
Z3660 v022
shanshe/Z3660
Amiga 4000 CPU accelerator board based on A3660 and Z-turn FPGA board

TeensyIrrigation is an open-source printed circuit board by freudenthal, from the freudenthal/TeensyIrrigation repository on GitHub. It is a 2-layer board of 165.1 × 88.9 mm with 178 parts on 145 nets, routed with 1,696 tracks and 340 vias.
It is built around the MAX3232ID, TEENSY 4.1 and PCF8574TS/3, with the FM24CL16B-G among its other parts. Its parts include 78 resistors, 44 diodes, 28 capacitors, 20 connectors and 5 ICs. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | 100V | Package_TO_SOT_SMD:SOT-23-3 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20 |
| 34 | 10kΩ | Resistor_SMD:R_0805_2012Metric | R1, R4, R5, R6, R10, R13, R17, R21, R22, R25, R26, R29, R33, R37, R41, R63 +18 |
| 23 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C10, C11, C12, C13, C14, C17, C19, C20, C24, C25, C26, C29, C30 +7 |
| 20 | 0Ω | Resistor_SMD:R_0805_2012Metric | R2, R3, R11, R12, R14, R15, R16, R18, R19, R20, R23, R24, R27, R28, R31, R32 +4 |
| 12 | 50Ω | Resistor_SMD:R_0805_2012Metric | R43, R44, R45, R46, R47, R48, R49, R50, R51, R52, R53, R54 |
| 9 | 500Ω | Resistor_SMD:R_0805_2012Metric | R30, R34, R38, R42, R57, R59, R60, R61, R62 |
| 8 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5, J6, J7, J8, J9, J10, J11, J12 |
| 6 | LED | LED_SMD:LED_0805_2012Metric | D39, D40, D41, D42, D43, D44 |
| 4 | 100uF | Capacitor_SMD:CP_Elec_8x11.9 | C16, C22, C27, C28 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | J1, J2, J3, J4 |
| 2 | 100kΩ | Resistor_SMD:R_0805_2012Metric | R55, R56 |
| 2 | 10V | Diode_SMD:D_SOD-123 | D37, D38 |
| 2 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SPI | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J15, J16 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C15 |
| 1 | 2032Coin | BatteryCoin:BC2032 | BT1 |
| 1 | 330kΩ | Resistor_SMD:R_0805_2012Metric | R58 |
| 1 | FM24CL16B | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | MAX3232 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U4 |
| 1 | PCF8574TS | Package_SO:SSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | RSS232In | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J14 |
| 1 | RSS232Out | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J13 |
| 1 | TCA9548APWR | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U2 |
| 1 | Teensy4.1 | Teensy:Teensy41 | U1 |
| 1 | UART5 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J19 |
| 1 | UART6 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J20 |
| 1 | UART8 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J18 |
| 1 | V_{IN} | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J17 |

shanshe/Z3660
Amiga 4000 CPU accelerator board based on A3660 and Z-turn FPGA board



freudenthal/I2CTCA9548Multiplexer
An I2C multiplexer using a TCA9548 and a PCF8574 for interrupt.



3komma3volt/LoRaWeatherStation_Hardware
A simple stand-alone self-sufficient weather station using LoRa for data transmission

Minorzar/2223_Projet1A_SNES_Controller
This is the repository of the snes project made in the ENSEA by the 2025 promotion.
It measures 165.1 × 88.9 mm and has 2 copper layers, 1.6 mm thick.
178 parts, built around the MAX3232ID, TEENSY 4.1, PCF8574TS/3 and FM24CL16B-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the freudenthal/TeensyIrrigation repository on GitHub, at the commit this page was made from: the board is TeensyIrrigation.kicad_pcb and its schematic DigitalIO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask freudenthal before reusing the design.