Skip to the content
2 layers117.3 × 43.4 mmGMsbc01-CPU, the printed circuit board in 3D

A retro computer system based on the 65C02 CPU in a modular form.

Size
117.3 × 43.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
56
Pads
124
Tracks, vias
244, 0
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20170123)
Created
22 Sep 2017
Updated
12 May 2026

Overview

GMsbc01-CPU is an open-source printed circuit board by GaryMacMinn, from the GaryMacMinn/65C02-Retro-Computer repository on GitHub, published under the MIT licence. It is a 2-layer board of 117.3 × 43.4 mm with 19 parts on 56 nets, routed with 244 tracks and 0 vias.

It is built around the 74HCT393D. Its parts include 4 resistors, 2 capacitors, 2 ICs, 1 diode and 1 connector. It belongs with the retro computing and games boards of this library.

Main components

1

README

README.md

65C02-Retro-Computer

A retro computer system based on the 65C02 CPU in a modular format.

This is my first version of a retro 65C02 based comnputer. My original design for this project was around a single board containing all of the parts (a single board computer!!). After a bit of an initial draw up, I realised that there were a lot of unknown details to the design and if I needed to change anything it would mean producing an entire new PCB. After a little thought I decided to do a backplane design that allows sections and functionality to be plugged in as required. If I wanted to remove or change any sections I could just redo that plug in card rather that everything.

The system at present consists of:

  • Backplane Board
  • Power Supply and Reset Card
  • CPU Card
  • Memory Card (Combined Flash Memory and SRAM)
  • Serial Card
  • Parallel Card

The files included in the Schematic & PCB directory are the KiCAD schematic and PCB files as they stand at the moment. These cards have been finalised, produced and tested. The others will be added as I build and verify their designs.

Parts

19
QtyValueFootprintReferences
4MountingHole_3.2mm_M3Mounting_Holes:MountingHole_3.2mm_M31, 2, 3, 4
33k3Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3
20.1uFCapacitors_THT:C_Disc_D3.0mm_W2.0mm_P2.50mmC1, C2
116MHzOscillators:Oscillator_DIP-14X1
11MHzPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJP4
12MHzPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJP3
1330RResistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4
14MHzPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJP2
174HCT393Housings_DIP:DIP-14_W7.62mm_LongPadsU2
18MHzPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJP1
1CONN_01X40Pin_Headers:Pin_Header_Angled_1x40_Pitch2.54mmJ1
1PowerLEDs:LED-3MMLED1
1WD65C02Housings_DIP:DIP-40_W15.24mm_LongPadsU1

More from GaryMacMinn/65C02-Retro-Computer

2
  • 2 layers117.3 × 43.4 mmGMsbc01-Power&Reset, the printed circuit board in 3D

    GMsbc01-Power&Reset

    GaryMacMinn/65C02-Retro-Computer

    A retro computer system based on the 65C02 CPU in a modular form.

    20 partsMIT
  • 2 layers72.9 × 117.3 mmGMsbc01-Backplane, the printed circuit board in 3D

    GMsbc01-Backplane

    GaryMacMinn/65C02-Retro-Computer

    A retro computer system based on the 65C02 CPU in a modular form.

    11 partsMIT

Similar boards

  • 2 layers99.1 × 49.9 mmZ80-cpu, the printed circuit board in 3D

    Z80-cpu

    ChartreuseK/RC2014-Z80-CLK-RES

    Simple z80 board with onboard clock generator and reset circuitry for RC2014 bus.

    26 partsGPL-3.0
  • 4 layers120.2 × 104.1 mmExtrom, the printed circuit board in 3D

    Extrom

    jimbro1000/DragonPalExtRom

    Dragon Pal with External Character Rom for Rev 3.1

    78 partsMIT
  • 4 layers161.3 × 101.9 mmSBC6809System2Video, the printed circuit board in 3D

    SBC6809System2Video

    jimbro1000/SBC6809System2Video

    This started out as a reimplementation of the Acorn system 2 teletext card. That design quickly went in the bin in favour or something closer to the video implementation of the BBC Model A/B or Amstrad CPC464.

    82 parts
  • 2 layers43.9 × 27.7 mmTcd1304-4v, the printed circuit board in 3D

    Tcd1304-4v

    OpnTec/open-spectrometer-hardware

    Open source VIS spectrometer

    19 parts1.5k
  • 2 layers50 × 60 mmDebate Device, the printed circuit board in 3D

    Debate Device

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    19 parts915
  • 2 layers102.9 × 96.7 mmISA adapter, the printed circuit board in 3D

    ISA adapter

    polpo/picogus

    Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

    19 parts805
  • 2 layers60 × 39 mmPs2usb, the printed circuit board in 3D

    Ps2usb

    rasteri/HIDman

    Adapting USB devices to work on old computers

    19 parts432
  • 2 layers70.1 × 43.2 mmIaq device, the printed circuit board in 3D

    Iaq device

    nkitanov/iaq_board

    IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

    19 parts396

Questions

How big is the GMsbc01-CPU PCB?

It measures 117.3 × 43.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the GMsbc01-CPU use?

19 parts, built around the 74HCT393D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the GMsbc01-CPU KiCad files?

From the GaryMacMinn/65C02-Retro-Computer repository on GitHub, at the commit this page was made from: the board is Schematic&PCB/GMsbc01-CPU.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the GMsbc01-CPU design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).