Schmitt trigger test
Hardware repository for the FORT system
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 5
- Pads
- 21
- Tracks, vias
- 45, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Jul 2019
- Updated
- 22 May 2026
Overview
Schmitt trigger test is an open-source printed circuit board by formicidae-tracker, from the formicidae-tracker/hardware repository on GitHub. It is a 2-layer board with 8 parts on 5 nets, routed with 45 tracks and 0 vias.
It is built around the 74LVC1G17Z and 1N4148WS. Its parts include 2 capacitors, 2 resistors, 2 connectors, 1 IC and 1 diode.
Main components
274LVC1G17Z
SOT-553-40℃~+125℃ 1 1 1.65V~5.5V 10uA 32mA 32mA 4.4ns@5V,15pF 74LVC Push-pull Schmitt trigger Unidirectional SOT-553 Buffers, Drivers, Receivers, Transceivers ROHSDiodes IncorporatedBuffers, Drivers, Receivers, Transceivers1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
README
README.mdFORmicidae Tracker (FORT) : Hardware Blueprints and Firmware
The FORmicidae Tracker (FORT) is an advanced online tracking system designed specifically for studying social insects, particularly ants and bees, FORT utilizes fiducial markers for extended individual tracking. Its key features include real-time online tracking and a modular design architecture that supports distributed processing. The project's current repositories encompass comprehensive hardware blueprints, technical documentation, and associated firmware and software for online tracking and offline data analysis.
This repository holds electronic blueprints and firmware source code of the formicidae-tracker project.
Licenses
Files in this repository are licensed under either one of the two following licenses:
- Files under the
ecadfolder, unless specified otherly, are licensed under CERN OSHL v1.2. - All other files, unless specified otherly, are licensed under GNU Lesser General Public License v3.0 or later.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x03 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J1, J2 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323 | D1 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2 |
| 1 | 74LVC1G17 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1 |
| 1 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
More from formicidae-tracker/hardware
12- 2 layers100 × 100 mm

- 2 layers182.9 × 54.6 mm

- 2 layers84 × 60 mm

- 2 layers70 × 100 mm

- 2 layers55 × 95 mm

- 2 layers80 × 45 mm

- 2 layers120 × 120 mm

- 2 layers65 × 50 mm

- 2 layers80 × 45 mm

- 2 layers57 × 63 mm

- 2 layers55 × 50 mm

- 2 layers72 × 36 mm

Similar boards
- 2 layers

- 2 layers99 × 99 mm

- 4 layers100 × 100 mm

- 2 layers200 × 115 mm

Musicbrain busboard v2
MarkWestbroek/MusicBrain
A central brain running on teensy or a lighter MCU to process any control signals (MIDI, CV, our own) into the same but adding logic, ADSRs, DCOs, CV matrices etc. to it
94 partsMIT - 2 layers95.3 × 161.9 mm

- 2 layers120 × 130 mm

SingularitySurfer V1
nkrackow/SingularitySurfer-FPGA-Lock-In-Amplifier
Repository for the development of an FPGA based DSP Lock-In Amplifier
174 parts80MIT - 2 layers24 × 38 mm

BSH Board
Bouni/BSH-Board
A board that interfaces the DBUS of several home appliances and brings them into Home-Assitant via ESPHome
75 parts65 - 2 layers47 × 50 mm

SDBox
jbilander/SDBox-v2
SDBox-v2 for Amiga, compatible with the new updated card-detect firmware
22 parts53GPL-3.0
Questions
What parts does the Schmitt trigger test use?
8 parts, built around the 74LVC1G17Z and 1N4148WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Schmitt trigger test KiCad files?
From the formicidae-tracker/hardware repository on GitHub, at the commit this page was made from: the board is ecad/misc/schmitt-trigger-test/schmitt-trigger-test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Schmitt trigger test design in my own project?
Its repository states no licence, so its author keeps all rights: ask formicidae-tracker before reusing the design.