

PDU v1
Power delivery board
- Size
- 57.6 × 60.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 19
- Pads
- 223
- Tracks, vias
- 138, 228
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Jan 2026
- Updated
- 20 Mar 2026
Overview
PDU v1 is an open-source printed circuit board by Fred0809, from the Fred0809/PDB repository on GitHub. It is a 2-layer board of 57.6 × 60.8 mm with 64 parts on 19 nets, routed with 138 tracks and 228 vias.
It is built around the INA240A2D, TPS54360BQDDAQ1 and SMCJ28A, with the SS34 among its other parts. Its parts include 30 capacitors, 14 connectors, 10 resistors, 2 ICs and 2 diodes.
Main components
4INA240A2D
SOIC-8-40℃~+125℃ -4V~80V 1 1.8mA 132dB 2.7V~5.5V 250nV/℃ 2V/us 400kHz 40nV/√Hz@1kHz 50V/V 5uV 90uA Bidirectional detection、Zero drift / auto-zero、Programmable output reference level、Analog output interface ±80V SOIC-8 Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense AmplifiersTPS54360BQDDAQ1
SOIC-8-EP-40℃~+150℃@(TJ) 1 2.5MHz 3.5A 4.5V~60V 800mV~58.8V Adjustable Buck Buck Built-in No SOIC-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersSMCJ28A
SMC(DO-214AB)ESD And Surge Protection (TVS/ESD)hongjiachengSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdPDB
The project uses XT60 conenctor for battery input and screw terminals for ESCs output. The board idea is to have fuse, current measurement, and buck converter to 5V. Curent measuremnt from INA amp is sent to FCU, mounted above, with JST-XH conenctor together with 5V, VBAT voltage measurement, and GND.
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | Screw_Terminal_01x01 | TerminalBlock_Wuerth:Wuerth_REDCUBE-THR_WP-THRSH_74651173_THR | J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13 |
| 11 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C9, C10, C11, C12, C13, C14, C15, C16, C21, C28 |
| 7 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22, C23, C24, C25, C26, C27, C29 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad | H1, H2, H3, H4 |
| 2 | 100uF | Capacitor_SMD:C_1825_4564Metric_Pad1.57x6.80mm_HandSolder | C19, C20 |
| 2 | 13k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4 |
| 2 | 2.2uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1, C5 |
| 2 | 220uF | Capacitor_SMD:C_1825_4564Metric_Pad1.57x6.80mm_HandSolder | C8, C18 |
| 2 | 47uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C7 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C30 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 147k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 162k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 39pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 470uF | Capacitor_SMD:C_1825_4564Metric_Pad1.57x6.80mm_HandSolder | C17 |
| 1 | 6800pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 68k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 8.2uH | Inductor_SMD:L_Coilcraft_XAL6060-XXX | L2 |
| 1 | Conn_01x02_Pin | Connector_AMASS:AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J1 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J14 |
| 1 | Fuse | Fuse:Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolder | F3 |
| 1 | INA240A2D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | R | Resistor_SMD:R_Shunt_Vishay_WSR2_WSR3 | R7 |
| 1 | SMCJ28A | Diode_SMD:D_SMC | D1 |
| 1 | SS34 | Diode_SMD:D_SMA | D3 |
| 1 | TPS54360BQDDAQ1 | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U1 |
More from Fred0809/PDB
1- 4 layers67.6 × 60.8 mm

Similar boards
- 4 layers76.7 × 44.5 mm

- 4 layers100 × 50 mm

Psu ext
PSU-Ext-Org/psu-ext-hardware
A repository to store PSU-EXT hardware design assets, schematics, circuit diagrams, CAD files and manufacturing data.
137 parts9CERN-OHL-S-2.0 - 4 layers35 × 35 mm

Foc8313
williamhaarhoff/foc8313
Highly compact field oriented controller based on the DRV8313 IC
155 parts9 - 4 layers82 × 60 mm

P1 tx
Deco025/resonare
Resonare: open-source 120 W LCC-S resonant wireless charger, transmitter and receiver boards (KiCad 10, 4-layer)
92 parts4CERN-OHL-S-2.0 - 4 layers100 × 99.4 mm

- 2 layers97 × 97 mm

- 2 layers180 × 150 mm

- 2 layers103 × 88.9 mm

Questions
How big is the PDU v1 PCB?
It measures 57.6 × 60.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PDU v1 use?
64 parts, built around the INA240A2D, TPS54360BQDDAQ1, SMCJ28A and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PDU v1 KiCad files?
From the Fred0809/PDB repository on GitHub, at the commit this page was made from: the board is PCB/PDU_v1/PDU_v1.kicad_pcb and its schematic PCB/PDU_v1/PDU_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PDU v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Fred0809 before reusing the design.