Skip to the content
2 layers121 × 84.5 mmOctaver, the printed circuit board in 3D

daisy seed effect firmware

Size
121 × 84.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
57
Nets
67
Pads
219
Tracks, vias
443, 101
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
31 Oct 2025
Updated
22 Oct 2026

Overview

Octaver is an open-source printed circuit board by glittershark, from the glittershark/jazz repository on GitHub. It is a 2-layer board of 121 × 84.5 mm with 57 parts on 67 nets, routed with 443 tracks and 101 vias.

It is built around the AD633JNZ, TL072 and LM311. Its parts include 19 resistors, 10 capacitors, 7 connectors, 6 ICs and 5 switches.

Main components

3

Parts

57
QtyValueFootprintReferences
4100kResistor_SMD:R_0402_1005MetricR6, R7, R11, R17
41MResistor_SMD:R_0402_1005MetricR1, R2, R16, R20
310kResistor_SMD:R_0402_1005MetricR4, R9, R10
3MouseBitecustom:MouseBite_2.54x7.62mm_JLCPCBB1, B2, B3
3TL072Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1, U2, U3
212kResistor_SMD:R_0402_1005MetricR3, R13
21kResistor_SMD:R_0402_1005MetricR8, R12
2220uCapacitor_SMD:CP_Elec_8x10.5C3, C4
2470nCapacitor_SMD:C_0603_1608MetricC2, C5
11.5kResistor_SMD:R_0402_1005MetricR15
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR14
110pCapacitor_SMD:C_0603_1608MetricC11
110uCapacitor_SMD:C_0603_1608MetricC9
11uCapacitor_SMD:C_0603_1608MetricC1
12.2kResistor_SMD:R_0402_1005MetricR5
122nCapacitor_SMD:C_0603_1608MetricC8
12kResistor_SMD:R_0402_1005MetricR19
13.3nCapacitor_SMD:C_0603_1608MetricC7
14.7nCapacitor_SMD:C_0603_1608MetricC6
140175Package_SO:SOIC-16W_5.3x10.2mm_P1.27mmU6
1A20Kcustom:Taiss_Potentiometer_verticalRV7
1A250Kcustom:Taiss_Potentiometer_verticalRV6
1A250kcustom:Taiss_Potentiometer_verticalRV2
1AD633JNZPackage_DIP:DIP-8_W7.62mmU7
1B500Kcustom:Taiss_Potentiometer_verticalRV3
1C100Kcustom:Taiss_Potentiometer_verticalRV5
1C1Mcustom:Taiss_Potentiometer_verticalRV8
1Differentiator Oncustom:Adam Tech SW-T3-2B-A-A3-S1SW3
1Footswitchcustom:PBS-24-302_3PDTSW6
1Incustom:mono_jackJ1
1Integrator Oncustom:Adam Tech SW-T3-2B-A-A3-S1SW1
1LM311Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU5
1Octave Lo/Hicustom:Adam Tech SW-T3-2B-A-A3-S1SW4
1OnLED_THT:LED_D5.0mmD1
1Outcustom:mono_jackJ2
1PowerConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3
1fs boardConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ9
1main boardConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ8
1pot_hpConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ4
1stable / alivecustom:Adam Tech SW-T3-2B-A-A3-S1SW2
1sw_hpConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ5

More from glittershark/jazz

1
  • 2 layers198.1 × 139.7 mmDevboard, the printed circuit board in 3D

    Devboard

    glittershark/jazz

    daisy seed effect firmware

    150 parts

Similar boards

  • 2 layers58 × 110 mmVco core, the printed circuit board in 3D

    Vco core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    146 parts222
  • 2 layers215 × 100 mmCore, the printed circuit board in 3D

    Core

    shmoergh/hog

    Fully analog two-voice monophonic synth for live performances

    370 parts124
  • 4 layers80 × 80 mmZ5524, the printed circuit board in 3D

    Z5524

    brer-rabbit/zoxnoxious

    Analog synth / software interface

    234 parts68GPL-3.0
  • 4 layers55.9 × 78.7 mmSSI2130 VCO, the printed circuit board in 3D

    SSI2130 VCO

    JordanAceto/SSI2130_VCO

    VCO core built around the SSI2130 chip

    106 parts22CC-BY-4.0
  • 4 layers133.9 × 165.1 mmMain VCO board, the printed circuit board in 3D

    Main VCO board

    JordanAceto/micro_ox

    Monosynth with analog signal path and digital controls. SSI2130 VCOs and SSI2140 VCF.

    295 parts8CC-BY-4.0
  • 2 layers147.4 × 63.2 mmGuitar down octave, the printed circuit board in 3D

    Guitar down octave

    MR-DOS/guitar_down_octave

    A octave-down effect for guitar. All analog, no microcontroller, no DSP.

    219 parts5GPL-3.0
  • 4 layers140 × 136 mmVinyl adc rev d, the printed circuit board in 3D

    Vinyl adc rev d

    MadsRudolph/vinyl-adc

    Discrete 3rd-order delta-sigma stereo audio ADC, built from op-amps and logic gates: a four-layer Raspberry Pi HAT made by PCBWay, with KiCad files, SPICE simulations and measurements

    184 parts1
  • 2 layers99 × 58.5 mmSynth2, the printed circuit board in 3D

    Synth2

    MattMcC27/Analog-Synth

    My personal Analog Voltage Controlled Oscilator, wave shapers, and output stage

    79 parts

Questions

How big is the Octaver PCB?

It measures 121 × 84.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Octaver use?

57 parts, built around the AD633JNZ, TL072 and LM311. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Octaver KiCad files?

From the glittershark/jazz repository on GitHub, at the commit this page was made from: the board is hardware/projects/octaver/octaver.kicad_pcb and its schematic hardware/projects/devboard/devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Octaver design in my own project?

Its repository states no licence, so its author keeps all rights: ask glittershark before reusing the design.