2 layers35 × 183 mm
Right side
google/flight-lab
Flight Lab is a project to build high fidelity flight simulation experience.
50 parts15Apache-2.0
2 layers33 × 184 mm
Left side autopilot
google/flight-lab15Flight Lab is a project to build high fidelity flight simulation experience.
- Size
- 33 × 184 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 56
- Pads
- 205
- Tracks, vias
- 659, 140
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Sep 2018
- Updated
- 23 Jul 2024
Overview
Left side autopilot is an open-source printed circuit board by google, from the google/flight-lab repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 33 × 184 mm with 54 parts on 56 nets, routed with 659 tracks and 140 vias.
Its parts include 31 diodes, 13 switches, 5 connectors and 2 ICs.
README
README.mdFlight Lab
Flight Lab is a project to build high fidelity flight simulation experience.
Disclaimer: This is not an officially supported Google product.
Flight Lab Repository
This repository contains complete spec, design, model, source code of software and firmware to build a flight simulation system.
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | D | custom:Diode_SMD | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +15 |
| 13 | SW_PUSH_2 | custom:SW_PUSH | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13 |
| 3 | Val** | custom:SCREW | Ref**, Ref**, Ref** |
| 1 | ALT | custom:ELMA_conn | P4 |
| 1 | CONN_02X10 | custom:CNC-3020-20 | P1 |
| 1 | DUAL_NAV | custom:ELMA_conn | P3 |
| 1 | Feather_M0 | custom:Feather_M0_SMD | U1 |
| 1 | HEADING | custom:ENC_conn | P6 |
| 1 | NAV_VOL | custom:ENC_conn | P5 |
| 1 | OR_Gate_2c_2p | custom:NC7WZ32K8X | U2 |
Questions
How big is the Left side autopilot PCB?
It measures 33 × 184 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Left side autopilot use?
54 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Left side autopilot KiCad files?
From the google/flight-lab repository on GitHub, at the commit this page was made from: the board is avionics/g1000/electronics/left_side_autopilot/left_side_autopilot.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Left side autopilot design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from google/flight-lab
3
Similar boards
- 2 layers203 × 26.6 mm
- 2 layers30 × 50 mm
- 2 layers100.1 × 40 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
54 parts766 - 2 layers100 × 120 mm
- 2 layers
- 2 layers104.3 × 38.9 mm
- 2 layers
- 2 layers93.8 × 64.2 mm
PiFinder smt
brickbots/PiFinder
A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera
54 parts257GPL-3.0