Skip to the content
4 layers40 × 40 mmAuv sensor hub, the printed circuit board in 3D

STM32-based sensor hub for autonomous underwater vehicles, integrating CAN bus communication, inertial and pressure sensing, and multi-rail power regulation.

Size
40 × 40 mm
Copper layers
4
Thickness
1.6 mm
Parts
59
Nets
78
Pads
215
Tracks, vias
160, 101
Pours
7
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
28 Oct 2026
Updated
28 Oct 2026

Overview

Auv sensor hub is an open-source printed circuit board by ginomcfino, from the ginomcfino/auv-sensor-hub repository on GitHub. It is a 4-layer board of 40 × 40 mm with 59 parts on 78 nets, routed with 160 tracks and 101 vias.

It is built around the TCAN332D, LM2596S-5.0 and MS5837-30BA, with the AP2112K-3.3, BNO085 and TLV75533PDBV among its other parts. Its parts include 28 capacitors, 9 resistors, 7 ICs, 5 diodes and 1 transistor. It belongs with the sensors and measurement boards and the STM32 boards of this library.

Main components

10

README

README.md

AUV Sensor Hub

A sensor-hub design for an autonomous underwater vehicle, combining an STM32 microcontroller, CAN communication, inertial and pressure sensing, and multiple power rails.

PCB front copper and silkscreen layout

Status: CAD design study; not yet fabricated or bench-tested. ERC, DRC, and schematic-to-board checks report zero findings in KiCad 10.0.5 under the saved project rules.

This is my manually developed circuit and PCB design. Component libraries, manufacturer models, and other supplied assets retain their original attribution.

Open hardware/AUV_SENSOR_HUB.kicad_pro with KiCad 10 and its standard symbol, footprint, and 3D model libraries.

Parts

59
QtyValueFootprintReferences
13100nFCapacitor_SMD:C_0603_1608MetricC4, C5, C8, C14, C15, C16, C22, C23, C24, C25, C26, C27, C28
41uFCapacitor_SMD:C_0603_1608MetricC12, C18, C20, C21
4MountingHoleMountingHole:MountingHole_2.7mm_M2.5H1, H2, H3, H4
30.1uFCapacitor_SMD:C_0603_1608MetricC11, C17, C19
3100kResistor_SMD:R_0603_1608MetricR3, R8, R9
2100pFCapacitor_SMD:C_0603_1608MetricC1, C2
210kResistor_SMD:R_0603_1608MetricR4, R7
210uFCapacitor_SMD:C_0603_1608MetricC9, C10
210ΩResistor_SMD:R_0603_1608MetricR1, R2
24.7kResistor_SMD:R_0603_1608MetricR5, R6
247uFCapacitor_SMD:C_1206_3216MetricC3, C6
2PESD1CANDiode_SMD:D_SOD-323D2, D3
1100Ω @ 100MHzInductor_SMD:L_CommonModeChoke_Murata_DLW5BTMxxxSQ2x_5x5mmFL1
112VDiode_SMD:D_SOD-123D4
11AFuse:Fuse_1206_3216MetricF1
12.2uFCapacitor_SMD:C_0603_1608MetricC13
1220uFCapacitor_SMD:CP_Elec_8x10C7
133uHInductor_SMD:L_Wuerth_WE-PD2-Typ-LL1
1600Ω @ 100MHzInductor_SMD:L_0603_1608MetricFB1
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U2
1BNO085BNO085:IC_BNO085U5
1Conn_01x04_PinConnector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_VerticalJ1
1LM2596S-5Package_TO_SOT_SMD:TO-263-5_TabPin3U1
1MS5837-30BASensor_Pressure:TE_MS5837-xxBAU4
1SI2301CDSPackage_TO_SOT_SMD:SOT-23Q1
1SMBJ18ADiode_SMD:D_SMBD1
1SS34Diode_SMD:D_SMAD5
1STM32F072C8TxPackage_QFP:LQFP-48_7x7mm_P0.5mmU6
1TCAN332Package_SO:JEITA_SOIC-8_3.9x4.9mm_P1.27mmU7
1TLV75533PDBVPackage_TO_SOT_SMD:SOT-23-5U3

Similar boards

  • 4 layers80 × 60 mmCAN ECU, the printed circuit board in 3D

    CAN ECU

    dhruxraj/stm32-can-ecu

    A compact, "ECU-style" CAN node for learning and prototyping automotive-type embedded software. It has an STM32G4 MCU, a CAN transceiver with protection and switchable termination, a 6-axis IMU, a protected 8-18 V…

    77 parts2
  • 4 layers32.4 × 26.2 mmMTAG V2 0, the printed circuit board in 3D

    MTAG V2 0

    tyson-lin/mtag2.1

    88 parts1
  • 2 layers210 × 120 mmRelay24 ESP32, the printed circuit board in 3D

    Relay24 ESP32

    renatorgr/Boards

    Hardware and firmware for the AgOpenGPS AiO v4.5 autosteer boards: Teensy 4.1 firmware with its own web page (GPS, IMU, autosteer), a XIAO ESP32 Wi-Fi status page, XIAO adapter boards, and an Arduino Nano sprayer…

    164 parts2GPL-3.0
  • 2 layers224 × 90.4 mmTT 0.4 Control board!, the printed circuit board in 3D

    TT 0.4 Control board!

    sreedharRP/TT_0.4_Control_Unit_PCB_design

    PCB Design File of TT_0.4 AUV

    68 partsMIT
  • 5 layers62 × 52 mmTideband, the printed circuit board in 3D

    Tideband

    jayis1/hardware-design-lab

    Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

    24 parts
  • 4 layers130 × 77 mmCentral gateway, the printed circuit board in 3D

    Central gateway

    mohamed1920said/STARTUP

    KiCad 10 carrier board for the AMR central gateway firmware. The board accepts an ESP32-S3-DevKitC-1-N8R8, adds a soldered RFM95W 868 MHz radio, protected sensor interfaces, regulated 7-18 V input, an enclosure-button…

    58 parts
  • 2 layers127 × 105.5 mmBR mainBoard, the printed circuit board in 3D

    BR mainBoard

    matttt/balancebot2026

    76 parts2
  • 2 layersESP32 DEV, the printed circuit board in 3D

    ESP32 DEV

    CalSol/calsol-hw-libs

    Shared HW libraries

    45 partsBSD-3-Clause

Questions

How big is the Auv sensor hub PCB?

It measures 40 × 40 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Auv sensor hub use?

59 parts, built around the TCAN332D, LM2596S-5.0, MS5837-30BA and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Auv sensor hub KiCad files?

From the ginomcfino/auv-sensor-hub repository on GitHub, at the commit this page was made from: the board is hardware/AUV_SENSOR_HUB.kicad_pcb and its schematic hardware/AUV_SENSOR_HUB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Auv sensor hub design in my own project?

Its repository states no licence, so its author keeps all rights: ask ginomcfino before reusing the design.