Addon modules for OpenPLC experiments. - Traffic light - represent a 3 way traffic light - Motor driver for lift - circuit required for driving the motor, receiving and passing on the limit-switch state and as an…
Motor is an open-source printed circuit board by FOSSEE, from the FOSSEE/openplc_modules repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 40 mm with 16 parts on 18 nets, routed with 124 tracks and 1 via.
It is built around the L293D. Its parts include 4 resistors, 4 diodes, 4 connectors, 2 capacitors and 1 IC. It belongs with the robots and motor control boards of this library.
Addon modules for OpenPLC experiments.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 470 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R1, R2, R3 |
| 2 | 1uf | Capacitors_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2 |
| 1 | 1K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R4 |
| 1 | L293D | Housings_DIP:DIP-16_W7.62mm_Socket_LongPads | U1 |
| 1 | error | LEDs:LED_D5.0mm | D4 |
| 1 | first | LEDs:LED_D3.0mm | D2 |
| 1 | from switches | Connectors_JST:JST_EH_B04B-EH-A_04x2.50mm_Straight | J2 |
| 1 | ground | LEDs:LED_D3.0mm | D1 |
| 1 | motor | TerminalBlocks_Phoenix:TerminalBlock_Phoenix_MPT-2.54mm_2pol | J3 |
| 1 | power | Connectors_JST:JST_EH_B04B-EH-A_04x2.50mm_Straight | J1 |
| 1 | second | LEDs:LED_D3.0mm | D3 |
| 1 | towards uC | Connectors_JST:JST_EH_B05B-EH-A_05x2.50mm_Straight | J4 |
The 15 most common of 16 parts.
FOSSEE/openplc_modules
Addon modules for OpenPLC experiments. - Traffic light - represent a 3 way traffic light - Motor driver for lift - circuit required for driving the motor, receiving and passing on the limit-switch state and as an…
FOSSEE/openplc_modules
Addon modules for OpenPLC experiments. - Traffic light - represent a 3 way traffic light - Motor driver for lift - circuit required for driving the motor, receiving and passing on the limit-switch state and as an…
FOSSEE/openplc_modules
Addon modules for OpenPLC experiments. - Traffic light - represent a 3 way traffic light - Motor driver for lift - circuit required for driving the motor, receiving and passing on the limit-switch state and as an…
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)
geno543/Redropi_highway
the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…
harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.
It measures 50 × 40 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FOSSEE/openplc_modules repository on GitHub, at the commit this page was made from: the board is motor/motor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
