Skip to the content
4 layers74 × 66.8 mmEsp32s3-poc devboard, the printed circuit board in 3D

Esp32s3-poc devboard

Galacs/esp32s3-poc-devboard

ESP32-S3 based PoC board made to test step-down power supply design, 24v level shifter, crystal circuits and RF circuit

Size
74 × 66.8 mm
Copper layers
4
Thickness
1.61 mm
Parts
107
Nets
123
Pads
451
Tracks, vias
878, 304
Pours
16
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 Jul 2025
Updated
10 Dec 2025

Overview

Esp32s3-poc devboard is an open-source printed circuit board by Galacs, from the Galacs/esp32s3-poc-devboard repository on GitHub. It is a 4-layer board of 74 × 66.8 mm with 107 parts on 123 nets, routed with 878 tracks and 304 vias.

It is built around the CP2102-GMR, ESP32-S3FH4R2 and TPS5430DDAR, with the USBLC6-2SC6, AP2112K-3.3TRG1 and ULN2003ADRG among its other parts. Its parts include 28 capacitors, 28 resistors, 13 diodes, 8 ICs and 8 connectors. It belongs with the microcontroller boards and power boards and the ESP32 boards of this library.

Main components

12

README

README.md

ESP32-S3 POC/Devboard

ESP32-S3 based PoC board made to test step-down power supply design, 24v level shifter, crystal circuits and RF circuit

IC List

  • ESP32-S3Fx (main MCU)
  • CP2102 (USB to UART)
  • TPS5430 (step-down converter)
  • AP2112K & XC6206 (3v3 LDOs)
  • ULN2003A (transistor array)

Top preview

esp32s3-poc-devboard-top

Preview 3d render

esp32s3-poc-devboard-render

Parts

107
QtyValueFootprintReferences
145k1Resistor_SMD:R_0603_1608MetricR1, R4, R12, R13, R14, R19, R20, R21, R22, R23, R24, R26, R27, R28
50u1Capacitor_SMD:C_0402_1005MetricC10, C11, C16, C17, C18
510uCapacitor_SMD:C_0402_1005MetricC8, C12, C20, C22, C24
410kResistor_SMD:R_0603_1608MetricR3, R5, R7, R9
41uCapacitor_SMD:C_0402_1005MetricC9, C14, C15, C19
41uCapacitor_SMD:C_0603_1608MetricC3, C4, C21, C30
4750Resistor_SMD:R_0603_1608MetricR25, R29, R30, R31
4BZT52B3V3Diode_SMD:D_SOD-123D11, D12, D13, D14
3D_SchottkyDiode_SMD:D_SMAD3, D6, D7
3FiducialFiducial:Fiducial_1mm_Mask2mmFID1, FID2, FID3
3GREENLED_SMD:LED_0805_2012MetricD1, D2, D8
3MountingHoleMountingHole:ToolingHole_1.152mmH1, H2, H3
3MountingHole_PadMountingHole:MountingHole_2.2mm_M2_Pad_ViaH4, H5, H6
20Resistor_SMD:R_0603_1608MetricR6, R8
212pCapacitor_SMD:C_0402_1005MetricC23, C25
21p2Capacitor_SMD:C_0402_1005MetricC28, C29
220pCapacitor_SMD:C_0402_1005MetricC26, C27
22n7Inductor_SMD:L_0402_1005MetricL2, L4
2SW_PushButton_Switch_THT:SW_SPST_Omron_B3F-40xxSW1, SW2
2USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U6, U7
2USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J3, J4
2WHITELED_SMD:LED_0603_1608MetricD5, D9
1100uInductor_SMD:L_SXN_SMDRI127L1
110nCapacitor_SMD:C_0805_2012MetricC6
110nCapacitor_SMD:C_0402_1005MetricC13
110uCapacitor_SMD:C_0805_2012MetricC5
11kResistor_SMD:R_0603_1608MetricR18
124VDCTerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ1
124nInductor_SMD:L_0402_1005MetricL3
132k768Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY2
1470Resistor_SMD:R_0603_1608MetricR10
147uCapacitor_SMD:C_1206_3216MetricC7
148MCrystal:Crystal_SMD_2016-4Pin_2.0x1.6mmY1
14k7Resistor_SMD:R_0603_1608MetricR2
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U5
1CP2102-GMRPackage_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mmU9
1Conn_01x01_PinConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ2
1Conn_01x16_PinConnector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_VerticalJ7
1Conn_CoaxialConnector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_VerticalJ6
1ESP32-S3FH4R2Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mmU1
1Jumper_2_Small_OpenConnector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_VerticalJP1
1Jumper_3_Bridged12Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJP2
1LOGOLOGOG***
1MMDT5551Package_TO_SOT_SMD:SOT-363_SC-70-6Q3
1RResistor_SMD:R_0603_1608MetricR11
1REDLED_SMD:LED_0603_1608MetricD10
1SW_DIP_x04Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mmSW3
1Screw_Terminal_01x04TerminalBlock:TerminalBlock_Altech_AK300-4_P5.00mmJ8
1Screw_Terminal_01x06TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-06P_1x06_P5.00mmJ5
1TPS5430DDAPackage_SO:TI_SO-PowerPAD-8_ThermalViasU4
1ULN2003APackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU8
1XC6206P332MR-GPackage_TO_SOT_SMD:SOT-23-3U3

Similar boards

  • 4 layers70 × 50 mmMotor power poc, the printed circuit board in 3D

    Motor power poc

    Galacs/motor-power-poc

    A POC PCB to test circuit electrical protections and motor control schemes

    165 parts
  • 4 layers29 × 42 mmRollxoxo shim, the printed circuit board in 3D

    Rollxoxo shim

    Galacs/rollxoxo-shim

    Shim pcb to allow remote control of rollxio garage door via wifi or bluetooth

    72 parts
  • 4 layers67.6 × 63 mm2.4ghz rf test pcb, the printed circuit board in 3D

    2.4ghz rf test pcb

    Galacs/2.4ghz-rf-test-pcb

    2.4GHz RF test pcb

    56 parts
  • 4 layers74.5 × 70.3 mmNest mini v2-drop in pcb, the printed circuit board in 3D

    Nest mini v2-drop in pcb

    marceldale/nest-mini-v2-voice

    Open voice satellite board for the Google Nest Mini (2nd gen): local Home Assistant voice assistant with ESP32-S3 + XMOS XU316, ESPHome, Voice PE compatible. Open hardware, prototype stage.

    249 parts4CERN-OHL-S-2.0
  • 4 layers88 × 70 mmGreX Frontend, the printed circuit board in 3D

    GreX Frontend

    GReX-Telescope/FrontendModule

    RF Front End for GReX

    199 parts
  • 2 layers54.7 × 69 mmNeonPine, the printed circuit board in 3D

    NeonPine

    lukmatuska/NeonPine

    christmas desktop light with real neon lamps

    98 parts

Questions

How big is the Esp32s3-poc devboard PCB?

It measures 74 × 66.8 mm and has 4 copper layers, 1.61 mm thick.

What parts does the Esp32s3-poc devboard use?

107 parts, built around the CP2102-GMR, ESP32-S3FH4R2, TPS5430DDAR and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp32s3-poc devboard KiCad files?

From the Galacs/esp32s3-poc-devboard repository on GitHub, at the commit this page was made from: the board is esp32s3-poc-devboard.kicad_pcb and its schematic esp32s3-poc-devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp32s3-poc devboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask Galacs before reusing the design.