4 layers40 × 40 mm
2 layers86.9 × 51.8 mm
Automation pcb
Galvant/automation-pcbautomation PCB KiCAD files
- Size
- 86.9 × 51.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 85
- Nets
- 80
- Pads
- 374
- Tracks, vias
- 1,112, 82
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 29 Sep 2013
- Updated
- 29 Sep 2013
Overview
Automation pcb is an open-source printed circuit board by Galvant, from the Galvant/automation-pcb repository on GitHub. It is a 2-layer board of 86.9 × 51.8 mm with 85 parts on 80 nets, routed with 1,112 tracks and 82 vias.
It is built around the ATMEGA328P-AU, 24AA025E48-I/SN and PS2911-1-AX, with the SI3402-TP, TLV431ASN and W5100 among its other parts. Its parts include 35 capacitors, 20 resistors, 7 ICs, 7 diodes and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
9
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
24AA025E48-I/SN
SOIC-8-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 200 Years 2Kbit 400kHz 5ms I2C Noise suppression function、Page write protection function SOIC-8 EEPROM ROHSMicrochip TechnologyEEPROM
PS2911-1-AX
SMD-4P-55℃~+100℃ 1.1V 100% 10us 160mW 2.5kV 400% 40V 40mA 50mA 5us 6V Phototransistor SMD-4P Transistor, Photovoltaic Output Optoisolators ROHSCalifornia Eastern LaboratoriesTransistor, Photovoltaic Output Optoisolators
SI3402-TP
SOT-23-55℃~+150℃ 1 N-channel 1.4V 30V 390pF 4.34nC@4.5V 41pF 4A 55mΩ@10V SOT-23 MOSFETs ROHSMicro Commercial ComponentsMOSFETs
TLV431ASN
TSOP-5-1.5mm-40℃~+85℃@(Ta) 1.24V~16V 150nA 20mA 80uA Adjustable Parallel ±1% TSOP-5-1.5mm Voltage Reference ROHSonsemiVoltage ReferenceW5100
--40℃~+85℃ 1.2mm 1dBi 3 40mm 40mm 50Ω 83.5MHz - Antennas ROHSPulse ElecAntennas
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
DFLT15A
PowerDI12315V 16.7V 225W 24.4V 9.22A Power-DI-123 ESD and Surge Protection (TVS/ESD) ROHSDiodes IncorporatedESD And Surge Protection (TVS/ESD)
PDS1040
Power-DI-51 Independent 10A 275A 40V 510mV@10A 700uA@40V Power-DI-5 Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
Parts
85| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 0.1uF | SM0603 | C2, C6, C7, C8, C12, C13, C15, C16, C17, C18, C19, C20, C25, C33, C35, C41 +1 |
| 4 | 1uF | SM0603 | C26, C30, C31, C32 |
| 4 | LED | LED-1206 | D12, D13, D14, D15 |
| 2 | 1000pF | SM0603 | C36, C39 |
| 2 | 10K | SM0603 | R10, R11 |
| 2 | 10k | SM0603 | R12, R26 |
| 2 | 10uF/16V | SM0603 | C1, C3 |
| 2 | 12k | SM0603 | R4, R27 |
| 2 | 18pF | SM0603 | C11, C14 |
| 2 | 1uH, 250mA | SM0603 | L1, L2 |
| 2 | 2.2k | SM0603 | R15, R16 |
| 2 | 330 | SM0603 | R2, R3 |
| 2 | 49.9 | SM1206 | RP1, RP3 |
| 2 | CONN_6 | SIL-6 | P3, P4 |
| 2 | C_PACK4 | SM1206 | CP1, CP2 |
| 1 | 0.01uF | SM0603 | C5 |
| 1 | 0.22uF | SM0603 | C34 |
| 1 | 10 | SM0603 | R19 |
| 1 | 100 | SM0603 | R17 |
| 1 | 1000uF | SM1206 | C44 |
| 1 | 100uF | SM0603 | C42 |
| 1 | 127 | SM0603 | R13 |
| 1 | 12uF | SM0603 | C28 |
| 1 | 15nF | SM0603 | C43 |
| 1 | 1M | SM0603 | R9 |
| 1 | 1N4148W | SM1206 | D7 |
| 1 | 1uH | SM0603 | L7 |
| 1 | 2.05k | SM0603 | R20 |
| 1 | 20k | SM0603 | R28 |
| 1 | 24AA025E48 | SOT23_6 | U4 |
| 1 | 25.5k | SM0603 | R14 |
| 1 | 25MHz | SM1206 | X1 |
| 1 | 3.01k | SM0603 | R25 |
| 1 | 300 | SM0603 | R1 |
| 1 | 4.99k | SM0603 | R18 |
| 1 | 470 | SM1206 | RP2 |
| 1 | 470pF | SM0603 | C40 |
| 1 | 560pF | SM0603 | C45 |
| 1 | ATMEGA328P-A | TQFP32 | IC1 |
| 1 | CONN_10 | SIL-10 | P2 |
| 1 | CONN_3X2 | SIL-6 | P1 |
| 1 | DFLT15A | SM1206 | D8 |
| 1 | I_PACK4 | SM1206 | IP1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MAGJACK | RJ45_TRANSFO | U2 |
| 1 | PDS1040 | SM1206 | D11 |
| 1 | PS2911 | SM1206 | U5 |
| 1 | SI3402 | QFN24 | U3 |
| 1 | TLV431 | SOT23 | U6 |
| 1 | TRANSFO_FA2924 | TRANSF-37x44 | T1 |
| 1 | W5100 | VQFP80 | U1 |
Questions
How big is the Automation pcb PCB?
It measures 86.9 × 51.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Automation pcb use?
85 parts, built around the ATMEGA328P-AU, 24AA025E48-I/SN, PS2911-1-AX and SI3402-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Automation pcb KiCad files?
From the Galvant/automation-pcb repository on GitHub, at the commit this page was made from: the board is automation-pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Automation pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask Galvant before reusing the design.
Similar boards
- 6 layers50 × 50 mm
Repeat hw
WojtaCZ/repeat-hw
A repository containing hardware files (KiCad project) for the REPEAT board
158 parts - 2 layers102.5 × 62 mm
Oxygen Monitoring
mosyrf/Oxygen-Monitoring-System
This was my second year project as an electrical engineering student, and it was quite difficult because it used an STM32 controller, which I was not familiar with.
121 parts - 4 layers137 × 86 mm
- 4 layers50 × 40 mm
- 14 layers205.6 × 228.6 mm
- 4 layers100 × 100 mm
DMXion 4port node
NEOgHacking/DMXion_4Port_Node
A 4 port dmx node with rdm funtionallity. Connects via ARTNET or sACN
275 parts2GPL-3.0 - 4 layers32 × 80 mm
