Skip to the content
2 layers117.3 × 43.4 mmGMsbc01-Power&Reset, the printed circuit board in 3D

A retro computer system based on the 65C02 CPU in a modular form.

Size
117.3 × 43.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
44
Pads
85
Tracks, vias
66, 0
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20170123)
Created
22 Sep 2017
Updated
12 May 2026

Overview

GMsbc01-Power&Reset is an open-source printed circuit board by GaryMacMinn, from the GaryMacMinn/65C02-Retro-Computer repository on GitHub, published under the MIT licence. It is a 2-layer board of 117.3 × 43.4 mm with 20 parts on 44 nets, routed with 66 tracks and 0 vias.

It is built around the L7805 and TL7705AID. Its parts include 5 capacitors, 4 connectors, 2 resistors, 2 ICs and 1 diode. It belongs with the retro computing and games boards of this library.

Main components

2

README

README.md

65C02-Retro-Computer

A retro computer system based on the 65C02 CPU in a modular format.

This is my first version of a retro 65C02 based comnputer. My original design for this project was around a single board containing all of the parts (a single board computer!!). After a bit of an initial draw up, I realised that there were a lot of unknown details to the design and if I needed to change anything it would mean producing an entire new PCB. After a little thought I decided to do a backplane design that allows sections and functionality to be plugged in as required. If I wanted to remove or change any sections I could just redo that plug in card rather that everything.

The system at present consists of:

  • Backplane Board
  • Power Supply and Reset Card
  • CPU Card
  • Memory Card (Combined Flash Memory and SRAM)
  • Serial Card
  • Parallel Card

The files included in the Schematic & PCB directory are the KiCAD schematic and PCB files as they stand at the moment. These cards have been finalised, produced and tested. The others will be added as I build and verify their designs.

Parts

20
QtyValueFootprintReferences
4MountingHole_3.2mm_M3Mounting_Holes:MountingHole_3.2mm_M31, 2, 3, 4
20.1uFCapacitors_THT:C_Disc_D3.0mm_W2.0mm_P2.50mmC3, C5
1+5v Reg BypassPin_Headers:Pin_Header_Angled_1x02_Pitch2.54mmJP1
11000uF 25vCapacitors_THT:CP_Radial_D10.0mm_P5.00mmC1
1100uF 16vCapacitors_THT:CP_Radial_D5.0mm_P2.50mmC4
110kResistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
1330RResistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1470uF 16vCapacitors_THT:CP_Radial_D8.0mm_P3.80mmC2
1Ext ResetPin_Headers:Pin_Header_Angled_1x02_Pitch2.54mmJ4
1L7805TO_SOT_Packages_THT:TO-220_Neutral123_Horizontal_LargePadsU1
1PowerLEDs:LED-3MMLED1
1Power InPin_Headers:Pin_Header_Angled_1x02_Pitch2.54mmJ3
1Power InConnectors:JACK_ALIMJ2
1ResetButtons_Switches_THT:SW_PUSH_6mmSW1
1Slot 1Pin_Headers:Pin_Header_Angled_1x40_Pitch2.54mmJ1
1TL7705AHousings_DIP:DIP-8_W7.62mm_LongPadsU2

More from GaryMacMinn/65C02-Retro-Computer

2
  • 2 layers117.3 × 43.4 mmGMsbc01-CPU, the printed circuit board in 3D

    GMsbc01-CPU

    GaryMacMinn/65C02-Retro-Computer

    A retro computer system based on the 65C02 CPU in a modular form.

    19 partsMIT
  • 2 layers72.9 × 117.3 mmGMsbc01-Backplane, the printed circuit board in 3D

    GMsbc01-Backplane

    GaryMacMinn/65C02-Retro-Computer

    A retro computer system based on the 65C02 CPU in a modular form.

    11 partsMIT

Similar boards

  • 4 layers165 × 142.5 mmTestboard, the printed circuit board in 3D

    Testboard

    anthonydotmoe/68040pc

    A general purpose computer platform for retrocomputing enthusiasts

    175 parts9
  • 2 layers198.1 × 193 mmSTE25, the printed circuit board in 3D

    STE25

    stonedDiscord/Automatenplatinen

    Reverse engineerte Hardware aus deutschen Spielautomaten.

    252 parts5BSD-2-Clause
  • 2 layers180.3 × 120.6 mmMc6809, the printed circuit board in 3D

    Mc6809

    laurent-fr/LFlex21

    84 parts4
  • 2 layers99.1 × 99.1 mmFs6809sbc, the printed circuit board in 3D

    Fs6809sbc

    elekras/fs6809sbc

    A simple 6809 single board computer

    82 parts
  • 2 layers94.6 × 94.6 mmGide, the printed circuit board in 3D

    Gide

    felge1966/K1520

    Baugruppen für das K1520-System

    32 parts
  • 2 layersCombined, the printed circuit board in 3D

    Combined

    rjw57/buri

    This repository contains my work on designing, building and programming a 6502 microcomputer from scratch. The 6502 was the CPU used in the original Apple 1, BBC Microcomputer, NES console and many other systems from…

    27 parts68MIT
  • 2 layers145 × 85 mmCPU6502, the printed circuit board in 3D

    CPU6502

    Creep69/NKC

    Neuauflage des NDR KLEIN COMPUTER

    99 parts8
  • 2 layers40.6 × 110 mmEuropi surface mount, the printed circuit board in 3D

    Europi surface mount

    Allen-Synthesis/EuroPi

    EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

    92 parts584CC0-1.0

Questions

How big is the GMsbc01-Power&Reset PCB?

It measures 117.3 × 43.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the GMsbc01-Power&Reset use?

20 parts, built around the L7805 and TL7705AID. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the GMsbc01-Power&Reset KiCad files?

From the GaryMacMinn/65C02-Retro-Computer repository on GitHub, at the commit this page was made from: the board is Schematic&PCB/GMsbc01-Power&Reset.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the GMsbc01-Power&Reset design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).