
Sample Numeric Keyboard
famichu/MagLev_Switch_MX
The 3D printable magnetic levitation contactless switch with the linear output hall effect sensor.

Join me as I build the most generic PCB project
LEDWallSign SORTED BACKUP is an open-source printed circuit board by frankie-eight-days, from the frankie-eight-days/ledWallSign repository on GitHub. It is a 2-layer board with 207 parts on 187 nets.
It is built around the ATMEGA328-AU, RAC10-05SK/277 and TLC6C598-Q1D, with the KSR251GLFS among its other parts. Its parts include 101 resistors, 66 diodes, 25 capacitors, 10 ICs and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 66 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R100, R101, R102, R103, R104, R105, R106, R107, R208, R209, R210, R211, R212, R213, R214, R215 +50 |
| 66 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D100, D101, D102, D103, D104, D105, D106, D107, D208, D209, D210, D211, D212, D213 +50 |
| 17 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R190, R193, R290, R293, R390, R393, R490, R493, R590, R593, R690, R693, R790, R793, R890 +1 |
| 16 | DNP | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R191, R192, R291, R292, R391, R392, R491, R492, R591, R592, R691, R692, R791, R792, R891, R892 |
| 12 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C4, C5, C7, C191, C291, C391, C491, C591, C691, C791, C891 |
| 9 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C190, C290, C390, C490, C590, C690, C790, C890 |
| 8 | TLC6C598-Q1 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U100, U200, U300, U400, U500, U600, U700, U800 |
| 2 | 0 | Resistor_SMD:R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | R1, R2 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C8, C9 |
| 1 | 100pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C6 |
| 1 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 8MHz | ledWallSign-master:ECS-23G | Y1 |
| 1 | ATmega328-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_WallPlug | ledWallSign-master:Qualtek 770W-X2 | P1 |
| 1 | Ferrite_Bead | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | ISP Header | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | KSR251GLFS | ledWallSign-master:KSR251GLFS | SW1 |
| 1 | RAC10-05SK | ledWallSign-master:RAC10-05SK | U2 |

famichu/MagLev_Switch_MX
The 3D printable magnetic levitation contactless switch with the linear output hall effect sensor.

dqydj/PaperBack_EPaper_Display
Internet Connected or Standard Input EPaper Display

etimou/arduino-pro-mini-kicad
This is a clone of the well known arduino board "pro-mini" designed in kicad while the original was designed in eagle. Ref https://store.arduino.cc/arduino-pro-mini

andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers



207 parts, built around the ATMEGA328-AU, RAC10-05SK/277, TLC6C598-Q1D and KSR251GLFS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the frankie-eight-days/ledWallSign repository on GitHub, at the commit this page was made from: the board is LEDWallSign SORTED BACKUP.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask frankie-eight-days before reusing the design.