

PCB originally designed for use in the Bamboo project
- Size
- 250.9 × 102 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 152
- Nets
- 116
- Pads
- 712
- Tracks, vias
- 1,069, 74
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Jan 2021
- Updated
- 7 Jan 2021
Overview
Bamboo is an open-source printed circuit board by FrancisUsher, from the FrancisUsher/bambingus-pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 250.9 × 102 mm with 152 parts on 116 nets, routed with 1,069 tracks and 74 vias.
It is built around the ATMEGA32U4-AU, WS2812B and PRTR5V0U2X. Its parts include 65 diodes, 52 switches, 20 capacitors, 7 resistors and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedPRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
Parts
152| Qty | Value | Footprint | References |
|---|---|---|---|
| 51 | D_Small | Keebio-Parts:D_SOD123 | D1, D2, D10, D11, D12, D13, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +35 |
| 49 | SW_Push | keyswitches:Kailh_socket_PG1350 | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +33 |
| 16 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C4, C5, C6, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20 |
| 13 | WS2812B | MyFiles:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D53, D54, D55, D56, D57, D58, D59, D60, D61, D62, D63, D64, D65 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R6 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 5.11k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | SW_Push | keyswitches:Kailh_socket_PG1350_1.5 | SW45, SW46 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 16Mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1m | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 632722110112 | bamboo BLE - V3:632722110112 | J1 |
| 1 | ATmega32U4-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | Blank | MyFiles:bamboo | Null1 |
| 1 | Buzzer | Keebio-Parts:AST1109MLTRQ | BZ1 |
| 1 | CONN_01X04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | P1 |
| 1 | Jumper_NC_Small | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP1 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D14 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_SKQG_WithoutStem | SW52 |
Similar boards
- 2 layers285.5 × 112.1 mm

- 4 layers76.2 × 115.5 mm

Tfk21-avr
biosmanager/tfk
A WIP collection of open-source high-end keyboard PCBs featuring hot-swap sockets, per-key and underglow RGB lighting, USB-C and overcurrent/overvoltage/ESD protection. Designed to be hand-solderable.
123 parts - 2 layers339.1 × 118.7 mm

Puffazz arisu v2
bridgeandcities/puffazz-arisu-v2
Custom PCB for the Arisu keyboard with LED underglow and USB-C support.
190 partsMIT - 2 layers337.2 × 122.6 mm

- 2 layers243.9 × 136.5 mm

Barobord
sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!
157 parts57 - 2 layers217.7 × 91.1 mm

- 2 layers298.8 × 122 mm

Ursaminor pcb
markstory/ursa-minor-keyboard
Design and schematics for the ursaminor keyboard
225 parts23 - 2 layers242.3 × 75.4 mm

Questions
How big is the Bamboo PCB?
It measures 250.9 × 102 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bamboo use?
152 parts, built around the ATMEGA32U4-AU, WS2812B and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bamboo KiCad files?
From the FrancisUsher/bambingus-pcb repository on GitHub, at the commit this page was made from: the board is bamboo.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bamboo design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).