
Pcb rev1
girishji/optical-keyboard
Keyboard PCB for Gateron optical switches (KiCad project).

Keyboard PCB for Gateron optical switches (KiCad project).
8rows is an open-source printed circuit board by girishji, from the girishji/optical-keyboard repository on GitHub. It is a 2-layer board of 309.5 × 188.8 mm with 324 parts on 177 nets, routed with 3,085 tracks and 435 vias.
It is built around the RP2040, NCP114ASN330T1G and CC0402KRX5R6BB105, with the RC0402FR-0710KL, CC0603MRX5R8BB106 and TS-2030-B among its other parts. Its parts include 74 switches, 72 diodes, 23 capacitors, 14 resistors and 8 transistors. It belongs with the RP2040 boards of this library.
Keyboard PCB for Gateron optical switches (KiCad project).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 72 | LED | giri:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +56 |
| 72 | OSw | giri:Keychron_Optical_Switch_1u | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +56 |
| 72 | R_IR | giri:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | Ri1, Ri2, Ri10, Ri11, Ri12, Ri13, Ri14, Ri15, Ri16, Ri17, Ri18, Ri19, Ri20, Ri21, Ri22, Ri23 +56 |
| 18 | Rpt | giri:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | Rpt1, Rpt2, Rpt3, Rpt4, Rpt5, Rpt6, Rpt7, Rpt10, Rpt11, Rpt12, Rpt13, Rpt14, Rpt15, Rpt16, Rpt17, Rpt18 +2 |
| 17 | M1.6 | giri:SMTSO_M1.6 | Hs1, Hs2, Hs3, Hs4, Hs5, Hs6, Hs7, Hs8, Hs10, Hs11, Hs12, Hs13, Hs14, Hs15, Hs16, Hs17 +1 |
| 12 | 100nF | RP2040_Minimal:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C20 |
| 8 | 160R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | Rgr1, Rgr2, Rgr3, Rgr4, Rgr5, Rgr6, Rgr7, Rgr8 |
| 8 | M2 | giri:SMTSO_M2 | Hs18, Hs19, Hs20, Hs21, Hs22, Hs23, Hs24, Hs25 |
| 8 | Q_NMOS_DGS | RP2040_Minimal:Diodes_U_DFN1212_3_Handsolder | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 3 | 1uF | RP2040_Minimal:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C16, C19 |
| 3 | 2.2uF | RP2040_Minimal:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C18, C21 |
| 3 | 20k | RP2040_Minimal:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6 |
| 3 | 4.7k | RP2040_Minimal:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 3 | Conn_01x03 | giri:PinHeader_1x03_P2.54mm_Vertical | J2, J3, J4 |
| 2 | 10k | RP2040_Minimal:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12 |
| 2 | 10uF | RP2040_Minimal:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C17 |
| 2 | 15pF | RP2040_Minimal:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22, C23 |
| 2 | 1k | RP2040_Minimal:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14 |
| 2 | 27R | RP2040_Minimal:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R10 |
| 2 | 5.1k | RP2040_Minimal:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | SW_DIP_x01_XKB_TS_2030 | RP2040_Minimal:SW_CK_KXT3 | SW1, SW2 |
| 1 | 10uF | RP2040_Minimal:C_1206_3216Metric | C1 |
| 1 | 12.000MHz | RP2040_Minimal:Crystal_SMD_2520-4Pin_2.5x2.0mm-Handsolder | X1 |
| 1 | IS31FL3731-QF | RP2040_Minimal:QFN-28-1EP_4x4mm_P0.4mm_EP2.3x2.3mm-Handsolder | U1 |
| 1 | JLC_Order_Num | giri:JLC_Order_Num | JLC1 |
| 1 | Memory_Flash_W25Q64_XSON | RP2040_Minimal:8-USON-Handsolder | U4 |
| 1 | NCP114ASN330T1G | Package_SO:TSOP-5_1.65x3.05mm_P0.95mm | U2 |
| 1 | RP2040 | RP2040_Minimal:RP2040-QFN-56-Handsolder | U3 |
| 1 | U262-161N-4BVC11 | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |

girishji/optical-keyboard
Keyboard PCB for Gateron optical switches (KiCad project).

girishji/optical-keyboard
Keyboard PCB for Gateron optical switches (KiCad project).

girishji/optical-keyboard
Keyboard PCB for Gateron optical switches (KiCad project).


girishji/optical-keyboard
Keyboard PCB for Gateron optical switches (KiCad project).

girishji/optical-keyboard
Keyboard PCB for Gateron optical switches (KiCad project).

girishji/optical-keyboard
Keyboard PCB for Gateron optical switches (KiCad project).

girishji/optical-keyboard
Keyboard PCB for Gateron optical switches (KiCad project).

girishji/optical-keyboard
Keyboard PCB for Gateron optical switches (KiCad project).



sensors-inl/Nervous-EDA
ECAD design files, firmware source code and standalone application for the EDA sensor of the Nervous project.

sensors-inl/Nervous-ECG
ECAD design files, firmware source code and standalone application for the ECG sensor of the Nervous project.

SunnyYoshimitsu/CelestiCall
An attempt at making a somewhat modern smartphone with many functions.



It measures 309.5 × 188.8 mm and has 2 copper layers, 1.6 mm thick.
324 parts, built around the RP2040, NCP114ASN330T1G, CC0402KRX5R6BB105 and RC0402FR-0710KL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the girishji/optical-keyboard repository on GitHub, at the commit this page was made from: the board is lopro/8rows/pcb/pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask girishji before reusing the design.