

Voron2 pcb full
Breakout PCBs for Voron2.4
- Size
- 143 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 73
- Pads
- 168
- Tracks, vias
- 250, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Feb 2021
- Updated
- 18 Apr 2021
Overview
Voron2 pcb full is an open-source printed circuit board by gerritwellen, from the gerritwellen/voron2_pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 143 × 60 mm with 39 parts on 73 nets, routed with 250 tracks and 0 vias.
It is built around the BME280, BAT85 and ADXL345-EP. Its parts include 28 connectors and 1 diode.
Main components
3BME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity SensorBAT85
DO-341 Independent 200mA 2uA@25V 30V 5A 800mV@100mA DO-34 Schottky Diodes ROHSNexperiaSchottky DiodesADXL345-EP
LGA-14(3x5x0.8)LGA-14(3x5x0.8) New Arrivals ROHSAnalog DevicesUncategorised
README
README.mdvoron2_pcb
Breakout PCBs for Voron2.4
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H5, H6, H7, H8 |
| 2 | Conn_02x06_Top_Bottom | Connector_Molex:Molex_Micro-Fit_3.0_43045-1212_2x06_P3.00mm_Vertical | J5, J22 |
| 2 | Conn_02x12_Top_Bottom | Connector_Molex:Molex_Micro-Fit_3.0_43045-2412_2x12_P3.00mm_Vertical | J7, J20 |
| 2 | LOGO | Logo_footprint:logo_14mm | G***, G*** |
| 2 | a_motor | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J12, J28 |
| 2 | b_motor | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J11, J27 |
| 2 | bme280 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1, J17 |
| 2 | extruder | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4, J18 |
| 2 | hotend_fan | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J13, J25 |
| 2 | part_fan | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9, J23 |
| 2 | probe | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3, J16 |
| 2 | thermistor | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J8, J21 |
| 2 | x_limit | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J14, J26 |
| 2 | y_limit | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J10, J24 |
| 1 | BAT85 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x07 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J19 |
| 1 | adxl345 | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J6 |
More from gerritwellen/voron2_pcb
2- 2 layers50 × 60 mm

- 2 layers25 × 50 mm

Similar boards
- 2 layers97 × 77.5 mm

ESPlant
CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
77 parts37 - 2 layers52.8 × 65.3 mm

- 2 layers44 × 44 mm

- 2 layers66.9 × 28.7 mm

Airspeed board
nikitaignatov/velometa-pcb
this repo contains all pcb and schematics for velometa
10 parts1GPL-3.0 - 4 layers42 × 42 mm

- 2 layers65 × 56 mm

- 2 layers61.3 × 89.6 mm

QuakeGuard PCB
GiZano/QuakeGuard
Distributed Earthquake Early Warning (EEW) system built on low-cost ESP32-C3 IoT sensors with Zero-Trust security, multi-node epicenter triangulation, and on-premise AI emergency reports.
17 parts24AGPL-3.0 - 6 layers60 × 60 mm

High Temp Load Cell Toolhead Board
garethky/ADS1220-Klipper-Board
A board for connecting up to 4 Load cells to an ADS1220
125 parts23GPL-3.0
Questions
How big is the Voron2 pcb full PCB?
It measures 143 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Voron2 pcb full use?
39 parts, built around the BME280, BAT85 and ADXL345-EP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Voron2 pcb full KiCad files?
From the gerritwellen/voron2_pcb repository on GitHub, at the commit this page was made from: the board is Hardware/voron2_pcb_full/voron2_pcb_full.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Voron2 pcb full design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).