4 layers320 × 378.2 mm
4 layers109.2 × 64.5 mm
Min evolver
FYNCH-BIO/hardware12eVOLVER Hardware (PCB, 3D printed parts)
- Size
- 109.2 × 64.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 72
- Nets
- 69
- Pads
- 246
- Tracks, vias
- 416, 104
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 1 Jun 2019
- Updated
- 3 Nov 2026
Overview
Min evolver is an open-source printed circuit board by FYNCH-BIO, from the FYNCH-BIO/hardware repository on GitHub. It is a 4-layer board of 109.2 × 64.5 mm with 72 parts on 69 nets, routed with 416 tracks and 104 vias.
It is built around the MCP6004-E/P, AP7361C-33E and L7805CDT. Its parts include 19 capacitors, 14 resistors, 12 diodes, 12 transistors and 6 connectors.
Main components
3
MCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
AP7361C-33E
SOT-223-40℃~+85℃@(Ta) 1 1A 3.3V 340mV@(1A) 6V 75dB@(1kHz) 80uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
L7805CDT
TO-252-2L2V@(350mA) 35V 4.2mA 40uV 500mA 5V 80dB@(120Hz) Fixed Positive Short Circuit Protection TO-252-2L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHXY MOSFETVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdeVOLVER Hardware Components/CAD
This repository contains all hardware CAD files for the eVOLVER continuous culture platform.
For more information on the platform, check out our Nature Biotech publication.
For information on building, troubleshooting, and running experiments on the platform, reach out to us on the eVOLVER forum and read the wiki.
Software Repositories:
Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | .1u | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 12 | D | min-eV-footprint-lib:diode_SBR160S23 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 12 | Q_NMOS_GSD | min-eV-footprint-lib:mosfet_A03422 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 10 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R7, R8, R9, R10, R11, R12, R13, R14 |
| 5 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C16, C17, C18, C19 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | CONN_02X08 | mods:2x8_conn_10in | P2, P3 |
| 2 | Jumper_3_Open | mods:3pinheader_2_54_mm_pitch | JP1, JP2 |
| 1 | 10u | mods:FK18X5R0J105K | C15 |
| 1 | AP7361C-33E | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BARREL_JACK | mods:2.1mm_DC_Jack | CON1 |
| 1 | CONN_01X02 | mods:screw_terminal | P7 |
| 1 | CONN_02X08 | min-eV-footprint-lib:2x8 Connector | P4 |
| 1 | CONN_02X12 | mods:24_pin_10in | P1 |
| 1 | L7805CDT | mods:L7805CDT | U4 |
| 1 | MCP6004 | mods:mcp6004-ssop | U1 |
Questions
How big is the Min evolver PCB?
It measures 109.2 × 64.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Min evolver use?
72 parts, built around the MCP6004-E/P, AP7361C-33E and L7805CDT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Min evolver KiCad files?
From the FYNCH-BIO/hardware repository on GitHub, at the commit this page was made from: the board is min-eVOLVER/min-eV-PCB/min-evolver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Min evolver design in my own project?
Its repository states no licence, so its author keeps all rights: ask FYNCH-BIO before reusing the design.
More from FYNCH-BIO/hardware
12- 4 layers33 × 66 mm
- 4 layers120.6 × 115.3 mm
- 4 layers33 × 66 mm
- 4 layers203.2 × 101.6 mm
- 4 layers266.7 × 123.2 mm
- 2 layers92.7 × 82.6 mm
- 2 layers65 × 56 mm
- 2 layers49.5 × 58.4 mm
- 4 layers33 × 22.9 mm
- 2 layers49.5 × 58.4 mm
- 2 layers109.2 × 139.7 mm
Similar boards
- 4 layers300.9 × 61.1 mm
- 2 layers100 × 100 mm
1.3e
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
157 parts19 - 2 layers50.8 × 50.8 mm
- 4 layers99.7 × 85.1 mm
Motor controller hw
HEEV/motor-controller-2018
Sam Ellicott's and Isaac Jones's motor controller senior design project. Fall 2018-Spring 2019
179 parts4 - 2 layers198.1 × 95.3 mm
- 2 layers39 × 40 mm
Mdb ai bridge esp32s3
nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT
92 parts190MIT - 4 layers68.6 × 53.3 mm
Arduino UNO R4 WiFi
sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.
262 parts95WTFPL - 2 layers284.7 × 94.2 mm
Storyboard
cbskii/storyboard-keyboard
5x12 split ortholinear keyboard with an E-INK display
169 parts30MIT