
ESP32 IOT
WasikeIsaac/ESP32_IOT-PCB-
ESP32 IoT board: 4-layer KiCad PCB with USB-C, BME280, mic, audio amp, SD card, GPIO breakout. Full custom design from schematic to layout.

Hardware design for a air conditioner pcb design using Kicad software. This is for learning purpose only not manufacturable.
Iot device pcb is an open-source printed circuit board by ODARI-CHARLES1, from the ODARI-CHARLES1/iot_device_pcb repository on GitHub. It is a 4-layer board of 74.4 × 64.2 mm with 76 parts on 90 nets, routed with 160 tracks and 91 vias.
It is built around the ESP32-S3-WROOM-1-N8, MCP73871EV and BME280, with the AMS1117-3.3, MPU-6050 and LTST-C170KGKT among its other parts. Its parts include 28 resistors, 17 capacitors, 10 diodes, 6 connectors and 5 ICs. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
An IoT device PCB designed for logging and transmitting data.

MIT
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C5, C6, C8, C9, C10, C10, C12, C13, C14, C15 |
| 9 | 470R | Resistor_SMD:R_0201_0603Metric | R3, R5, R6, R7, R15, R16, R26, R27, R28 |
| 7 | 10K | Resistor_SMD:R_0805_2012Metric | R8, R9, R10, R11, R17, R18, R19 |
| 6 | LTST-C170KGKT | LED_SMD:LED_0805_2012Metric | LED2, LED3, LED5, LED6, LED7, LED8 |
| 4 | 4.7K | Resistor_SMD:R_0201_0603Metric | R20, R21, R22, R23 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm_Pad_Via | H1, H5, H6, H7 |
| 3 | 47K5 | Resistor_SMD:R_0201_0603Metric | R13, R24, R25 |
| 3 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C7, C11 |
| 2 | 470n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 5.1k | Resistor_SMD:R_0201_0603Metric | R1, R2 |
| 2 | Conn_01x04_Pin | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J4, J5 |
| 2 | LTST-C170KRKT | LED_SMD:LED_0805_2012Metric | LED1, LED4 |
| 2 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | D1, D2 |
| 2 | USLPT2819DT2TR | USLPT2819DT2TR:SW_USLPT2819DT2TR | S1, S2 |
| 1 | 0 | Resistor_SMD:R_0201_0603Metric | R4 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1k | Resistor_SMD:R_0201_0603Metric | R14 |
| 1 | 22.1K | Resistor_SMD:R_0201_0603Metric | R12 |
| 1 | 220p | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | B2B-PH-K-S_LF__SN_ | Connector_JST:JST_ACH_BM01B-ACHSS-A-GAN-ETF_1x01-1MP_P1.20mm_Vertical | J1 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U5 |
| 1 | Conn_01x07_Pin | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-7-5.08_1x07_P5.08mm_Horizontal | J6 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U4 |
| 1 | MCP73871 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U2 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U6 |
| 1 | RAYEX-L90 | Relay_THT:Relay_1-Form-C_Schrack-RYII_RM3.2mm | K1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |

WasikeIsaac/ESP32_IOT-PCB-
ESP32 IoT board: 4-layer KiCad PCB with USB-C, BME280, mic, audio amp, SD card, GPIO breakout. Full custom design from schematic to layout.


Kaushalyasamantha/ESP32-C3-IoT-Dev-Board
"A custom 4-layer IoT development board built around the ESP32-C3 in KiCad 9"

pasensiojimenez/esp32-sensor-board
4-layer ESP32-C3 IoT development board designed in KiCad 10. Onboard power management (USB-C/LiPo), environmental sensors (BME280, light, sound), and SD/flash storage.

andrewcnjuguna/ESP32_BME690
Multi-room ESP32-S3 environmental sensor node that streams air-quality data to a Node.js server over Wi-Fi. Built around the Bosch BME690 with auxiliary light, sound and battery monitoring.



chopda15/ESP32-sensor-board
Custom-designed ESP32-C3 IoT PCB with integrated Li-ion charging, environmental sensing, data logging, USB-C connectivity, and power-efficient embedded system architecture.
It measures 74.4 × 64.2 mm and has 4 copper layers, 1.6 mm thick.
76 parts, built around the ESP32-S3-WROOM-1-N8, MCP73871EV, BME280 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ODARI-CHARLES1/iot_device_pcb repository on GitHub, at the commit this page was made from: the board is iot_device_pcb.kicad_pcb and its schematic Actuators.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ODARI-CHARLES1 before reusing the design.