
Cpu
Edgeworth/memepu
cmake -DUSEAFL=yes -DCMAKEBUILDTYPE=Release $PFX/verymeme AFLSKIPCPUFREQ=yes AFLPRELOAD=/usr/local/lib/afl/libdislocator.so \ afl-fuzz -m 1024M -i $PFX/verymeme/testdata/memelang/parsing -o memelangfuzz \ -x…

cmake -DUSEAFL=yes -DCMAKEBUILDTYPE=Release $PFX/verymeme AFLSKIPCPUFREQ=yes AFLPRELOAD=/usr/local/lib/afl/libdislocator.so \ afl-fuzz -m 1024M -i $PFX/verymeme/testdata/memelang/parsing -o memelangfuzz \ -x…
Dram test is an open-source printed circuit board by Edgeworth, from the Edgeworth/memepu repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 100 mm with 52 parts on 266 nets.
It is built around the 74LS299DC, GTL2000DGG and 74HC04D. Its parts include 14 capacitors, 14 ICs, 12 resistors and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Also need: Verilator, Yosys, Yices2, SymbiYosys
sudo apt install libsfml-dev extra-cmake-modules libboost-dev libboost-stacktrace-dev
build-essential clang bison flex libreadline-dev gawk tcl-dev libffi-dev git
graphviz xdot pkg-config python3 libboost-system-dev libboost-python-dev
libboost-filesystem-dev autoconf libboost-stacktrace-dev libboost-program-options-dev
gperf libgmp-dev cmake
sudo pacman -S sfml extra-cmake-modules
TODO fill out.
memelang ./src/memepile/{integral,memory,pointer,stdintf,vector,string,token,main}.meme
Run run.py to run the tests for both SCHEMATIC and non-SCHEMATIC verilog configurations.
Process for adding a new leaf module for verymeme:
Build with:
export PFX=./
cmake -DUSE_AFL=yes -DCMAKE_BUILD_TYPE=Release $PFX/verymeme
AFL_SKIP_CPUFREQ=yes AFL_PRELOAD=/usr/local/lib/afl/libdislocator.so
afl-fuzz -m 1024M -i $PFX/verymeme/test_data/memelang/parsing -o memelang_fuzz
-x $PFX/verymeme/assets/afl/memelang.dict -- ./memelang @@
Or for persistent mode: cmake -DUSE_AFL=clang -DCMAKE_BUILD_TYPE=Release $PFX/verymeme
AFL_SKIP_CPUFREQ=yes AFL_PRELOAD=/usr/local/lib/afl/libdislocator.so
afl-fuzz -m 1024M -i $PFX/verymeme/test_data/memelang/parsing -o memelang_fuzz
-x $PFX/verymeme/assets/afl/memelang.dict -t 100 -- ./memelang
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 0.1uF | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 9 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R12 |
| 8 | 74LS299 | Package_DIP:DIP-20_W7.62mm_Socket | U7, U8, U9, U10, U11, U12, U13, U14 |
| 6 | 100K | Resistor_THT:R_Array_SIP9 | RN1, RN2, RN3, RN4, RN5, RN6 |
| 4 | GTL2000 | Package_SO:TSSOP-48_6.1x12.5mm_P0.5mm | U3, U4, U5, U6 |
| 4 | TestPoint | TestPoint:TestPoint_Bridge_Pitch5.08mm_Drill1.3mm | 1.8V1, 3.3V1, GND1, VCC5V1 |
| 3 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R10, R11 |
| 2 | 74HC04 | Package_DIP:DIP-14_W7.62mm_Socket | U1, U2 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | SODIMM-200 | cpu:Socket_SODIMM_DDR1-2_TE_1612618 | J1 |

Edgeworth/memepu
cmake -DUSEAFL=yes -DCMAKEBUILDTYPE=Release $PFX/verymeme AFLSKIPCPUFREQ=yes AFLPRELOAD=/usr/local/lib/afl/libdislocator.so \ afl-fuzz -m 1024M -i $PFX/verymeme/testdata/memelang/parsing -o memelangfuzz \ -x…

hedj/radio
A minimal software-defined radio, based on the GreenArrays GA144A12 microprocessor. Provision is made for connection to a Raspberry Pi B+ and shields.

alexfreed58/z80-CPM-board-with-smart-i-o
This is yet another retro computer running CPM on an actual Z80 CPU with a twist. Instead of using a traditional UART for communications, it uses a RPi pico module that is no bigger and no more expensive than a UART.


phooky/bootarooni
A Raspberry Pi Pico (RP2040) based Apple IIe expansion card with USB isolation.



lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

abzman/Exidy-Sorcerer-Stuff
boards and maybe software for the exidy sorcerer
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
52 parts, built around the 74LS299DC, GTL2000DGG and 74HC04D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Edgeworth/memepu repository on GitHub, at the commit this page was made from: the board is pcb/dram_test/dram_test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).