2 layers44 × 70.5 mm
2 layers33 × 55 mm
LightConsole
fujiy/Home- Size
- 33 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 34
- Pads
- 116
- Tracks, vias
- 303, 73
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Jul 2026
- Updated
- 5 Jul 2026
Overview
LightConsole is an open-source printed circuit board by fujiy, from the fujiy/Home repository on GitHub. It is a 2-layer board of 33 × 55 mm with 28 parts on 34 nets, routed with 303 tracks and 73 vias.
It is built around the ESP32-C3-WROOM-02-H4 and LM2842XQMK. Its parts include 9 resistors, 5 ICs, 4 diodes, 3 capacitors and 1 transistor. It belongs with the ESP32 and RISC-V boards of this library.
Main components
2
ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
LM2842XQMK
TSOT-23-6L-40℃~+125℃@(TJ) 1 4.5V~42V 550kHz 600mA 765mV~34V Buck Buck Built-in No TSOT-23-6L DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R9 |
| 2 | 10µF | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | LED | LED_THT:LED_D5.0mm | LED1, LED2 |
| 1 | 100 | Resistor_SMD:R_2512_6332Metric | R5 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10uH 1.1A | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 1A | Diode_SMD:D_SOD-123 | D1 |
| 1 | 1M | OptoDevice:R_LDR_5.1x4.3mm_P3.4mm_Vertical | CdS1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | ESP32-C3-WROOM-02 | PCM_Espressif:ESP32-C3-WROOM-02 | U1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LM2842X | Package_TO_SOT_SMD:TSOT-23-6 | U2 |
| 1 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | TSOP331xx | OptoDevice:Vishay_MINIMOLD-3Pin | U4 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | USB1 |
| 1 | ~ | ESP32HomeLibrary:MH-Z19C_Pins | U3 |
| 1 | ~ | ESP32HomeLibrary:AM2322 | U5 |
The 26 most common of 28 parts.
Questions
How big is the LightConsole PCB?
It measures 33 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LightConsole use?
28 parts, built around the ESP32-C3-WROOM-02-H4 and LM2842XQMK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LightConsole KiCad files?
From the fujiy/Home repository on GitHub, at the commit this page was made from: the board is LightConsole/hardware/LightConsole.kicad_pcb and its schematic ACLamp/LEDboard/LEDboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LightConsole design in my own project?
Its repository states no licence, so its author keeps all rights: ask fujiy before reusing the design.
More from fujiy/Home
8- 2 layers45 × 40 mm
- 2 layers20 × 77 mm
- 2 layers29.5 × 38 mm
- 2 layers16 × 65 mm
- 2 layers43.9 × 41.8 mm
- 2 layers80 × 60 mm
- 2 layers30 × 50 mm
Similar boards
- 2 layers50 × 66 mm
- 2 layers155.5 × 130 mm
Einkpicframe
Spritetm/picframe_colepd
A WiFi picture frame allowing for remote photo uploads, using an ESP32-C3 and a 5.6" color E-ink display
60 parts97 - 2 layers18 × 14.4 mm
- 2 layers60 × 30 mm
- 2 layers88.6 × 30 mm
- 2 layers79.9 × 36.2 mm
Desk display
nepyope/Project-Homunculus
Project Homunculus is open-source, low-cost hardware for capturing human hand and arm motions. It has two parts.
63 parts51 - 2 layers76.8 × 23.5 mm
SommerESP
exico91/SommerESP
A plug and play ESP32-C3 board to control Sommer garage doors
41 parts29MIT - 2 layers51 × 71 mm
