
Iagabel panel
fredowski/ialf
Linefollower board based on Raspberry Pi Pico with Seeed Grove Connectors and DRV8835 motor driver.

Linefollower board based on Raspberry Pi Pico with Seeed Grove Connectors and DRV8835 motor driver.
Ialightsens is an open-source printed circuit board by fredowski, from the fredowski/ialf repository on GitHub. It is a 2-layer board of 20 × 24 mm with 12 parts on 7 nets, routed with 45 tracks and 30 vias.
It is built around the LMV358 and L200HY-4PS. Its parts include 5 resistors, 2 capacitors, 1 IC and 1 transistor. It belongs with the robots and motor control boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2_ISO7380 | H1, H2 |
| 1 | L200HY-4PS | ialightsens:GROVE-HW4-SMD-2.0 | G1 |
| 1 | LMV358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | SFH-3710-Z | OptoDevice:Osram_SFH3710 | Q1 |

fredowski/ialf
Linefollower board based on Raspberry Pi Pico with Seeed Grove Connectors and DRV8835 motor driver.

fredowski/ialf
Linefollower board based on Raspberry Pi Pico with Seeed Grove Connectors and DRV8835 motor driver.

fredowski/ialf
Linefollower board based on Raspberry Pi Pico with Seeed Grove Connectors and DRV8835 motor driver.

fredowski/ialf
Linefollower board based on Raspberry Pi Pico with Seeed Grove Connectors and DRV8835 motor driver.

esp-ebus/ebus-adapter-hardware
This repo conains KiCAD design of eBUS bus powered (without external supply) adapter to WiFi.





humancomputerintegration/BOH-Electro-Tactile
This is the repository for PCB schematics and Arduino codes used for the "Full-Hand Electro Tactile Feedback without Obstructing Palmar Side of Hand" paper (ACM CHI2023).


M4a1x/nmr-spectrometer
My master thesis at D-CHAB (ETH Zürich) - Building a 25MHz NMR spectrometer
It measures 20 × 24 mm and has 2 copper layers, 1.6 mm thick.
12 parts, built around the LMV358 and L200HY-4PS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fredowski/ialf repository on GitHub, at the commit this page was made from: the board is ialightsens/ialightsens.kicad_pcb and its schematic iagabel/iagabel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask fredowski before reusing the design.