2 layers33 × 184 mm
Left side autopilot
google/flight-lab
Flight Lab is a project to build high fidelity flight simulation experience.
54 parts15Apache-2.0
2 layers33 × 184 mm
Left side
google/flight-lab15Flight Lab is a project to build high fidelity flight simulation experience.
- Size
- 33 × 184 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 39
- Pads
- 123
- Tracks, vias
- 392, 105
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Sep 2018
- Updated
- 23 Jul 2024
Overview
Left side is an open-source printed circuit board by google, from the google/flight-lab repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 33 × 184 mm with 27 parts on 39 nets, routed with 392 tracks and 105 vias.
Its parts include 17 diodes, 5 connectors, 1 IC and 1 switch.
README
README.mdFlight Lab
Flight Lab is a project to build high fidelity flight simulation experience.
Disclaimer: This is not an officially supported Google product.
Flight Lab Repository
This repository contains complete spec, design, model, source code of software and firmware to build a flight simulation system.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | custom:Diode_SMD | D2, D3, D4, D5, D6, D7, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18 | |
| 3 | Val** | custom:SCREW | Ref**, Ref**, Ref** |
| 1 | ALT | custom:ELMA_conn | P4 |
| 1 | CONN_02X10 | custom:CNC-3020-20 | P1 |
| 1 | D | custom:Diode_SMD | D1 |
| 1 | DUAL_NAV | custom:ELMA_conn | P3 |
| 1 | Feather_M0 | custom:Feather_M0 | U1 |
| 1 | HEADING | custom:ENC_conn | P6 |
| 1 | NAV_TOGGLE | custom:SW_PUSH_GND | SW1 |
| 1 | NAV_VOL | custom:ENC_conn | P5 |
Questions
How big is the Left side PCB?
It measures 33 × 184 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Left side use?
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Left side KiCad files?
From the google/flight-lab repository on GitHub, at the commit this page was made from: the board is avionics/g1000/electronics/left_side/left_side.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Left side design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from google/flight-lab
3- 2 layers35 × 183 mm
Right side
google/flight-lab
Flight Lab is a project to build high fidelity flight simulation experience.
50 parts15Apache-2.0 - 2 layers215 × 15 mm
Bottom
google/flight-lab
Flight Lab is a project to build high fidelity flight simulation experience.
26 parts15Apache-2.0
Similar boards
- 2 layers47.6 × 27.3 mm
- 2 layers77.4 × 77.4 mm
CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm
- 2 layers40 × 40 mm
- 2 layers22 × 42 mm
Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm
PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT - 2 layers186 × 45 mm
AddOnD
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
27 parts226CC-BY-SA-4.0 - 2 layers29.6 × 40.6 mm
Dbwifi revB
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
27 parts223