2 layers85.2 × 71.3 mm
Bootarooni
phooky/bootarooni
A Raspberry Pi Pico (RP2040) based Apple IIe expansion card with USB isolation.
34 parts12
2 layers96.5 × 76.2 mm
AntiMonitor
FoxCutter/CubitSource code repo for the Cubit z80 computer project
- Size
- 96.5 × 76.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 53
- Pads
- 150
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 May 2016
- Updated
- 26 Aug 2022
Overview
AntiMonitor is an open-source printed circuit board by FoxCutter, from the FoxCutter/Cubit repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 96.5 × 76.2 mm with 18 parts on 53 nets.
It is built around the 74LS299DC. Its parts include 4 connectors, 3 capacitors, 3 ICs, 2 diodes and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdCubit
Source code repo for the Cubit z80 computer project
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 74LS299 | Package_DIP:DIP-20_W7.62mm_Socket | U1, U2, U3 |
| 3 | C_Small | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Address Bus | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J2 |
| 1 | Arduino_Nano_v2.x | Module:Arduino_Nano | A1 |
| 1 | D_ALT | Diode_THT:D_A-405_P7.62mm_Horizontal | D2 |
| 1 | Data Bus | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LOGO | Private_lib:Fox Logo | G*** |
| 1 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | PWR Connection | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW2 |
| 1 | SW_SPDT | Button_Switch_THT:SW_CuK_JS202011CQN_DPDT_Straight | SW1 |
| 1 | System Bus | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J4 |
Questions
How big is the AntiMonitor PCB?
It measures 96.5 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AntiMonitor use?
18 parts, built around the 74LS299DC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AntiMonitor KiCad files?
From the FoxCutter/Cubit repository on GitHub, at the commit this page was made from: the board is Boards/AntiMonitor/AntiMonitor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AntiMonitor design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers137 × 101.1 mm
Z80 board1
alexfreed58/z80-CPM-board-with-smart-i-o
This is yet another retro computer running CPM on an actual Z80 CPU with a twist. Instead of using a traditional UART for communications, it uses a RPi pico module that is no bigger and no more expensive than a UART.
48 parts2MIT - 2 layers
- 2 layers99.1 × 158.8 mm
- 2 layers235 × 160 mm
Input output.Text
lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus
87 parts15 - 2 layers100 × 100 mm
Dram test
Edgeworth/memepu
cmake -DUSEAFL=yes -DCMAKEBUILDTYPE=Release $PFX/verymeme AFLSKIPCPUFREQ=yes AFLPRELOAD=/usr/local/lib/afl/libdislocator.so \ afl-fuzz -m 1024M -i $PFX/verymeme/testdata/memelang/parsing -o memelangfuzz \ -x…
52 parts9GPL-3.0 - 2 layers71.4 × 53.3 mm
Arrington Eprom Programmer
abzman/Exidy-Sorcerer-Stuff
boards and maybe software for the exidy sorcerer
19 parts5 - 2 layers99.1 × 99.1 mm
