2 layers20 × 49 mm
Indicator fun V3s
vrubel/indicator-fun-V3s
"indicator.fun" device implementation on the processor Allwinner V3s
168 parts2MIT
2 layers94 × 96.5 mm
Proyecto para simular el reactor arc de iron man mediante un conjunto de leds WS2812 y un ESP32. El esquematico y los pcb estan realizados con kicad.
- Size
- 94 × 96.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 40
- Pads
- 152
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 8 Apr 2019
- Updated
- 8 Apr 2019
Overview
Esq1 is an open-source printed circuit board by FunPythonEC, from the FunPythonEC/ReactorArcV2 repository on GitHub, published under the MIT licence. It is a 2-layer board of 94 × 96.5 mm with 47 parts on 40 nets.
It is built around the CH340G, LM1117-3.3 and WS2812B. Its parts include 17 capacitors, 15 diodes, 6 resistors, 3 ICs and 1 connector. It belongs with the ESP8266 boards of this library.
Main components
3
CH340G
SOP-16-40℃~+85℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdReactorArcV2
Proyecto para simular el reactor arc de iron man mediante un conjunto de leds WS2812 y un ESP32. El esquematico y los pcb estan realizados con kicad.
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 104 | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C12, C13, C17 |
| 9 | WS2812B | WS2812B:WS2812B | D1, D2, D3, D4, D5, D7, D8, D9, D10 |
| 4 | 220 | Resistors_SMD:R_0805_HandSoldering | R3, R4, R5, R6 |
| 2 | 10k | Resistors_SMD:R_0805_HandSoldering | R1, R2 |
| 2 | 10u | Capacitors_SMD:C_0805_HandSoldering | C11, C14 |
| 2 | 22p | Capacitors_SMD:C_0805_HandSoldering | C15, C16 |
| 2 | D | LEDs:LED_0805_HandSoldering | D12, D13 |
| 2 | SW_PUSH_SMALL_H | Buttons_Switches_SMD:SW_SPST_B3U-1000P | Flash1, Rst1 |
| 1 | Bat | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | J1 |
| 1 | Blk | LEDs:LED_0805_HandSoldering | D6 |
| 1 | CH340G | w_smd_dil:so-16 | U3 |
| 1 | Crystal | w_crystal:crystal_hc-49%2fsmd | x1 |
| 1 | ESP-01v090 | ESP8266:ESP-01 | U1 |
| 1 | LM1117-3.3 | TO_SOT_Packages_SMD:SOT-223 | U2 |
| 1 | PWR | LEDs:LED_0805_HandSoldering | D11 |
| 1 | Rx | LEDs:LED_0805_HandSoldering | D14 |
| 1 | Tx | LEDs:LED_0805_HandSoldering | D15 |
| 1 | USB_Adap | Connectors_USB:USB_Micro-B_Molex_47346-0001 | USB_Adap |
| 1 | USB_PC | Connectors_USB:USB_Micro-B_Molex_47346-0001 | USB_PC |
Questions
How big is the Esq1 PCB?
It measures 94 × 96.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esq1 use?
47 parts, built around the CH340G, LM1117-3.3 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esq1 KiCad files?
From the FunPythonEC/ReactorArcV2 repository on GitHub, at the commit this page was made from: the board is Esq1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esq1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers87 × 47 mm
- 2 layers65 × 40 mm
- 2 layers100.1 × 99.9 mm
- 2 layers28 × 48 mm
E meter hardware
www-ShapeLabs-de/sgm4_to_mqtt
ESP8266 electricity meter reading head for SGM-C4 meter with homeassistant mqtt-discovery
34 parts3MIT - 2 layers30.5 × 54.7 mm
ESP32 S3 Breakout
EzerLonginus/ESP32_S3_WROOM_Breakout
Breakout Board for ESP32 S3 WROOM
32 partsGPL-3.0 - 2 layers53 × 47 mm
Servo control
eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32
63 parts208 - 4 layers124 × 38 mm
