

programs for expeyes and expeyes-junior
- Size
- 124 × 38 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 144
- Nets
- 102
- Pads
- 493
- Tracks, vias
- 1,579, 213
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 17 Aug 2012
- Updated
- 22 May 2026
Overview
Proto1 is an open-source printed circuit board by expeyes, from the expeyes/expeyes-programs repository on GitHub. It is a 4-layer board of 124 × 38 mm with 144 parts on 102 nets, routed with 1,579 tracks and 213 vias.
It is built around the PIC24EP64GP204-I/ML, 74HC126D and TL082, with the CH340G, LM324 and MCP2200-I/SS among its other parts. Its parts include 56 resistors, 45 capacitors, 18 ICs, 6 connectors and 4 diodes. It belongs with the PIC boards of this library.
Main components
7PIC24EP64GP204-I/ML
QFN-44-EP(8x8)-40℃~+85℃ 16 Bit 35 3V~3.6V 4KB 64KB Built-in FLASH PIC QFN-44-EP(8x8) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)74HC126D
SO-14-40℃~+125℃ 1 11ns@4.5V,50pF 160uA 2V~6V 4 7.8mA 7.8mA 74HC Tri-State Unidirectional SOIC-14 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffer/Driver/TransceiverTL082
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 13V/us 2 2.5nA 36V 3MHz 3mV 85dB Short-Circuit Protection SOP-8 FET Input Amplifiers ROHSGcoreOperational AmplifierCH340G
SOP-16-40℃~+85℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersLM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational AmplifierMCP2200-I/SS
SSOP-20-208mil-40℃~+85℃ 13mA 1mbps 3V~5.5V 9uA USB 2.0 USB to UART SSOP-20-208mil USB Converters ROHSMicrochip TechnologyUSB ConvertersLM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
README
README.mdexpeyes-programs
programs for expeyes and expeyes-junior
how to build all the programs:
some files are easily generated from sources and are not distributed in this repository.
In order to build all necessary files (including translations, and others),
one can run make from the topmost directory.
Parts
144| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | 10K | MyLib:R_0805 | R1, R2, R10, R14, R15, R16, R17, R18, R19, R21, R22, R23, R25, R27, R28, R29 +15 |
| 26 | 0.1u | MyLib:C_0805 | C1, C3, C10, C13, C17, C22, C24, C25, C26, C27, C28, C31, C32, C33, C34, C35 +10 |
| 9 | 5K1 | MyLib:R_0805 | R8, R9, R12, R26, R40, R41, R43, R53, R56 |
| 5 | TL082 | MyLib:SOIC-8_3.9x4.9mm_Pitch1.27mm | U7, U8, U9, U10, U13 |
| 4 | 100u | MyLib:TantalC_SizeC_EIA-6032_Reflow | C11, C14, C16, C18 |
| 4 | 10u | MyLib:C_0805 | C6, C8, C15, C21 |
| 4 | 1K | MyLib:R_0805 | R5, R11, R47, R48 |
| 3 | 1u | MyLib:C_0805 | C2, C5, C20 |
| 3 | 200K | MyLib:R_0805 | R20, R30, R46 |
| 3 | V- | MyLib:fiducial | FM1, FM2, FM3 |
| 2 | 100 | MyLib:R_0805 | R37, R51 |
| 2 | 15p | MyLib:C_0805 | C44, C45 |
| 2 | 18 | MyLib:R_0805 | R4, R13 |
| 2 | 1M | MyLib:R_0805 | R24, R34 |
| 2 | 22u | SMDCAP:C_1206 | C12, C19 |
| 2 | 3906 | MyLib:SOT-23-EBC | Q1, Q2 |
| 2 | 3p3 | MyLib:C_0805 | C23, C29 |
| 2 | 6S21 | MyLib:SOIC-8_3.9x4.9mm_Pitch1.27mm | U11, U12 |
| 2 | 6v8 | MyLib:SOT-23-zener | D1, D2 |
| 2 | 74HC126 | MyLib:SOIC-14_3.9x8.7mm_Pitch1.27mm | U2, U17 |
| 2 | M | MyLib:MountingHole-clear | MH1, MH2 |
| 1 | 0.5A | MyLib:Fuse-1206-1812 | F1 |
| 1 | 1 | MyLib:R_0805 | R55 |
| 1 | 100K | MyLib:R_0805 | R54 |
| 1 | 10M | MyLib:R_0805 | R45 |
| 1 | 10nF | MyLib:C_0805 | C7 |
| 1 | 1nF | MyLib:C_0805 | C30 |
| 1 | 3033 | TRAN:sot23 | U15 |
| 1 | 3904 | MyLib:SOT-23-EBC | Q3 |
| 1 | 7660 | MyLib:SOIC-8_3.9x4.9mm_Pitch1.27mm | U5 |
| 1 | AVdd | MyLib:myTestPoint | TP1 |
| 1 | CH340G | MyLib:SOIC-16_3.9x9.9mm_Pitch1.27mm | U1 |
| 1 | Inputs | MyLib:speaker-header-14-small | P5 |
| 1 | LED | MyLib:C_0805 | D4 |
| 1 | LED | MyLib:myPin_Header_Straight_1x02 | D3 |
| 1 | LM1117-3.3 | MyLib:SOT-223 | U6 |
| 1 | LM324 | MyLib:SOIC-14_3.9x8.7mm_Pitch1.27mm | U16 |
| 1 | MCP2200 | MyLib:SOIC-20-W | U18 |
| 1 | PIC24EP64GP204 | MyLib:TQFP-44 | U3 |
| 1 | TC1240A | MyLib:SOT-23-6 | U4 |
| 1 | USB-MINI-B | MyLib:myUSB_MINI_B | CON1 |
| 1 | USB2 | MyLib:my-4pin-smd | P3 |
| 1 | V+ | MyLib:myTestPoint | TP3 |
| 1 | V- | MyLib:myTestPoint | TP5 |
| 1 | Vdd | MyLib:myTestPoint | TP2 |
| 1 | Vusb | MyLib:myTestPoint | TP4 |
| 1 | XTL-4pin | MyLib:xtl-3225 | U14 |
| 1 | exp | MyLib:myPin_Header_Straight_1x08-oval | P6 |
| 1 | outputs | MyLib:speaker-header-14-small | P1 |
| 1 | prog | MyLib:PICKIT-PROG | P2 |
| 1 | sw | MyLib:mySwitch-3way | SW1 |
More from expeyes/expeyes-programs
5- 6 layers134 × 84.2 mm

- 6 layers80.2 × 72.3 mm

- 6 layers91.9 × 80.3 mm

- 2 layers54.5 × 81.5 mm

- 2 layers70 × 40 mm

Similar boards
- 4 layers60 × 75 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
143 parts1.7kApache-2.0 - 4 layers90.2 × 95.9 mm

- 2 layers100.1 × 99.9 mm

- 2 layers

- 2 layers72 × 67 mm

- 2 layers75 × 30 mm

Avrdoper re
alexjx/avrdoper-re
AVR-Doper RE is a USB in-system programmer (ISP) for AVR microcontrollers. It is a respin of the original AVR-Doper, updated with an ATmega328P controller, a USB-C connector, selectable 5 V or 3.3 V target power, and a…
42 parts - 2 layers150 × 140 mm

- 2 layers128 × 80 mm

Questions
How big is the Proto1 PCB?
It measures 124 × 38 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Proto1 use?
144 parts, built around the PIC24EP64GP204-I/ML, 74HC126D, TL082 and CH340G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Proto1 KiCad files?
From the expeyes/expeyes-programs repository on GitHub, at the commit this page was made from: the board is ExpEYES17/Schematics/proto1/proto1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Proto1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask expeyes before reusing the design.