4 layers46.8 × 52.4 mm
4 layers46.8 × 52.4 mm
Overcomplicated 3D Printer Design
- Size
- 46.8 × 52.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 146
- Nets
- 135
- Pads
- 826
- Tracks, vias
- 723, 145
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Sep 2021
- Updated
- 25 May 2025
Overview
VORTAC is an open-source printed circuit board by FoCTow, from the FoCTow/ToolchangerDevelopment repository on GitHub. It is a 4-layer board of 46.8 × 52.4 mm with 146 parts on 135 nets, routed with 723 tracks and 145 vias.
It is built around the SN65HVD232DR-JSM, TPS54335ADRCR and ADXL345BCCZ-RL, with the TLV73333PDBV, TMC2209-LA and WSD4066DN33 among its other parts. Its parts include 52 resistors, 49 capacitors, 16 connectors, 7 ICs and 7 diodes. It belongs with the STM32 boards of this library.
Main components
7
SN65HVD232DR-JSM
SOP-8-40℃~+125℃ 1 2mA 3.3V 5Mbps CAN Transceiver ESD protection、Thermal shutdown protection、Short-Circuit Protection SOP-8 CAN Transceivers ROHSJSMSEMICAN Transceivers
TPS54335ADRCR
VSON-10-EP(3x3)-40℃~+150℃@(TJ) 1 1.5MHz 310uA 3A 4.5V~28V 800mV~24V Adjustable Buck Buck Built-in Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
ADXL345BCCZ-RL
LGA-14-40℃~+85℃ 100nA 13bit 2V~3.6V Accelerometer SPI、I2C X,Y,Z ±16g LGA-14(3x5) Accelerometers ROHSAnalog DevicesAccelerometers
TLV73333PDBV
SOT-23-5-40℃~+125℃@(Tj) 1 125mV@(300mA) 28uVrms 3.3V 300mA 34uA 5.5V 50dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TMC2209-LA
QFN-28-EP_5x5QFN-28-EP(5x5) SMT ROHSAnalog DevicesUncategorised
WSD4066DN33
DFN3X3-8L1.68W 17mΩ@10V 2 N-Channel 22nC@10V 28A 2V 40V 60pF 815pF 95pF N-Channel DFN3X3-8L MOSFETs ROHSWinsok SemiconMOSFETs
918-418K2023S40001
SMD-40℃~+80℃ 1 10000 times 16P 3A 7.35mm Female Surface Mount, Right Angle Type-C USB 3.1 SMD USB Connectors ROHSJing Extension of the Electronic Co.USB Connectors
README
README.mdToolchangerDevelopment
Overengineered 3D Printer Design
Parts
146| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 10K | Resistor_SMD:R_0402_1005Metric | R12, R13, R14, R15, R16, R21, R39, R40, R41, R42, R43, R44, R45, R46, R47, R48 +4 |
| 11 | 0.1uF 16V | Capacitor_SMD:C_0402_1005Metric | C2, C33, C35, C36, C37, C38, C39, C46, C47, C48, C49 |
| 11 | 0.1uF 50V | Capacitor_SMD:C_0603_1608Metric | C6, C7, C9, C11, C21, C22, C24, C26, C29, C31, C41 |
| 6 | 100K | Resistor_SMD:R_0402_1005Metric | R5, R6, R17, R18, R19, R20 |
| 5 | 100R | Resistor_SMD:R_0402_1005Metric | R7, R8, R9, R10, R11 |
| 4 | 470pF 100V | Capacitor_SMD:C_0603_1608Metric | C25, C27, C28, C30 |
| 4 | D | Diode_SMD:D_SOD-923 | D1, D2, D3, D4 |
| 3 | 10uF 50V | Capacitor_SMD:C_1206_3216Metric | C1, C4, C5 |
| 3 | 47uF | Capacitor_SMD:C_0805_2012Metric | C16, C18, C20 |
| 3 | 47uF | Capacitor_SMD:C_1206_3216Metric | C15, C17, C19 |
| 2 | 0.1R 1% | Resistor_SMD:R_1206_3216Metric | R30, R34 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R26, R28 |
| 2 | 10uH | ToolChanger:L_Sunlord_MWSA0518_5.4x5.2mm | L1, L2 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3, C8 |
| 2 | 22K | Resistor_SMD:R_0402_1005Metric | R32, R33 |
| 2 | 22R | Resistor_SMD:R_0402_1005Metric | R35, R36 |
| 2 | 4.7uF 10V | Capacitor_SMD:C_0402_1005Metric | C32, C40 |
| 2 | 5.12K | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 95k | Resistor_SMD:R_0402_1005Metric | R24, R25 |
| 2 | C_Small | Capacitor_SMD:C_0402_1005Metric | C42, C43 |
| 2 | M3 | MountingHole:MountingHole_3mm_Pad_Via | H1, H2 |
| 2 | MillMax_004 | ToolChanger:MillMax-858-10-004-10-012000 | J3, J4 |
| 2 | Q_NMOS_GSD | ToolChanger:IRF9310PbF-1_SO-8_ThermalPad | Q2, Q4 |
| 2 | R_Small | Resistor_SMD:R_0402_1005Metric | R37, R38 |
| 2 | TPS54335ADRCR | ToolChanger:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm_ThermalVias | U3, U4 |
| 2 | WSD4066DN | ToolChanger:WSD4066DN_ThermalPad | Q3, Q5 |
| 1 | 100uF 35V | Capacitor_SMD:CP_Elec_8x6.9 | C34 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C44 |
| 1 | 10uH 15mA | Inductor_SMD:L_0805_2012Metric | L3 |
| 1 | 19.1k | Resistor_SMD:R_0402_1005Metric | R29 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R31 |
| 1 | 1K .1% | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C45 |
| 1 | 22nF X7R 10% 50V | Capacitor_SMD:C_0603_1608Metric | C23 |
| 1 | 3.3nF | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 30pF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 36.5k | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 360pF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 4.7K .1% | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 56pF | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 7.15k | Resistor_SMD:R_0402_1005Metric | R27 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | HSE1 |
| 1 | 918-418K2023S40001 | ToolChanger:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J14 |
| 1 | ADXL345BCCZ-RL | Package_LGA:LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y | U5 |
| 1 | DATA_H JUMPER | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP1 |
| 1 | DATA_L JUMPER | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP2 |
| 1 | DEBUG | ToolChanger:PinHeader_2x03_P1.27mm_Vertical | J1 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123 | D5 |
| 1 | FAN_01 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J7 |
| 1 | FAN_01_V | ToolChanger:PinHeader_2x03_P1.27mm_Vertical | J10 |
| 1 | FAN_02 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J8 |
| 1 | FAN_02_V | ToolChanger:PinHeader_2x03_P1.27mm_Vertical | J11 |
| 1 | HOTEND | ToolChanger:Molex_Micro-Fit_3.0_43045-0412_2x02_P3.00mm_Vertical | J6 |
| 1 | IO | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J16 |
| 1 | LED | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J9 |
| 1 | LED_Small | LED_SMD:LED_0402_1005Metric | D6 |
| 1 | LED_V | ToolChanger:PinHeader_2x03_P1.27mm_Vertical | J12 |
| 1 | Molex Micro Fit 3.0 | ToolChanger:Molex_Micro-Fit_3.0_43045-0612_2x03_P3.00mm_Vertical | J2 |
| 1 | NeoPixel_THT | LED_SMD:LED_Cree-PLCC4_2x2mm_CW | D7 |
| 1 | Q_NPN_BEC | Package_TO_SOT_SMD:SOT-23 | Q7 |
| 1 | Q_PMOS_GSD | ToolChanger:IRF9310PbF-1_SO-8_ThermalPad | Q1 |
| 1 | Q_PNP_BEC | Package_TO_SOT_SMD:SOT-23 | Q6 |
| 1 | SN65HVD232DR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | STEPPER | ToolChanger:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J15 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | THERM_R | ToolChanger:PinHeader_2x02_P1.27mm_Vertical | J13 |
| 1 | TLV73333PDBV | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | TMC2209-LA | ToolChanger:tmc_2209_ThermalPad | IC1 |
| 1 | USB_HOST | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J5 |
Questions
How big is the VORTAC PCB?
It measures 46.8 × 52.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the VORTAC use?
146 parts, built around the SN65HVD232DR-JSM, TPS54335ADRCR, ADXL345BCCZ-RL and TLV73333PDBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VORTAC KiCad files?
From the FoCTow/ToolchangerDevelopment repository on GitHub, at the commit this page was made from: the board is PCB/VORTAC/KiCAD/VORTAC/VORTAC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the VORTAC design in my own project?
Its repository states no licence, so its author keeps all rights: ask FoCTow before reusing the design.
More from FoCTow/ToolchangerDevelopment
2- 4 layers68.4 × 24.7 mm
Similar boards
- 4 layers80 × 80.6 mm
Vortac Panel REV1
VortacDesign/VortacToolchanger
Modular toolchanger system for 3D printers – designed for VORON-style machines. Includes mechanical files, wiring guides, firmware configuration and setup scripts.
155 parts1Apache-2.0 - 8 layers38.5 × 38.5 mm
Flight Controller
rishikesh2715/STM32F7_FC
STM32F722RET6 Based Flight Controller with ICM-42688-P IMU, BMP388 Barometer, and much more!
133 parts57MIT - 2 layers36 × 38 mm
- 4 layers81.1 × 85 mm
STS1 EDU V3 0
SpaceTeam/STS1_EDU_Hardware
Contains all Hardware Informations from EDU 2.6 onwards
108 parts2 - 4 layers65 × 56 mm
EDU V3 0 Raspi Hat
SpaceTeam/EDU_RASPI_HATS
This Repo contains the EDU Raspberry Pi hats from STS1.
38 parts - 4 layers431.5 × 125.5 mm
Clavier
lsartory/Clavier
An FPGA-based mechanical keyboard with an integrated USB hub and communication interfaces
344 parts212 - 2 layers240 × 174.3 mm
Final H00 panelicad pcb
Vedatori/Time-O-Mat
Addressable LED clock kit aimed for usage in STEM education. The ultimate solution to time telling...
312 parts7 - 2 layers60 × 100 mm
PaLampa MoBo H00
Vedatori/PaLampa
Mechanickou část lze rozdělit na dvě hlavní části - spodní krabici a horní lampu. Vnější části krabice jsou vyřezány z překližky na laserové řezačce a obsahují zámkové západky.
80 parts4