

Beetleback cg2
Some bits for robots or other control applications
- Size
- 35 × 35.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 24
- Pads
- 117
- Tracks, vias
- 266, 45
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210722)
- Created
- 18 Mar 2022
- Updated
- 25 Feb 2022
Overview
Beetleback cg2 is an open-source printed circuit board by goktugh, from the goktugh/robotbits repository on GitHub. It is a 4-layer board of 35 × 35.5 mm with 33 parts on 24 nets, routed with 266 tracks and 45 vias.
It is built around the ATTINY13A-SSU, HT7550-2 and HT75C0-3, with the B5819W and IRF8313PBF among its other parts. Its parts include 9 capacitors, 6 resistors, 5 ICs, 4 connectors and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5ATTINY13A-SSU
SOIC-8-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)HT7550-2
SOT-89-3-40℃~+85℃@(Ta) 1 150mA 2.5uA 25mV@(1mA) 30V 5V Fixed Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHOLTEKVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsHT75C0-3
SOT-89-3-40℃~+85℃@(Ta) 1 12V 150mA 1uA 25mV@(1mA) 30V Fixed Positive Short Circuit Protection SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHOLTEKVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsB5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky DiodesIRF8313PBF
SO-8-55℃~+175℃ 15.5mΩ@10V 2 N-Channel 2.35V 2W 30V 6nC 760pF 87pF 9.7A SO-8 MOSFETs ROHSInfineon TechnologiesMOSFETs
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1uF 25v | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C8, C9 |
| 4 | 10R | Resistor_SMD:R_0402_1005Metric | R2, R3, R5, R6 |
| 3 | 22uF 25v | Capacitor_SMD:C_1206_3216Metric | C5, C6, C7 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R4 |
| 2 | ADP3110A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U4 |
| 2 | B5819W | Diode_SMD:D_SOD-123 | D1, D3 |
| 2 | IRF8313PBF | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q2 |
| 1 | ATtiny13A-SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | HT7550-2 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | HT75C0-3 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | Red LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | motor_pad_1 | beetleback:bbb_motorpin | J3 |
| 1 | motor_pad_2 | beetleback:bbb_motorpin | J4 |
| 1 | powerin | beetleback:beetlepower_in | J2 |
| 1 | signalin | beetleback:rx_pins | J1 |
The 29 most common of 33 parts.
More from goktugh/robotbits
12- 2 layers124 × 67 mm

- 2 layers124 × 67 mm

- 4 layers83.5 × 61 mm

- 4 layers82 × 56.5 mm

- 4 layers82 × 61 mm

- 2 layers110 × 48 mm

- 4 layers32 × 58 mm

- 2 layers52 × 52 mm

- 2 layers77 × 39 mm

- 2 layers41 × 39 mm

- 4 layers19 × 32 mm

- 2 layers43.5 × 15 mm

Similar boards
- 2 layers80 × 35 mm

VORON V2.0-Expander
thebrakshow/VORON-V2.0-Expander
Expansion PCB to add 3 additional stepper drivers and 2 external PWM fans to a standard RAMPS 1.4 shield
37 parts6 - 2 layers33 × 30 mm

Mora villogo
kissadamfkut/mora_blinker
Simple LED blinker with ATtiny13A for educational purposes
21 parts34MIT - 2 layers200 × 100 mm

Keyboard
dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
225 parts14Apache-2.0 - 2 layers

TX5823
ep092/TX5823
FPV Sender mit Kanalwahl und konfiguration über SPI. Integriertes OSD mit MAX7456 und Spannungswandlern für 5V, 3,3V und 12V über einen Eingangsspannungsbereich von 8V bis 25.2V.
94 parts9 - 2 layers10.2 × 22.3 mm

- 2 layers27.9 × 66.2 mm

- 2 layers

- 2 layers50 × 50 mm

Questions
How big is the Beetleback cg2 PCB?
It measures 35 × 35.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Beetleback cg2 use?
33 parts, built around the ATTINY13A-SSU, HT7550-2, HT75C0-3 and B5819W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Beetleback cg2 KiCad files?
From the goktugh/robotbits repository on GitHub, at the commit this page was made from: the board is beetleback_cg2/beetleback_cg2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Beetleback cg2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask goktugh before reusing the design.