
Iaracershield
fredowski/ialf
Linefollower board based on Raspberry Pi Pico with Seeed Grove Connectors and DRV8835 motor driver.

Linefollower board based on Raspberry Pi Pico with Seeed Grove Connectors and DRV8835 motor driver.
Iagabel panel is an open-source printed circuit board by fredowski, from the fredowski/ialf repository on GitHub. It is a 2-layer board of 107 × 118 mm with 352 parts on 8 nets, routed with 744 tracks and 304 vias.
It is built around the 74LVC2G14GW, A2008WR-S-4P and KT-0603R, with the TCUT1300X01 among its other parts. Its parts include 56 resistors, 8 capacitors, 8 ICs, 8 diodes and 8 connectors. It belongs with the robots and motor control boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 13k | Resistor_SMD:R_0603_1608Metric | R3, R3, R3, R3, R3, R3, R3, R3, R4, R4, R4, R4, R4, R4, R4, R4 +16 |
| 24 | MountingHole | MountingHole:MountingHole_2.2mm_M2_ISO7380 | H1, H1, H1, H1, H1, H1, H1, H1, H2, H2, H2, H2, H2, H2, H2, H2 +8 |
| 16 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP2, TP2, TP2, TP2, TP2, TP2, TP2, TP2 |
| 8 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C1, C1, C1, C1, C1, C1, C1 |
| 8 | 150 dnp | Resistor_SMD:R_0805_2012Metric | R2, R2, R2, R2, R2, R2, R2, R2 |
| 8 | 150R | Resistor_SMD:R_0805_2012Metric | R1, R1, R1, R1, R1, R1, R1, R1 |
| 8 | 470R | Resistor_SMD:R_0603_1608Metric | R5, R5, R5, R5, R5, R5, R5, R5 |
| 8 | 74LVC2G14GW | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U1, U1, U1, U1, U1, U1, U1, U1 |
| 8 | A2008WR-S-4P | iagabel:A2008WR-S-4P | J1, J1, J1, J1, J1, J1, J1, J1 |
| 8 | KT-0603R | Diode_SMD:D_0603_1608Metric | D1, D1, D1, D1, D1, D1, D1, D1 |
| 8 | TCUT1300X01 | iagabel:Vishay-TCUT | K1, K1, K1, K1, K1, K1, K1, K1 |
The 136 most common of 352 parts.

fredowski/ialf
Linefollower board based on Raspberry Pi Pico with Seeed Grove Connectors and DRV8835 motor driver.

fredowski/ialf
Linefollower board based on Raspberry Pi Pico with Seeed Grove Connectors and DRV8835 motor driver.

fredowski/ialf
Linefollower board based on Raspberry Pi Pico with Seeed Grove Connectors and DRV8835 motor driver.

fredowski/ialf
Linefollower board based on Raspberry Pi Pico with Seeed Grove Connectors and DRV8835 motor driver.



skumlos/bkm-10rlternative
Project aiming to replicate the BKM-10R/11R remote for Sony professional CRT monitors.

Mr-Bossman/SD_Swap
A development tool which swaps an sdcard between a usb3 card reader or a SBC.

mikelawrence/WiFi-Gate-Controller
WiFi enabled Gate Controller Addon to US Automatic Gate Opener

mikelawrence/WiFi-Septic-Controller
WiFi enabled Septic Controller


It measures 107 × 118 mm and has 2 copper layers, 1.6 mm thick.
352 parts, built around the 74LVC2G14GW, A2008WR-S-4P, KT-0603R and TCUT1300X01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fredowski/ialf repository on GitHub, at the commit this page was made from: the board is iagabel/iagabel-panel.kicad_pcb and its schematic iagabel/iagabel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask fredowski before reusing the design.