6 layers54.6 × 57.1 mm
CM5 MINIMA 2
piecol/CM5_MINIMA_REV2
Compact, feature-filled CM5 carrier board
102 parts170CERN-OHL-S-2.0
4 layers170 × 115 mm
Usb2517 pinlevel
freeprochat/USB-hubKiCad overspec usb hub
- Size
- 170 × 115 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 42
- Pads
- 181
- Tracks, vias
- 39, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8 (file 20240108)
- Created
- 10 Sep 2026
- Updated
- 11 Sep 2026
Overview
Usb2517 pinlevel is an open-source printed circuit board by freeprochat, from the freeprochat/USB-hub repository on GitHub. It is a 4-layer board of 170 × 115 mm with 19 parts on 42 nets, routed with 39 tracks and 0 vias.
It is built around the AP22653W6 and AP2112K-3.3. Its parts include 10 ICs and 9 connectors.
Main components
2
AP22653W6
SOT-26-40℃~+85℃ 1 2.1A 3V~5.5V 65mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Over Voltage Protection、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Overtemperature protection (OTP) SOT-26 Power Distribution Switches ROHSDiodes IncorporatedPower Distribution Switches
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
README
usb2517_pinlevel_complete_kicad/README.mdUSB2517 pin-level KiCad project
This package contains a normal legacy KiCad schematic with a custom cache library, a 64-pin USB2517 symbol, explicit pin-to-net connectivity matrix, a four-layer PCB with pads, named nets, differential routes, high-current power routes and GND/5V zones. KiCad 6-9 can open and convert the legacy .sch to modern .kicad_sch.
Important: The PCB is a complete connected engineering draft, not a production release. The Molex and TI footprints are dimensionally tagged but are not authenticated manufacturer ECAD downloads. Run ERC/DRC after conversion on a workstation with KiCad installed, confirm all footprint land patterns from the current drawings, tune USB impedance to the fab stackup, and perform power/thermal/USB compliance testing.
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | AP22653 | usb_hub:AP22653 | U3, U4, U5, U6, U7, U8, U9 |
| 7 | GCT_USB1086 | usb_hub:GCT_USB1086 | J2, J3, J4, J5, J6, J7, J8 |
| 1 | AP2112K | usb_hub:AP2112K | U2 |
| 1 | MOLEX_480370001 | usb_hub:MOLEX_480370001 | J1 |
| 1 | PHOENIX_1715721 | usb_hub:PHOENIX_1715721 | J9 |
| 1 | TPS548B22_RVF40 | usb_hub:TPS548B22_RVF40 | U10 |
| 1 | — | usb_hub:USB2517_JZX_QFN64_EP | U1 |
Questions
How big is the Usb2517 pinlevel PCB?
It measures 170 × 115 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Usb2517 pinlevel use?
19 parts, built around the AP22653W6 and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usb2517 pinlevel KiCad files?
From the freeprochat/USB-hub repository on GitHub, at the commit this page was made from: the board is usb2517_pinlevel_complete_kicad/usb2517_pinlevel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usb2517 pinlevel design in my own project?
Its repository states no licence, so its author keeps all rights: ask freeprochat before reusing the design.
Similar boards
- 4 layers54.6 × 57.1 mm
CM5 MINIMA
piecol/CM5_MINIMA_REV1
CM5 LoRaWAN carrier board in a compact, feature-filled footprint
98 parts63CERN-OHL-S-2.0 - 4 layers170 × 170 mm
CM5IO
sanctuary-systems-com/rpi-cm5io-mini-itx
A mini ITX board with PCIe x16 based on the Raspberry Pi Comput Module 5 IO board
75 parts29CERN-OHL-P-2.0 - 4 layers110 × 100 mm
- 6 layers125 × 125 mm
Libreboard broken
256foundation/libreboard
Open Source Bitcoin Mining Control Board
193 parts21CERN-OHL-S-2.0 - 4 layers80 × 70 mm
CM4IOv5
vega-d/CM4-nano-carrierboard
A simplified carrier board for RPI CM4 module featuring reduced footprint.
66 parts11GPL-3.0 - 6 layers46.5 × 47.2 mm
NAVCORE SoOP
kfilipekk/iridium_drone
STM32H743 flight controller that navigates without GPS from Iridium satellite Doppler
217 parts2MIT - 6 layers100 × 220 mm
