

Daisy V2 - STM32
An open source macro pad with a rotary encoder and OLED panel, this is an alternative version to the original through hole Daisy kit.
- Size
- 100 × 60 mm
- Copper layers
- 2
- Thickness
- 1.2 mm
- Parts
- 57
- Nets
- 63
- Pads
- 215
- Tracks, vias
- 370, 32
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Jun 2024
- Updated
- 13 Feb 2025
Overview
Daisy V2 - STM32 is an open-source printed circuit board by ghostseven, from the ghostseven/Draytronics-Daisy-PCB-V2 repository on GitHub. It is a 2-layer board of 100 × 60 mm with 57 parts on 63 nets, routed with 370 tracks and 32 vias.
It is built around the STM32F072CBT6, PRTR5V0U2X and SN74LV1T34DBVR-TP, with the WS2812B among its other parts. Its parts include 13 diodes, 10 capacitors, 6 resistors, 4 ICs and 1 connector. It belongs with the keyboards and input and lEDs and displays boards and the STM32 boards of this library.
Main components
4STM32F072CBT6
LQFP-48(7x7)-40℃~+85℃ 1.65V~3.6V 128KB 12bit 12bit 16KB 32 Bit 37 48MHz ARM Cortex-M0 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)SN74LV1T34DBVR-TP
SOT-23-5-40℃~+125℃ 1 1 1.6V~5.5V CMOS CMOS Power-off protection Unidirectional SOT-23-5 Translators, Level Shifters ROHSTECH PUBLICTranslators, Level ShiftersWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdDraytronics-Daisy-PCB-V2

An open source macro pad with a rotary encoder and OLED panel, this is an alternative version to the original through hole Daisy kit. More info / PCB designs available at draytronics.co.uk/daisyV2
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 8 | MX_SW_solder | PCM_marbastlib-mx:SW_MX_1u | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 |
| 7 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4, C5, C6, C7, C8 |
| 6 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R6 |
| 4 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | LED1, LED2, LED3, LED4 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | SW_SPST | Button_Switch_SMD:SW_SPST_TL3342 | BOOT1, RST1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | Encoder | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | RE1 |
| 1 | LOGO | Daisy:Warning | G*** |
| 1 | LOGO | Daisy:Daisy_Graphic_One_Fc | G*** |
| 1 | LOGO | Daisy:draytronics-daisy-logo | G*** |
| 1 | LOGO | Daisy:qmk-logo | G*** |
| 1 | OLED | Draytronics:SSD1306-0.91-OLED-4pin-128x32 | OL1 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | U2 |
| 1 | SN74LV1T34DBV | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | STM32F072CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USB_C_Receptacle_USB2.0 | PCM_marbastlib-various:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | XC6206PxxxMR-Regulator_Linear | Package_TO_SOT_SMD:SOT-23 | U3 |
The 51 most common of 57 parts.
Similar boards
- 6 layers320.8 × 128.3 mm

- 2 layers376 × 124 mm

- 4 layers79.5 × 100 mm

Klawiatura analogowa
matres24/KiCad_matnumpad
This is a numpad keyboard with Hall Effect sensors with Lekker L45 switches
101 parts1 - 4 layers405.4 × 159 mm

Heimdall
modern-hobbyist/aesir
Collection of KiCad PCB designs for custom keyboards, including full-sized and split ergonomic layouts with STM32F072CBT6 microcontrollers.
322 parts27 - 4 layers227.3 × 85 mm

Le capybara
sporkus/le_capybara_keyboard
Capactive sensing (EC) pcb for Le Chiffre keyboard
118 parts58CERN-OHL-W-2.0 - 2 layers227.3 × 84.9 mm

Stm32 hotswap chiffre
sporkus/le_chiffre_keyboard_stm32
Le Chiffre keyboard pcb with stm32F072
110 parts53CERN-OHL-W-2.0 - 2 layers20.3 × 50.8 mm

STM32F072 template
NCKiser/STM32F072_template
This is a Kicad Template project (that also happens to be a dev-board) for the STM32F072CBT6.
23 parts29CERN-OHL-P-2.0 - 2 layers209.7 × 76.3 mm

Questions
How big is the Daisy V2 - STM32 PCB?
It measures 100 × 60 mm and has 2 copper layers, 1.2 mm thick.
What parts does the Daisy V2 - STM32 use?
57 parts, built around the STM32F072CBT6, PRTR5V0U2X, SN74LV1T34DBVR-TP and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Daisy V2 - STM32 KiCad files?
From the ghostseven/Draytronics-Daisy-PCB-V2 repository on GitHub, at the commit this page was made from: the board is Daisy V2 - STM32/Daisy V2 - STM32.kicad_pcb and its schematic Daisy V2 - STM32/Daisy V2 - STM32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Daisy V2 - STM32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ghostseven before reusing the design.