Skip to the content
2 layers45 × 25 mmUART RS485 Read only, the printed circuit board in 3D

RS485からUARTに変換するための基板

Size
45 × 25 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
16
Pads
57
Tracks, vias
74, 0
Pours
5
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
24 Jun 2024
Updated
26 Aug 2024

Overview

UART RS485 Read only is an open-source printed circuit board by Git-Narii, from the Git-Narii/UART-RS485_ConversionBoard__ReadOnly repository on GitHub. It is a 2-layer board of 45 × 25 mm with 22 parts on 16 nets, routed with 74 tracks and 0 vias.

It is built around the MAX3485ED, RS485 and MIC5504-3.3YM5. Its parts include 7 resistors, 6 diodes, 3 connectors, 2 capacitors and 2 ICs. It belongs with the interfaces and adapters boards of this library.

Main components

3

README

README.md

RS485からUARTに信号を変換するための基板

逆方向の変換は不可

双方向化Ver. と通信方向自動制御Ver.は作成中

Parts

22
QtyValueFootprintReferences
610kResistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R6
6LEDLED_SMD:LED_0603_1608MetricD1, D2, D3, D4, D5, D6
21uCapacitor_SMD:C_0603_1608MetricC1, C2
1120Resistor_SMD:R_0603_1608MetricR7
1Conn_01x02_SocketConnector_JST:JST_XA_S02B-XASK-1_1x02_P2.50mm_HorizontalJ1
1LOGONarii設計:ロゴ 2年G***
1MAX3485Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1MIC5504-3.3YM5Package_TO_SOT_SMD:SOT-23-5U1
1MountingHoleMountingHole:MountingHole_3.2mm_M3H1
1RS485Connector_JST:JST_XA_S04B-XASK-1_1x04_P2.50mm_HorizontalJ3
1UARTConnector_JST:JST_XA_S04B-XASK-1_1x04_P2.50mm_HorizontalJ2

Similar boards

  • 2 layers100 × 100 mmExplorer, the printed circuit board in 3D

    Explorer

    anyshake/explorer

    🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.

    266 parts100
  • 2 layers62 × 73.7 mmDoorBirdPico, the printed circuit board in 3D

    DoorBirdPico

    fraxinas/DoorBirdPico

    A custom Raspberry Pi Pico PCB design and code to add functionality to the DoorBird Voip entryphone.

    42 parts4
  • 4 layers54 × 100 mmOxrs black 004, the printed circuit board in 3D

    Oxrs black 004

    austinscreations/Oxrs-Black

    a custom rack controller that is based of the rack32 but includes some upgrades and major changes

    92 parts1GPL-3.0
  • 2 layers100 × 50 mmGnss, the printed circuit board in 3D

    Gnss

    bclswl0827/openstation

    An open source, cross-platform, easy-to-use satellite automatic tracking system with hardware & software solutions.

    42 parts1
  • 2 layers56.7 × 25.4 mmBatteryMonitorATTiny3224, the printed circuit board in 3D

    BatteryMonitorATTiny3224

    ieb/BatterySensor

    A Modbus RTU Battery Current and Voltage sensor board based Attiny3224, MAX485, MAX9918 chips.

    24 parts1
  • 2 layers64.9 × 64.9 mm485modue, the printed circuit board in 3D

    485modue

    latonita/kicad-various-shematics

    Various projects schematics and pcbs

    23 parts1
  • 2 layers139.9 × 85.8 mmPas hw, the printed circuit board in 3D

    Pas hw

    NGOQUOC98/ESP32_MODBUS_PCB_MASTER

    This project was in development phase - we will remove this remark after release

    198 parts1
  • 2 layers94 × 56.3 mmRemote unit, the printed circuit board in 3D

    Remote unit

    danielmcmillan/irrigation-system

    Hardware and software for irrigation control and monitoring

    63 partsMIT

Questions

How big is the UART RS485 Read only PCB?

It measures 45 × 25 mm and has 2 copper layers, 1.6 mm thick.

What parts does the UART RS485 Read only use?

22 parts, built around the MAX3485ED, RS485 and MIC5504-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the UART RS485 Read only KiCad files?

From the Git-Narii/UART-RS485_ConversionBoard__ReadOnly repository on GitHub, at the commit this page was made from: the board is UART-RS485 Read only/UART-RS485 Read only.kicad_pcb and its schematic UART-RS485 Read only/UART-RS485 Read only.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the UART RS485 Read only design in my own project?

Its repository states no licence, so its author keeps all rights: ask Git-Narii before reusing the design.