Skip to the content
2 layers124 × 60 mmEurocard mux, the printed circuit board in 3D

10ch -> 10A - 10B mux board for ert measurements. Uses dpdt latching relays to switch between A and B channels. and has front and rear connectors for easy wiring. Allso includes diodes for indicating relay state.

Size
124 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
38
Pads
146
Tracks, vias
302, 179
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Jan 2026
Updated
15 Jan 2026

Overview

Eurocard mux is an open-source printed circuit board by fredriknk, from the fredriknk/manual_multiplexer repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 124 × 60 mm with 20 parts on 38 nets, routed with 302 tracks and 179 vias.

It is built around the AGQ210A12Z and LTST-C170KRKT. Its parts include 6 switches, 5 connectors, 2 resistors and 2 diodes.

Main components

2

README

README.md

eurocard_mux

HEADER

10ch -> 10A - 10B mux board for ert measurements. Uses dpdt latching relays to switch between A and B channels. and has front and rear connectors for easy wiring. Allso includes diodes for indicating relay state.

PCB layout SCHEMATIC

FRONT

Front

BACK

Back

SIDE

Side

Before major commmits

Remember to run generate_outputs.bat/sh to update the outputs and pictures. readmetemplate

Parts

20
QtyValueFootprintReferences
6AGQ210A12Zmuxlib_footprints:Relay_2P2T_10x6mm_TE_IMxxG_LonglegsK1, K2, K3, K4, K5, K6
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
31759091Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_10-G-5,08_1x10_P5.08mm_HorizontalJ1, J2, J5
21K1Resistor_SMD:R_0805_2012MetricR1, R2
2LTST-C170KRKTLED_SMD:LED_0805_2012MetricD1, D2
2MC-254-12-00-RA-DIPConnector_IDC:IDC-Header_2x06_P2.54mm_HorizontalJ3, J4
1G***kibuzzard-693809E3kibuzzard-693809E3

Similar boards

  • 4 layers233 × 230.5 mmBB3plus mainboard, the printed circuit board in 3D

    BB3plus mainboard

    eez-open/eez-bb3plus

    EEZ Bench Box 3 Plus (BB3+) Modular T&M chassis

    439 parts13
  • 6 layers113 × 99 mmUlx4m panel, the printed circuit board in 3D

    Ulx4m panel

    intergalaktik/ulx4m-ls

    ULX4M Lattice SDRAM

    970 parts5
  • 6 layers100 × 100 mmBms board, the printed circuit board in 3D

    Bms board

    AerospaceNU/bms-pcb-design

    373 parts4
  • 2 layers68 × 110 mmMultimeter, the printed circuit board in 3D

    Multimeter

    schuyler4/Multimeter

    My multimeter design.

    133 parts3MIT
  • 4 layers60.6 × 72.3 mmESP32, the printed circuit board in 3D

    ESP32

    KirtiChickamath/ESP32-IoT-sensor-board

    ESP32- IoT sensor board. 4-layer PCB, designed in KiCad . Features LiPo charging, USB-C, SPI flash, SD card, BME280, and more.

    90 parts2
  • 4 layers74.4 × 64.2 mmIot device pcb, the printed circuit board in 3D

    Iot device pcb

    ODARI-CHARLES1/iot_device_pcb

    Hardware design for a air conditioner pcb design using Kicad software. This is for learning purpose only not manufacturable.

    76 parts2
  • 4 layers89 × 54.5 mmESP32 sensor board, the printed circuit board in 3D

    ESP32 sensor board

    andreschaparro/udemy-advanced-pcb-design-with-kicad-9

    93 parts1
  • 4 layers77.5 × 59.5 mmIOT, the printed circuit board in 3D

    IOT

    aryan-asit/Telemetry-iot-project

    In this project , a 4 layer custom pcb is made for Telematics

    85 parts1

Questions

How big is the Eurocard mux PCB?

It measures 124 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Eurocard mux use?

20 parts, built around the AGQ210A12Z and LTST-C170KRKT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Eurocard mux KiCad files?

From the fredriknk/manual_multiplexer repository on GitHub, at the commit this page was made from: the board is CAD/eurocard_mux/eurocard_mux.kicad_pcb and its schematic CAD/eurocard_mux/eurocard_mux.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Eurocard mux design in my own project?

Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).