U_Vertical | Y1 |
| 1 | 500 | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 6D_BMI160 | modules:6D_BMI160 | U1 |
| 1 | ATtiny24A-SSU | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | AVR-ISP-6 | misc:AVR_ISP_TH_6 | J1 |
| 1 | Conn_01x03_Female | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J2 |
| 1 | LOGO | hw:RD keeper | G*** |
| 1 | acc | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J3 |
| 1 | charge | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J4 |
Similar boards
- 2 layers51.3 × 18.3 mm
Exbike usb hw
03vmate/exercisebike-usb-interface
AVR MCU based USB interface for exercise bike
19 parts - 2 layers46.5 × 30.2 mm
- 2 layers
Power module
Bakirov-Artur/PWR_MIC_LI-ION_module
li-ion 18650 battery(foot print HB-18650-PC4), 1S PCB/PCM(XZD-YH10A-1)
33 parts - 2 layers100 × 50 mm
- 2 layers58 × 48 mm
- 2 layers
- 2 layers
Questions
How big is the Imager PCB?
It measures 61.7 × 23.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Imager use?
31 parts, built around the ATTINY24A-SSU and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Imager KiCad files?
From the JSkrat/imager_la repository on GitHub, at the commit this page was made from: the board is hw/imager/imager.kicad_pcb and its schematic hw/imager/imager.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Imager design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).