

Magic epaper
Magic ePaper Hardware
- Size
- 59.2 × 52.9 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 57
- Nets
- 45
- Pads
- 190
- Tracks, vias
- 346, 128
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Nov 2017
- Updated
- 25 Sep 2025
Overview
Magic epaper is an open-source printed circuit board by fossasia, from the fossasia/magic-epaper-hardware repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 59.2 × 52.9 mm with 57 parts on 45 nets, routed with 346 tracks and 128 vias.
It is built around the XC6206P362MR, 1N5819W and AO3400. Its parts include 31 capacitors, 9 resistors, 4 diodes, 4 connectors and 3 ICs. It belongs with the lEDs and displays boards and the RISC-V boards of this library.
Main components
3XC6206P362MR
SOT-23-25℃~+80℃@(Ta) 1 200mV@(50mA) 250mA 3.6V 40dB@(1kHz) 7uA 8V Fixed Over Current Protection、Short Circuit Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators1N5819W
SOD-12313A 350mA 40V 5uA@30V 600mV@200mA Standalone SOD-123 Schottky Diodes ROHSJSMSEMISchottky DiodesAO3400
SOT-23-55℃~+150℃ 1 N-channel 1.05nF 1.4V 1.5W 28mΩ@10V 30V 5.8A 77pF N-Channel SOT-23 MOSFETs ROHSGOODWORKMOSFETs
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100uF | Capacitor_SMD:C_1206_3216Metric | C15, C16, C17, C18, C19, C20, C21, C22, C23, C24 |
| 7 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C11 |
| 6 | 104 | Capacitor_SMD:C_0402_1005Metric | C7, C10, C14, C25, C26, C28 |
| 4 | Cx | Capacitor_SMD:C_0402_1005Metric | C27, C29, C30, C31 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3 |
| 3 | 1N5819W | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 1 | 0.47R | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 1k5 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 4R7 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 68uH | Inductor_SMD:L_Changjiang_FNR3015S | L1 |
| 1 | AO3400 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CH32V003FxPx | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | Conn_01x04 | magic-epaper:conn_1x04_smd | J4 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | NFC Antenna | magic-epaper:NFC-ANT | AE1 |
| 1 | ST25DV04K | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | USB_C_Receptacle_USB2.0_16P | magic-epaper:USB_C_Receptacle_GCT_USB4110 | J3 |
| 1 | XC6206P362MR | Package_TO_SOT_SMD:SOT-23-3 | U3 |
| 1 | ~ | magic-epaper:FFC-1x24-1MP_P0.5mm_Horizontal | J1 |
The 56 most common of 57 parts.
Similar boards
- 2 layers90 × 25.5 mm

- 2 layers16.5 × 16.2 mm

- 2 layers34 × 38.4 mm

Oledmotion
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
47 parts114 - 2 layers31.8 × 25.4 mm

- 2 layers299 × 82.5 mm

PixelWave
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
663 parts915 - 8 layers146 × 102 mm
![[DFR1144][M027.00940](V1.0.0), the printed circuit board in 3D](/embed/boards/LattePandaTeam/LattePanda-Mu.jpg?size=s&soon)
[DFR1144][M027.00940](V1.0.0)
LattePandaTeam/LattePanda-Mu
All About LattePanda Mu N100/N305 Compute Module
495 parts309MIT - 6 layers39.5 × 39.5 mm

- 2 layers99.5 × 90.5 mm

Questions
How big is the Magic epaper PCB?
It measures 59.2 × 52.9 mm and has 2 copper layers, 0.8 mm thick.
What parts does the Magic epaper use?
57 parts, built around the XC6206P362MR, 1N5819W and AO3400. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Magic epaper KiCad files?
From the fossasia/magic-epaper-hardware repository on GitHub, at the commit this page was made from: the board is magic-epaper.kicad_pcb and its schematic magic-epaper.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Magic epaper design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).