Skip to the content
4 layers78.4 × 54.3 mmMotorDriverPCB, the printed circuit board in 3D

printed circuit board files stored here.

Size
78.4 × 54.3 mm
Copper layers
4
Thickness
1.6 mm
Parts
27
Nets
28
Pads
90
Tracks, vias
184, 29
Pours
4
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
23 Oct 2024
Updated
11 Apr 2025

Overview

MotorDriverPCB is an open-source printed circuit board by FORWARD-Walker, from the FORWARD-Walker/FORWARD-PCB repository on GitHub. It is a 4-layer board of 78.4 × 54.3 mm with 27 parts on 28 nets, routed with 184 tracks and 29 vias.

It is built around the L298N and STTH212U. Its parts include 8 diodes, 5 connectors, 3 resistors, 1 IC and 1 transistor.

Main components

2

README

README.md

MAIN contains ESP-32D Wroom, sensors, and connectors to other boards. POWER contains voltage regulators and connection for AA battery pack.

Parts

27
QtyValueFootprintReferences
8STTH212UDiode_SMD:D_SMBD1, D2, D3, D4, D5, D6, D7, D8
2Conn_02x04_Counter_ClockwiseConnector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_VerticalJ2, J3
2Screw_Terminal_01x02Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_HorizontalH1, H2
110kResistor_SMD:R_0805_2012MetricR3
11kResistor_SMD:R_0805_2012MetricR2
12N2219Package_TO_SOT_THT:TO-39-3Q1
1Conn_01x02_SocketConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_HorizontalJ5
1Conn_01x03_SocketConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ4
1Conn_01x16_PinConnector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_HorizontalJ1
1L298NL298N:TO127P2020X500X2100-15U3
1LOGOLambda:lambdaG***
1R_PhotoResistor_THT:R_Box_L8.4mm_W2.5mm_P5.08mmR1
1R_PotentiometerPotentiometer_THT:Potentiometer_ACP_CA6-H2,5_HorizontalRV1
1Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalLt1

The 23 most common of 27 parts.

More from FORWARD-Walker/FORWARD-PCB

4
  • 4 layers84.9 × 90.5 mmFORWARD PCB, the printed circuit board in 3D

    FORWARD PCB

    FORWARD-Walker/FORWARD-PCB

    printed circuit board files stored here.

    54 parts1
  • 2 layers82.3 × 41.3 mmFORWARD POWER, the printed circuit board in 3D

    FORWARD POWER

    FORWARD-Walker/FORWARD-PCB

    printed circuit board files stored here.

    22 parts1

Similar boards

  • 2 layers130 × 80 mmPico controller, the printed circuit board in 3D

    Pico controller

    cclienti/tig-welder

    A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

    125 parts8GPL-3.0
  • 2 layers76.1 × 85 mmFlypi, the printed circuit board in 3D

    Flypi

    amchagas/Flypi

    This is the repository for the flypi project

    45 parts88GPL-2.0
  • 4 layers85 × 54 mmPECDR, the printed circuit board in 3D

    PECDR

    pedro-ibs/trekking

    Desenvolvimento de um robô rádio-controlado/autônomo da moralidade “tracker”

    68 parts9
  • 2 layers66.3 × 34.3 mmC64PSUv3, the printed circuit board in 3D

    C64PSUv3

    FabioNMI/C64PSU

    A low-cost, lightweight and very reliable power supply for the Commodore 64

    37 parts2
  • 2 layersRoboForce, the printed circuit board in 3D

    RoboForce

    Khuzhin06/RoboForce

    Тогда вы не зря зашли к нам, мы постараемся максимально подробно и быстро рассказать о нашем пути создания робота на ROS2 Jazzy и esp32,по этим материалам вы с легкостью сможете повторить этот проект.

    3 parts2
  • 2 layersRP2040 minimal, the printed circuit board in 3D

    RP2040 minimal

    ltherreraro/Wally

    Recolector de basura espacios cerrados usando esp32

    58 parts2
  • 2 layers127 × 117.5 mmDiy ert, the printed circuit board in 3D

    Diy ert

    CainPatel/diy-ert

    A $150 four-electrode earth resistivity meter (Wenner array): Arduino, AD620, ADS1115. Documented failure-first as an engineering log.

    44 parts1MIT
  • 2 layers99.5 × 99.5 mmSchematicKiCadProyect, the printed circuit board in 3D

    SchematicKiCadProyect

    dduarteCE/Robot-vacuum

    Embedded Linux robotic vacuum system built with Yocto on Raspberry Pi 4, featuring autonomous navigation, audio playback, and remote control through a web interface.

    42 parts1MIT

Questions

How big is the MotorDriverPCB PCB?

It measures 78.4 × 54.3 mm and has 4 copper layers, 1.6 mm thick.

What parts does the MotorDriverPCB use?

27 parts, built around the L298N and STTH212U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MotorDriverPCB KiCad files?

From the FORWARD-Walker/FORWARD-PCB repository on GitHub, at the commit this page was made from: the board is FORWARD-CONTROLLER/MotorDriverPCB.kicad_pcb and its schematic FORWARD-CONTROLLER/MotorDriverPCB.kicadBefore_March_14_sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MotorDriverPCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask FORWARD-Walker before reusing the design.