gianlucarenzi/AmigaPCDriveAdapter34A simple interface for standard PC Floppy Disk Drive and Amiga Computers
AmigaPCDriveAdapter is an open-source printed circuit board by gianlucarenzi, from the gianlucarenzi/AmigaPCDriveAdapter repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99.1 × 30.5 mm with 18 parts on 29 nets, routed with 261 tracks and 2 vias.
It is built around the 74LS384N. Its parts include 8 resistors, 4 capacitors, 2 connectors, 1 IC and 1 diode.
Created by Gianluca Renzi (C) 2018 E-Mail:
It is a simple but powerful adapter to use internally in any Amiga Computer! It must be connected to the floppy disk drive 34-pin interface on the drive itself, then hooked up with the original cables from Amiga motherboard.
| Quantity | Digikey's Part No. | Manufacturer's Part. No. | Description | PCB/Schematic's Reference |
|---|---|---|---|---|
| 2 | 445-10000-1-ND | CGA5H2X8R2A104K115AD | CAP CER 0.1UF 100V 1206 EPOXY | C2, C3 |
| 10 | P2.2KECT-ND | ERJ-8GEYJ222V | RES SMD 2.2K OHM 5% 1/4W 1206 | R1, R2, R3, R4, R5, R6, R7 |
| 1 | 754-APTR3216SECK/J3-PRVCT-ND | APTR3216SECK/J3-PRV | LED SMD | D1 |
| 1 | WM4002-ND | 0022032041 | CONN HEADER VERT 4POS 2.54MM | P1 |
| 1 | 609-3407-ND | 68016-404HLF | CONN HEADER R/A 4POS 2.54MM | P2 |
| 1 | 541-CRCW1206330RJNEACCT-ND | CRCW1206330RJNEAC | RES 330 OHM 5% 1/4W 1206 | R8 |
| 1 | S9174-ND | SBH11-PBPC-D17-ST-BK | CONN HEADER VERT 34POS 2.54MM | TO_AMIGA1 |
| 1 | ED3068-ND | SH2-34G-PT | CONN RCPT 34POS 0.1 GOLD PCB | TO_FLOPPY1 |
| 1 | 296-1664-5-ND | SN74LS38N | IC GATE NAND 4CH 2-INP 14DIP | U1 |
| 2 | 478-10757-1-ND | TPSA106K016R1000 | CAP TANT 10UF 10% 16V 1206 | C1, C4 |
This entire project is available under the GNU General Public License v3 licence. See licence.txt for more details.
Additional Copyright/License Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software/Hardware.
THE SOFTWARE/HARDWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE/HARDWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE/HARDWARE.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 2.2K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R7 |
| 2 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3 |
| 2 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-12_Kemet-S | C1, C4 |
| 1 | 2,2K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | 74LS38 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | CONN_01X04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | P1 |
| 1 | CONN_01X04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | P2 |
| 1 | CONN_02X17 | Connector_PinSocket_2.54mm:PinSocket_2x17_P2.54mm_Vertical | TO_FLOPPY1 |
| 1 | CONN_02X17 | RetroBitLab:IDC-Header_2x17_P2.54mm_Vertical_Lock | TO_AMIGA1 |
| 1 | Led_Small | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
Nakazoto/CenturionComputer
This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.
andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
hanshuebner/cpc-floppy-controllers
MOVED to code.netzhansa.com/hanshuebner/cpc-floppy-controllers. This GitHub mirror is archived.
kev-ju/PC-Retro-MTM
Modern KiCad version of the IBM 5150 system board originally created by MTM Scientific, Inc.
It measures 99.1 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the 74LS384N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gianlucarenzi/AmigaPCDriveAdapter repository on GitHub, at the commit this page was made from: the board is AmigaPCDriveAdapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).