

Ballmill
- Size
- 98 × 88 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 85
- Nets
- 99
- Pads
- 322
- Tracks, vias
- 535, 58
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 31 Jul 2025
- Updated
- 31 Jul 2025
Overview
Ballmill is an open-source printed circuit board by Froneusz, from the Froneusz/design-PCBs repository on GitHub. It is a 2-layer board of 98 × 88 mm with 85 parts on 99 nets, routed with 535 tracks and 58 vias.
It is built around the CP2102N-A01-GQFN24, ESP32-S3-WROOM-1-N8 and PCF8574T, with the BC817, SP0502BAHTG and USB4105-GF-A among its other parts. Its parts include 28 resistors, 17 capacitors, 10 diodes, 7 switches and 6 ICs. It belongs with the ESP32 boards of this library.
Main components
6CP2102N-A01-GQFN24
QFN-24-EP(4x4)3Mbps 3V~3.6V Transceiver QFN-24-EP(4x4) USB Converters ROHSSilicon LabsUSB ConvertersESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesPCF8574T
SOP-16-300mil-40℃~+85℃ 100kHz 10uA 2.5V~6V 25mA 300uA 8 8 Cascading and address extension、Built-in LED driver I2C Interrupt Output Open-drain SOP-16-300mil I/O Expanders ROHSHGSEMII/O ExpandersBC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)SP0502BAHTG
SOT-23-40℃~+125℃ 100nA 2 30pF 5.5V 8.5V IEC 61000-4-2 TVS Unidirectional SOT-23 ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)USB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
Parts
85| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4, R5, R6, R20, R21 |
| 6 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D10, D11 |
| 6 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6 |
| 5 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C14, C15, C17, C18 |
| 5 | 2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R9, R12, R19 |
| 4 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C8, C11 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R25, R26 |
| 3 | BC817 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q4, Q5 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R24 |
| 2 | Conn_01x02 | PUT_RocketLab_other:XY2500R-DS(5.08)-02P | J3, J4 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 10K(NC) | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23 |
| 1 | 22.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 240R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 33K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R28 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 47.5K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 47R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 4N35 | Package_DIP:DIP-6_W7.62mm | U2 |
| 1 | 560R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29 |
| 1 | Buzzer | PUT_RocketLab_other:CMI9605IC0580T | BZ1 |
| 1 | CP2102N-A01-GQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U4 |
| 1 | D | PUT_RocketLab_other:PinHeader_1x02_P2.54mm_Vertical_led_relayboard_lpbox | D5 |
| 1 | D | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7 |
| 1 | ESP32-S3-WROOM-1 | PUT_RocketLab_IC:ESP32-S3-WROOM-1 | U1 |
| 1 | LM78L05_SO8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | Lamp | PUT_RocketLab_other:PinHeader_1x02_P2.54mm_Vertical_led_relayboard_lpbox | LA1 |
| 1 | PCF8574 | PUT_RocketLab_IC:QFN50P300X300X100-17N-D | U6 |
| 1 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q3 |
| 1 | RM84 | Relay_THT:Relay_DPDT_Finder_40.52 | K1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | SD15_SOD323 | Diode_SMD:D_0805_2012Metric | D8 |
| 1 | SP0502BAHT | Package_TO_SOT_SMD:SOT-23 | D6 |
| 1 | TLV75901PDRVT | PUT_RocketLab_IC:TLV75901PDRVT | U5 |
| 1 | USB4105-GF-A | PUT_RocketLab_other:GCT_USB4105-GF-A | J2 |
| 1 | WC1602A | Display:WC1602A | DS1 |
The 83 most common of 85 parts.
More from Froneusz/design-PCBs
2- 4 layers45 × 75 mm

- 2 layers61.2 × 45.2 mm

Similar boards
- 2 layers160 × 124 mm

- 2 layers28 × 65 mm

- 4 layers77.9 × 81.6 mm

Lilygo
Ndambia/lilygo
A custom 4-layer KiCad PCB design integrating an ESP32 Wi-Fi/Bluetooth microcontroller with a SIM7600G-H 4G LTE Cat-4 cellular module, comprehensive power management, GPS tracking, GPRS connectivity, USB-C charging…
188 parts - 2 layers150 × 100 mm

SmartCube
kokhaie/Smart-Refrigerator-Demo
The KiCad-generated BOM is mirrored into the documentation site under docs/ so it can be published through GitHub Pages.
91 parts - 2 layers75 × 50 mm

Openeew openeew sensor pcb
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
104 parts1 - 2 layers87 × 47 mm

- 2 layers144.1 × 108.1 mm

- 2 layers
.kicad_pcb.jpg?size=s&soon)
Questions
How big is the Ballmill PCB?
It measures 98 × 88 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ballmill use?
85 parts, built around the CP2102N-A01-GQFN24, ESP32-S3-WROOM-1-N8, PCF8574T and BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ballmill KiCad files?
From the Froneusz/design-PCBs repository on GitHub, at the commit this page was made from: the board is ballmill/ballmill.kicad_pcb and its schematic Nosecone/LDO,Charger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ballmill design in my own project?
Its repository states no licence, so its author keeps all rights: ask Froneusz before reusing the design.