
Neuron
giant-axon/lu.i-neuron-pcb
Lu.i is an electronic neuron circuit mimicking and illustrating the basic dynamics of real, biological neurons. The printed circuit board (PCB) features a configurable, fully analog implementation of the leaky…

Mini drone project base on Zephyr RTOS
Minidrone is an open-source printed circuit board by g951753321, from the g951753321/minidrone repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 74.4 × 93 mm with 74 parts on 62 nets, routed with 632 tracks and 48 vias.
It is built around the LM1117MP-3.3 and SI2302. Its parts include 18 resistors, 16 capacitors, 11 connectors, 10 diodes and 4 transistors. It belongs with the robots and motor control boards and the STM32 boards of this library.
This project is a complex project that involves the firmware development, the schematic, and PCB design for a mini drone.
The firmware development is done using the Zephyr RTOS. The firmware includes the control algorithms for the drone, and the communication with the MicroBlue application.
To setup the Zephyr RTOS, follow the instructions in the Zephyr RTOS documentation.
To initial the project, clone the repository and run the following commands:
west init -m https://github.com/g951753321/minidrone.git --mr main minidrone
cd minidrone
west updateTo build the project, run the following commands:
west build -b stm32_dev_min minidrone/apps/PID_controlThe firmware is built for the stm32_dev_min board, and the application is PID_control.
The output files are located in the build/zephyr directory.
The schematic/PCB design is done using KiCad. The schematic includes the design of the motor drivers, the microcontroller, and the sensors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10 K | Resistor_SMD:R_0603_1608Metric | R7, R8, R9, R10, R11, R12, R14, R15 |
| 7 | 0.1 uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C5, C7, C9, C10, C11, C12 |
| 4 | 10 uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1, C3, C4, C6 |
| 4 | 180 | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5 |
| 4 | 1N4007 | Diode_SMD:D_SMA | D5, D6, D7, D8 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4 |
| 4 | Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad_TopBottom | H1, H2, H3, H4 |
| 4 | SI2302 | si2302_kicad:SOT23 | Q1, Q2, Q3, Q4 |
| 2 | 1 K | Resistor_SMD:R_0603_1608Metric | R13, R16 |
| 2 | 100 K | Resistor_SMD:R_0603_1608Metric | R17, R18 |
| 2 | 12 pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C16 |
| 2 | 20 pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C15 |
| 2 | 30 K | Resistor_SMD:R_0603_1608Metric | R1, R6 |
| 2 | BAT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J1, J5 |
| 2 | Conn_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J9, J10 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D9, D10 |
| 1 | 1 uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | 32,768KHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | BL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | M2 |
| 1 | BR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | M1 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J7 |
| 1 | FL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | M4 |
| 1 | FR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | M3 |
| 1 | HM-13 Bluetooth | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | J-Link | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J8 |
| 1 | LM1117MP-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | SW_DIP_x02 | Button_Switch_SMD:SW_DIP_SPSTx02_Slide_Omron_A6H-2101_W6.15mm_P1.27mm | SW1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW2 |
| 1 | V_sw | Button_Switch_THT:SW_CK_JS202011CQN_DPDT_Straight | SW3 |
| 1 | jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | mpu6050 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | place_holder | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | programming | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |

giant-axon/lu.i-neuron-pcb
Lu.i is an electronic neuron circuit mimicking and illustrating the basic dynamics of real, biological neurons. The printed circuit board (PCB) features a configurable, fully analog implementation of the leaky…

john0312/hitcon-pcb-badge
execute fw/merge.py to merge STM32CubeIDE generated main.c with user code in main.cc into main.cc.

adlerweb/uPoff
Small circuit/library to shut down a µC to save power for battery powered applications




bezmi/orthrus
56 key wireless split keyboard running on QMK. Staggered Orthogonal layout

PacketChat/MonkeyBadge
This repository contains the hardware design files, badge code, and backend infrastructure code for the HushCon Winter 2023 badge.
It measures 74.4 × 93 mm and has 2 copper layers, 1.6 mm thick.
74 parts, built around the LM1117MP-3.3 and SI2302. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the g951753321/minidrone repository on GitHub, at the commit this page was made from: the board is design/gen1/kicad/minidrone.kicad_pcb and its schematic design/gen1/kicad/minidrone.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).