2 layers124 × 67 mm
2 layers52 × 52 mm
Shinything
goktugh/robotbitsSome bits for robots or other control applications
- Size
- 52 × 52 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 53
- Pads
- 156
- Tracks, vias
- 317, 49
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20200628)
- Created
- 18 Mar 2022
- Updated
- 25 Feb 2022
Overview
Shinything is an open-source printed circuit board by goktugh, from the goktugh/robotbits repository on GitHub. It is a 2-layer board of 52 × 52 mm with 65 parts on 53 nets, routed with 317 tracks and 49 vias.
It is built around the MT3608. Its parts include 27 diodes, 19 resistors, 8 capacitors, 3 ICs and 1 connector.
Main components
1Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | LED | LED_SMD:LED_1206_3216Metric_Castellated | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +10 |
| 13 | 330R | Resistor_SMD:R_0805_2012Metric | R5, R6, R7, R8, R9, R10, R11, R12, R14, R15, R16, R17, R18 |
| 4 | 10uF | Capacitor_SMD:C_1206_3216Metric | C2, C3, C7, C8 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 3 | 33k | Resistor_SMD:R_0805_2012Metric | R4, R13, R19 |
| 2 | 0.1nF | Capacitor_SMD:C_1206_3216Metric | C5, C6 |
| 2 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C1, C4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R3 |
| 1 | 1.2k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 10uH | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L1 |
| 1 | 4017 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Centre Hole | MountingHole:MountingHole_2.5mm | H5 |
| 1 | D_Schottky | Diode_SMD:D_SMA_Handsoldering | D30 |
| 1 | LM556 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | Power In | Connector_Wire:SolderWire-1sqmm_1x02_P5.4mm_D1.4mm_OD2.7mm | J1 |
| 1 | SW_SPDT | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | SW1 |
More from goktugh/robotbits
12- 2 layers124 × 67 mm
- 4 layers83.5 × 61 mm
- 4 layers82 × 56.5 mm
- 4 layers82 × 61 mm
- 2 layers110 × 48 mm
- 4 layers32 × 58 mm
- 2 layers77 × 39 mm
- 2 layers41 × 39 mm
- 4 layers19 × 32 mm
- 2 layers43.5 × 15 mm
- 2 layers49.6 × 41.3 mm
Similar boards
- 2 layers92.8 × 71.8 mm
USBSID Pico v1.3f
LouDnl/USBSID-Pico
USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller
116 parts125GPL-2.0 - 2 layers100 × 85 mm
- 2 layers308.7 × 241.8 mm
OTTOtact
cester-ino/OTTO-hardware
those specs refer to the tactile buttons version, but a led backlight button version is in the works too.
229 parts49GPL-3.0 - 2 layers89.6 × 79 mm
TDR 5351 core
MR-DOS/TDR_diploma_thesis
Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.
199 parts33GPL-3.0 - 2 layers79.2 × 68.8 mm
Environment slave
pcbcupid/Lora-Wireless-Sensor-Network
A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!
72 parts30MIT - 4 layers83 × 83 mm
PWNSAT
Pwnsat/PWNCUBE
PWNCUBE v1.0 is a Cubesat hardware based platform for aerospace cybersecurity research
139 parts29 - 4 layers142.3 × 105.7 mm
Qmtech minimig
ranzbak/qmtech_minimig
KiCad design for a minimig compatible board for the QM_XC7A100T_DDR3 board.
222 parts24 - 2 layers80 × 36 mm
Freepdk
pacmancoder/easy-pdk-mini
Padauk MCU programmer variant for hand soldering.
60 parts21CC-BY-SA-4.0
Questions
How big is the Shinything PCB?
It measures 52 × 52 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Shinything use?
65 parts, built around the MT3608. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shinything KiCad files?
From the goktugh/robotbits repository on GitHub, at the commit this page was made from: the board is shinything/shinything.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shinything design in my own project?
Its repository states no licence, so its author keeps all rights: ask goktugh before reusing the design.