

Stm32 pcb
- Size
- 61.6 × 103.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 25
- Pads
- 287
- Tracks, vias
- 324, 67
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Jun 2021
- Updated
- 12 Nov 2021
Overview
Stm32 pcb is an open-source printed circuit board by frankemcgarvey, from the frankemcgarvey/seniorDesign repository on GitHub. It is a 4-layer board of 61.6 × 103.1 mm with 50 parts on 25 nets, routed with 324 tracks and 67 vias.
It is built around the STM32H755ZIT6, AMS1117-3.3 and K12SC S 1.5 5N O LFTX. Its parts include 28 capacitors, 8 connectors, 3 resistors, 2 ICs and 1 switch. It belongs with the STM32 boards of this library.
Main components
3STM32H755ZIT6
LQFP-144(20x20)-40℃~+85℃ 1.62V~3.6V 12bit 16bit 1MB 240MHz、480MHz 2MB 32 Bit 97 ARM Cortex-M4、ARM Cortex-M7 Built-in FLASH LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsK12SC S 1.5 5N O LFTX
SMDSMD Pushbutton Switches ROHSC&KPush Switches
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C4, C5, C6, C7, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C25 |
| 5 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2, J5, J6, J7 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4_Pad_Via | H1, H2, H3, H4 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C19, C20, C28 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C21, C22 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C23, C26 |
| 2 | 24pF | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | Ferrite_Bead_Small | Inductor_SMD:L_0805_2012Metric | FB1, FB2 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C24 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 2.2uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 220pF | Capacitor_SMD:C_0402_1005Metric | C27 |
| 1 | 47 | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Crystal_GND24_Small | crystal:OSC_ABM3B-8.000MHZ-B2-T | Y1 |
| 1 | K12SCS1.55NOLFTX | push_sw:K12SCS1.55NOLFTX | SW2 |
| 1 | STM32H755ZIT6 | stm32h7:STM32H755ZIT6 | U1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J4 |
More from frankemcgarvey/seniorDesign
1- 2 layers20.1 × 20 mm

Similar boards
- 4 layers130.8 × 58.8 mm

- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

Questions
How big is the Stm32 pcb PCB?
It measures 61.6 × 103.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Stm32 pcb use?
50 parts, built around the STM32H755ZIT6, AMS1117-3.3 and K12SC S 1.5 5N O LFTX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm32 pcb KiCad files?
From the frankemcgarvey/seniorDesign repository on GitHub, at the commit this page was made from: the board is PCB/stm32_pcb/stm32_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm32 pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask frankemcgarvey before reusing the design.