
Energy meter arduino
garvit07122005-art/electronics-projects
This repository contains multiple Arduino-based projects:

This repository contains multiple Arduino-based projects:
Temperature sensor modified is an open-source printed circuit board by garvit07122005-art, from the garvit07122005-art/electronics-projects repository on GitHub. It is a 2-layer board of 74.5 × 77 mm with 9 parts on 37 nets, routed with 81 tracks and 0 vias.
It is built around the ARDUINO UNO R3. Its parts include 2 resistors, 2 diodes, 1 IC and 1 switch. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
This repository contains multiple Arduino-based projects:
Designed and developed a smart energy meter using Arduino to measure voltage, current, and power consumption. Interfaced sensors for real-time monitoring and displayed output on Serial Monitor. Designed PCB using KiCad for circuit implementation. Project currently under development.
Developed a DC voltmeter using Arduino and a voltage divider circuit to measure input voltage. Converted analog signals into digital values using ADC. Displayed output on LCD/Serial Monitor. Achieved stable and accurate readings.
Built a temperature monitoring system using LM35 sensor and Arduino. Measured real-time temperature and displayed it on LCD/Serial Monitor. Implemented analog signal processing for accurate readings. System responds effectively to temperature variations.
Modified the previous temperature system bt adding some components , added relay module for automatic switching when the real time temperature hits above the threshold temperature set by the potentiometer . added a external fan to make the temp of the surrounding cool and also added the hystresis control to avoid the flickering of switching neear around the threshold temparature
Designed a metal detector using a coil-based sensing mechanism and Arduino. Detected changes in magnetic field caused by nearby metal objects. Triggered a buzzer as an alert on detection. Demonstrated basic electromagnetic sensing principles.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | LM35-LP | Package_TO_SOT_THT:TO-92_Inline | U1 |
| 1 | Motor_DC | Motors:Vybronics_VZ30C1T8219732L | M1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3266W_Vertical | RV1 |
| 1 | SANYOU_SRD_Form_C | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |

garvit07122005-art/electronics-projects
This repository contains multiple Arduino-based projects:

garvit07122005-art/electronics-projects
This repository contains multiple Arduino-based projects:

garvit07122005-art/electronics-projects
This repository contains multiple Arduino-based projects:

garvit07122005-art/electronics-projects
This repository contains multiple Arduino-based projects:

AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.

AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum

Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.

PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno

jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4


ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.

It measures 74.5 × 77 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the garvit07122005-art/electronics-projects repository on GitHub, at the commit this page was made from: the board is project_garvit/temerature_monitoring_system/temperature monitoring system _modified/temperature_sensor_modified.kicad_pcb and its schematic project_garvit/dc_voltmeter/dc_voltemeter_kicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask garvit07122005-art before reusing the design.