
Foocars led flipboard
fubarlabs/foocars
Low Cost Racing Autonomous Vehicles: RC Cars to Power Wheels Racers

Low Cost Racing Autonomous Vehicles: RC Cars to Power Wheels Racers
Foocars pwm teensy is an open-source printed circuit board by fubarlabs, from the fubarlabs/foocars repository on GitHub. It is a 2-layer board of 53.3 × 44.2 mm with 18 parts on 18 nets, routed with 151 tracks and 18 vias.
Its parts include 7 connectors, 4 resistors and 1 diode.
This autonomous vehicle project's goal is to create autonomous racing vehicles in the simplest possible way—a good first car. The name is a mash-up of Fubar Labs, the mysterious planes called "foo fighters" and "foobar" the ubiquitous getting started variables for programming. The control system can scale to any vehicles using RC controls.
Autonmous Vehicle Project at Fubar Labs for the Autonomous Powerwheels Racing compeition.
Obtain the car code by cloning the project
git clone https://github.com/fubarlabs/foocarsFor the Tensorflow 1.15 version fetch the wheel file to the local system:
cd ~/foocars
sh get_tensorflow.shInstall system packages
sudo apt-get install build-essential cmake pkg-config libjpeg-dev libtiff5-dev libjasper-dev libpng-dev libavcodec-dev libavformat-dev libswscale-dev libv4l-dev libxvidcore-dev libx264-dev libfontconfig1-dev libcairo2-dev libgdk-pixbuf2.0-dev libpango1.0-dev libgtk2.0-dev libgtk-3-dev libatlas-base-dev gfortran libhdf5-dev libhdf5-serial-dev libhdf5-103 libqtgui4 libqtwebkit4 libqt4-test python3-pyqt5Install poetry
sudo pip3 install poetryInstall platformio
sudo pip3 install platformioUse poetry to create the generate the car
cd ~/foocars/cargenerator
poetry install
poety run generatecar --name yourhostname --output_dir /home/pi/foocars/cars/Use poetry to create the car code and service
cd ~/foocars/cars/carservices
poetry installTest the PI Hat
poetry run test_pihatTest the Car Runner
poetry run car_runnerVerify the leds and switches are working.
Code is installed from the Raspberry PI using PLatform IO
sudo pip3 install platformiocd ./cars/templatecar/arduino/teensy-FullAutoDrive-portpio run -t uploadSet up the raspberry pi services
cd /etc/systemd/system/
sudo ln -s ~/foocars/cars/carservices/carservices/car.service
sudo systemctl start car
tail -f /var/log/syslogVerify the car service is running the car runner
Find a system with a good gpu. It was slow but worked on a Raspberry PI 4.
cd ~/foocars/training
poetry install
poetry shellThe training command:
Using TensorFlow backend.
usage: train.py [-h] [--weight_filename WEIGHT_FILENAME]
[--init_weights INIT_WEIGHTS] [--delay DELAY]
[--epochs EPOCHS] [--save_frequency SAVE_FREQUENCY]
directories [directories ...]Run the training:
python train.py --epochs 100 --save_frequency 2 ../cars/youcar/data/collectedhttps://colab.research.google.com/drive/1oT3M4QVUoNYkFh4pzktVNBfT0zULwSpM?usp=sharing
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 4 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J6, J7 |
| 2 | MountingHole | MountingHole:MountingHole_2.5mm_Pad | H1, H2 |
| 1 | BOTTOM_HALF | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | J2 |
| 1 | BattMon | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Input | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Horizontal | J4 |
| 1 | Output | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Horizontal | J3 |
| 1 | TOP_HALF | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | J1 |
| 1 | TVS Suppression | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | D1 |

fubarlabs/foocars
Low Cost Racing Autonomous Vehicles: RC Cars to Power Wheels Racers


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.


Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
It measures 53.3 × 44.2 mm and has 2 copper layers, 1.6 mm thick.
18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fubarlabs/foocars repository on GitHub, at the commit this page was made from: the board is schematics/teensy-board/foocars-pwm-teensy.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask fubarlabs before reusing the design.