
VLAD
icl-rocketry/VLAD-CanSat
Repository Containing the hardware and firmware of VLAD, a stabby boi who will participate in the Mach-21 CanSat competition

IN18-nixie clock is an open-source printed circuit board by langestefan, from the langestefan/IN18-nixie-clock repository on GitHub. It is a 2-layer board with 108 parts on 179 nets.
It is built around the ESP32-WROOM-32, MAX1771CSA+ and PCF8574TS/3, with the IP4220CZ6F, MPSA42 and WS2812B among its other parts. Its parts include 35 resistors, 27 transistors, 18 capacitors, 7 ICs and 6 diodes. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | MPSA42 | Package_TO_SOT_THT:TO-92_Inline | Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q23, Q24, Q25, Q26, Q27 +6 |
| 20 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12, R14, R17, R19, R20, R21, R22, R23, R24, R25, R26, R28, R31, R33 +4 |
| 11 | 100n | Capacitor_SMD:C_0402_1005Metric | C9, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21 |
| 6 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2, D3, D4, D5, D6, D7 |
| 4 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7, R8, R9 |
| 4 | 10u 35v | Capacitor_SMD:C_0805_2012Metric | C7, C8, C10, C11 |
| 4 | 33k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R18, R27, R32 |
| 2 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R29 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 12K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 2 | 470K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R30 |
| 2 | 74HC42D,652 | Logic_user:SOIC127P600X175-16N | U6, U7 |
| 2 | IN18 | Nixie_tubes:nixies-us-IN-18-DSUB | N1, N2 |
| 2 | MPSA92 | Package_TO_SOT_THT:TO-92_Inline | Q10, Q22 |
| 2 | SS8050-G | BJT_user:SOT95P240X115-3N | Q2, Q3 |
| 2 | USB_B_Micro | USB_conn_user:USB_Micro-B_EDAC_UCON00686 | J1, J2 |
| 1 | 100nF, 250V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U4 |
| 1 | CTS | TestPoint:TestPoint_Pad_D2.0mm | TP4 |
| 1 | DCD | TestPoint:TestPoint_Pad_D2.0mm | TP6 |
| 1 | DSR | TestPoint:TestPoint_Pad_D2.0mm | TP5 |
| 1 | DTR | TestPoint:TestPoint_Pad_D2.0mm | TP10 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U3 |
| 1 | ESP_EN | TestPoint:TestPoint_Pad_D2.0mm | TP9 |
| 1 | IP4220CZ6F | ESD_user:SOT95P275X110-6N | U2 |
| 1 | IRF644PBF | FET_user:TO254P465X1024X2050-3P | Q1 |
| 1 | MAX1771CSA+ | Regulator_user:SOIC127P600X175-8N | U1 |
| 1 | PCF8574TS | Package_SO:SSOP-20_4.4x6.5mm_P0.65mm | U5 |
| 1 | PROG_EN | TestPoint:TestPoint_Pad_D2.0mm | TP8 |
| 1 | RI | TestPoint:TestPoint_Pad_D2.0mm | TP7 |
| 1 | RTS | TestPoint:TestPoint_Pad_D2.0mm | TP11 |
| 1 | RX | TestPoint:TestPoint_Pad_D2.0mm | TP3 |
| 1 | TX | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | VBUS | TestPoint:TestPoint_Pad_D2.0mm | TP1 |

icl-rocketry/VLAD-CanSat
Repository Containing the hardware and firmware of VLAD, a stabby boi who will participate in the Mach-21 CanSat competition



DangerousPrototypes/BusPirate5-hardware
Bus Pirate Hardware and accessories for v5 and higher

profdc9/NixieClock
A Nixie clock that uses IN-14 tubes and very generic components that can be easily sourced.

nachocarballeda/gclass_amplifier
Diseño de un amplificador clase G para la materia Circuitos Electronicos 2. FIUBA


Majklzbastlirny/NixieClock
ESP-IDF firmware for a 6-tube multiplexed ESP32 nixie clock (WiFi/SNTP, Home Assistant, web UI, alarm, temperatures)
108 parts, built around the ESP32-WROOM-32, MAX1771CSA+, PCF8574TS/3 and IP4220CZ6F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the langestefan/IN18-nixie-clock repository on GitHub, at the commit this page was made from: the board is hardware/kicad/in18_nixie_clock/in18_nixie_clock.kicad_pcb and its schematic hardware/kicad/in18_nixie_clock/esp32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask langestefan before reusing the design.