2 layers100 × 100 mm
2 layers82 × 72 mm
Domino CAN
GBert/misc99miscellaneous stuff / unsorted
- Size
- 82 × 72 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 116
- Pads
- 161
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 29 Aug 2013
- Updated
- 15 Jan 2026
Overview
Domino CAN is an open-source printed circuit board by GBert, from the GBert/misc repository on GitHub. It is a 2-layer board of 82 × 72 mm with 19 parts on 116 nets.
It is built around the PIC18F25K80-I/MM, FT230XS-R and HR911105A. Its parts include 5 capacitors, 5 ICs, 4 resistors and 1 connector. It belongs with the PIC boards of this library.
Main components
3
PIC18F25K80-I/MM
QFN-28-EP(6x6)-40℃~+85℃ 1.8V~5.5V 12bit 1KB 24 3.6KB 32KB 64MHz 8 Bit Built-in FLASH PIC QFN-28-EP(6x6) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
FT230XS-R
SSOP-16-150mil-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART SSOP-16-150mil USB Converters ROHSFTDIUSB Converters
HR911105A
插件0℃~+70℃ 1 Filtered Gold Non-PoE Phosphor bronze RJ45 Jack Right Angle Shielded With LED 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSHANRUNEthernet Connectors / Modular Connectors (RJ45 RJ11)
README
RPi-Rail/README.mdParts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1pin | Connect:1pin | RF1, RF2, RF3, RF4 |
| 2 | 100nF | Resistors_SMD:R_0805_HandSoldering_II | C4, C5 |
| 2 | 220 | Resistors_SMD:R_0805_HandSoldering_II | R3, R4 |
| 2 | 27 | Resistors_SMD:R_0805_HandSoldering_II | R1, R2 |
| 2 | 47pF | Resistors_SMD:R_0805_HandSoldering_II | C1, C2 |
| 2 | HR911105A | RJ45ALED_1PRIMARY | U4, U5 |
| 1 | 4.7uF | Resistors_SMD:R_0805_HandSoldering_II | C6 |
| 1 | DOMINO_CORE | Domino:DOMINO | U1 |
| 1 | FT230XS | w_smd_dil:ssop-16 | U3 |
| 1 | PIC18F25K80 | w_smd_dil:soic-28 | U2 |
| 1 | UART | Pin_Headers:Pin_Header_Straight_1x03 | P1 |
Questions
How big is the Domino CAN PCB?
It measures 82 × 72 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Domino CAN use?
19 parts, built around the PIC18F25K80-I/MM, FT230XS-R and HR911105A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Domino CAN KiCad files?
From the GBert/misc repository on GitHub, at the commit this page was made from: the board is srse/Domino-CAN/Domino-CAN.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Domino CAN design in my own project?
Its repository states no licence, so its author keeps all rights: ask GBert before reusing the design.
More from GBert/misc
12- 2 layers100 × 100 mm
- 2 layers85 × 56.5 mm
- 2 layers100 × 100 mm
- 2 layers82 × 72 mm
- 2 layers50 × 50 mm
- 2 layers68.6 × 53.3 mm
- 2 layers50 × 50 mm
- 2 layers65 × 56.5 mm
- 2 layers65 × 56 mm
- 2 layers65 × 56.5 mm
- 2 layers45 × 50 mm
Similar boards
- 2 layers24 × 27.9 mm
- 2 layers62 × 38.1 mm
Water meter counter
usimd/water-meter-counter
Inductive water meter counting module for B-meters GSD8
46 parts1 - 2 layers55 × 45 mm
Canfuel
PoJD/kicad
Printed circuit boards. A container for all projects, successor to the older eagle repo.
28 partsApache-2.0 - 2 layers79 × 38 mm
Ethersweep
Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.
111 parts587 - 4 layers96 × 100 mm
OtterCastAmp
Ottercast/OtterCastAmp
OtterCastAmp is an open-source WiFi Speaker amplifier, based on a Sochip S3 SoC. Powered by any USB PD adapter for up to 100W of music.
272 parts341MIT - 4 layers72.6 × 170 mm
OpenJBOD RP2040
OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.
129 parts87CERN-OHL-P-2.0 - 2 layers71.2 × 38.1 mm
- 2 layers40 × 68 mm
MULTIGW
nuclearcat/ESP32ETH
Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible
32 parts30LGPL-2.1