FOSSEE/openplc_modulesAddon modules for OpenPLC experiments. - Traffic light - represent a 3 way traffic light - Motor driver for lift - circuit required for driving the motor, receiving and passing on the limit-switch state and as an…
Switches is an open-source printed circuit board by FOSSEE, from the FOSSEE/openplc_modules repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 90 mm with 44 parts on 34 nets, routed with 164 tracks and 19 vias.
Its parts include 16 resistors, 12 connectors, 10 diodes and 6 transistors.
Addon modules for OpenPLC experiments.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | R_US | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 11 | Conn_01x01_Female | Wire_Pads:SolderWirePad_single_SMD_5x10mm | J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12 |
| 6 | 2N7002 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | L1 | LEDs:LED_1206_HandSoldering | D5 |
| 1 | L2 | LEDs:LED_1206_HandSoldering | D6 |
| 1 | NC1 | LEDs:LED_1206_HandSoldering | D7 |
| 1 | NC2 | LEDs:LED_1206_HandSoldering | D8 |
| 1 | NC3 | LEDs:LED_1206_HandSoldering | D9 |
| 1 | NC4 | LEDs:LED_1206_HandSoldering | D10 |
| 1 | NO1 | LEDs:LED_1206_HandSoldering | D1 |
| 1 | NO2 | LEDs:LED_1206_HandSoldering | D2 |
| 1 | NO3 | LEDs:LED_1206_HandSoldering | D3 |
| 1 | NO4 | LEDs:LED_1206_HandSoldering | D4 |
| 1 | switchesOut | Socket_Strips:Socket_Strip_Straight_1x12_Pitch2.54mm | J1 |
It measures 50 × 90 mm and has 2 copper layers, 1.6 mm thick.
44 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FOSSEE/openplc_modules repository on GitHub, at the commit this page was made from: the board is switches/switches.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
FOSSEE/openplc_modules
Addon modules for OpenPLC experiments. - Traffic light - represent a 3 way traffic light - Motor driver for lift - circuit required for driving the motor, receiving and passing on the limit-switch state and as an…
FOSSEE/openplc_modules
Addon modules for OpenPLC experiments. - Traffic light - represent a 3 way traffic light - Motor driver for lift - circuit required for driving the motor, receiving and passing on the limit-switch state and as an…
FOSSEE/openplc_modules
Addon modules for OpenPLC experiments. - Traffic light - represent a 3 way traffic light - Motor driver for lift - circuit required for driving the motor, receiving and passing on the limit-switch state and as an…
mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos
qbancoffee/imac_g3_ivad_board_init
iMac G3 IVAD board initialization with an arduino
Stefan-Olt/MISRC
MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.
